• Practice
  • About 15 min
  • 5 practice questions

Coordinates of a point: abscissa and ordinate

Write the coordinates (x, y) of a point from its signed perpendicular distances to the axes, use the words abscissa and ordinate, and understand why (x, y) and (y, x) are usually different points.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Find the x-coordinate (abscissa) and the y-coordinate (ordinate) of a point, with the correct signs.
  • Write the coordinates of a point as an ordered pair (x, y).
  • Locate a point in the plane when its coordinates are given.

In Lesson 3 we described points in words, such as '5 units right of the y-axis and 2 units above the x-axis'. Coordinates turn these words into a short, exact address of two signed numbers.

The two coordinates

  1. The x-coordinate of a point is its perpendicular distance from the y-axis, measured along the x-axis: positive if the point is on the OX side (right), negative if on the OX' side (left). It is also called the abscissa.
  2. The y-coordinate of a point is its perpendicular distance from the x-axis, measured along the y-axis: positive if the point is on the OY side (above), negative if on the OY' side (below). It is also called the ordinate.
  3. We write the x-coordinate first and then the y-coordinate, inside brackets: (x, y).

Coordinates (x, y): x = abscissa = signed distance from the y-axis; y = ordinate = signed distance from the x-axis. The x-coordinate is always written first.

— Coordinates of a point

Worked example 1: from distances to coordinates

Point A from Lesson 3 is 5 units from the y-axis on the right and 2 units from the x-axis above. So its abscissa is +5, its ordinate is +2, and A = (5, 2). Point B is 3 units from the y-axis on the left and 4 units from the x-axis below. So its abscissa is −3, its ordinate is −4, and B = (−3, −4).

Worked example 2: reading points from descriptions

Made-up points read from their positions
PointDistance from y-axisDistance from x-axisCoordinates
C2 units, left6 units, above(−2, 6)
D7 units, right1.5 units, below(7, −1.5)
E4 units, left4 units, below(−4, −4)
F1 unit, right9 units, above(1, 9)

Writing the coordinates of a point P

  1. Drop a perpendicular to the x-axis its foot shows how far right or left P is
  2. Write the x-coordinate + if right of the y-axis, − if left
  3. Measure up or down to P the distance from the x-axis
  4. Write the y-coordinate + if above the x-axis, − if below
  5. Put them in order (x-coordinate, y-coordinate)

Locating a point from its coordinates

The steps also work backwards. To find the point (−4, 3), start at O, move 4 units along OX' (because the x-coordinate is −4), and from there move 3 units parallel to OY (because the y-coordinate is +3). For (2.5, −1), move 2.5 units along OX and then 1 unit parallel to OY'. The first number always tells you how far to go left or right; the second, how far up or down.

Order matters

The coordinates describe a point uniquely, but only if we keep the order. (2, 7) is 2 units right and 7 units up, while (7, 2) is 7 units right and 2 units up: two different points. The textbook remarks that the world could have agreed to write the ordinate first, but everyone uses the same convention, x first, so that there is no confusion.

Worked example 3: spot the mistake

A student says the point 3 units to the left of the y-axis and 8 units above the x-axis is (8, −3). Two things are wrong. The x-coordinate must come first, and it is negative because the point is on the left; the y-coordinate is positive because the point is above. The correct coordinates are (−3, 8).

Key takeaways: the abscissa (x-coordinate) is the signed distance from the y-axis and the ordinate (y-coordinate) is the signed distance from the x-axis. Write them as (x, y), x first. Signs come from the side of each axis the point lies on. Swapping the numbers usually gives a different point.

Check your understanding

  1. 1. What is the abscissa of the point (−7, 3)?

    1. 3
    2. −7
    3. 7
    4. −3
    Show answer

    Answer: B. The abscissa is the x-coordinate, the first number in the pair: −7. The ordinate is 3.

  2. 2. A point is 4 units to the right of the y-axis and 9 units below the x-axis. What are its coordinates?

    1. (−9, 4)
    2. (4, 9)
    3. (4, −9)
    4. (−4, −9)
    Show answer

    Answer: C. Right of the y-axis gives x = +4; below the x-axis gives y = −9. Written x first: (4, −9).

  3. 3. The ordinate of a point is another name for its

    1. y-coordinate
    2. x-coordinate
    3. origin
    4. distance from the origin
    Show answer

    Answer: A. The ordinate is the y-coordinate, the signed distance of the point from the x-axis. The abscissa is the x-coordinate.

  4. 4. A point P is 2 units from the y-axis, on its left, and 5 units from the x-axis, above it. What are its coordinates?

    1. (5, −2)
    2. (2, 5)
    3. (−5, 2)
    4. (−2, 5)
    Show answer

    Answer: D. The distance from the y-axis gives the x-coordinate: −2 (left). The distance from the x-axis gives the y-coordinate: +5 (above). So P = (−2, 5).

  5. 5. What can you say about the points (2, 7) and (7, 2)?

    1. They are the same point
    2. They are different points
    3. They are the same only on the x-axis
    4. It cannot be decided
    Show answer

    Answer: B. (2, 7) is 2 right and 7 up; (7, 2) is 7 right and 2 up. Coordinates are ordered, so these are different points.

Privacy · Terms · Refunds · Delivery