Revision notes

Chapter 3 Coordinate Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Why we need two reference lines

Narrowing down a position

  1. No information the dot could be anywhere on the sheet
  2. 6 cm from the left edge the dot is somewhere on one line
  3. Also 8 cm above the bottom edge only one point fits: the position is fixed
A made-up seating plan
StudentColumnRowPosition (column, row)
Gurpreet26(2, 6)
Navdeep62(6, 2)
Simran11(1, 1)
Arjun53(5, 3)

To fix the position of a point in a plane we need two independent pieces of information, given in an agreed order.

— The key idea

Key takeaways: one number fixes a point on a line; a point in a plane needs two, such as street and house number, distances from two edges, or column and row. Write the pair in an agreed order, because (a, b) and (b, a) are usually different positions. René Descartes developed this idea into the Cartesian system.

Read the full lesson

Lesson 2

The number line and the coordinate axes

The coordinate axes

  • x-axis (horizontal, X'X)
    • OX: positive direction, to the right of O
    • OX': negative direction, to the left of O
  • y-axis (vertical, Y'Y)
    • OY: positive direction, above O
    • OY': negative direction, below O
  • Origin O
    • where the axes cross
    • the zero of both number lines
The four directions from the origin
RayAxisDirectionNumbers on it
OXx-axisright of Opositive: 1, 2, 3, ...
OX'x-axisleft of Onegative: −1, −2, −3, ...
OYy-axisabove Opositive: 1, 2, 3, ...
OY'y-axisbelow Onegative: −1, −2, −3, ...

The x-axis is horizontal and the y-axis is vertical; they cross at right angles at their zeroes, the origin O. OX and OY are the positive directions, OX' and OY' the negative ones.

— The axes in one sentence

Key takeaways: a number line marks numbers by signed distance from the origin. Two number lines placed at right angles, crossing at their zeroes, make the x-axis (horizontal) and the y-axis (vertical). Right and up are positive; left and down are negative.

Read the full lesson

Lesson 3

The Cartesian plane and its four quadrants

The four quadrants

  • Quadrant I
    • between OX and OY
    • right of the y-axis
    • above the x-axis
  • Quadrant II
    • between OX' and OY
    • left of the y-axis
    • above the x-axis
  • Quadrant III
    • between OX' and OY'
    • left of the y-axis
    • below the x-axis
  • Quadrant IV
    • between OX and OY'
    • right of the y-axis
    • below the x-axis
Numbered anticlockwise, starting from OX.
Placing points by description
Description of the pointLeft or right of y-axisAbove or below x-axisQuadrant
6 units left of the y-axis, 1 unit above the x-axisleftaboveII
2 units right of the y-axis, 7 units below the x-axisrightbelowIV
4 units left of the y-axis, 4 units below the x-axisleftbelowIII
0 units from the y-axis, 3 units above the x-axison the y-axisabovenone: on the y-axis

Quadrants I, II, III and IV are numbered anticlockwise from OX. A point's distance from the y-axis says how far left or right it is; its distance from the x-axis says how far up or down it is.

— Remember

Key takeaways: the axes divide the plane into four quadrants, numbered anticlockwise from OX; points on the axes belong to no quadrant. Drop perpendiculars to both axes to measure a point's distances. Right and above are the positive directions; left and below are the negative directions.

Read the full lesson

Lesson 4

Coordinates of a point: abscissa and ordinate

Coordinates (x, y): x = abscissa = signed distance from the y-axis; y = ordinate = signed distance from the x-axis. The x-coordinate is always written first.

— Coordinates of a point
Made-up points read from their positions
PointDistance from y-axisDistance from x-axisCoordinates
C2 units, left6 units, above(−2, 6)
D7 units, right1.5 units, below(7, −1.5)
E4 units, left4 units, below(−4, −4)
F1 unit, right9 units, above(1, 9)

Writing the coordinates of a point P

  1. Drop a perpendicular to the x-axis its foot shows how far right or left P is
  2. Write the x-coordinate + if right of the y-axis, − if left
  3. Measure up or down to P the distance from the x-axis
  4. Write the y-coordinate + if above the x-axis, − if below
  5. Put them in order (x-coordinate, y-coordinate)

Key takeaways: the abscissa (x-coordinate) is the signed distance from the y-axis and the ordinate (y-coordinate) is the signed distance from the x-axis. Write them as (x, y), x first. Signs come from the side of each axis the point lies on. Swapping the numbers usually gives a different point.

Read the full lesson

Lesson 5

Points on the axes and signs in each quadrant

Signs of (x, y) in the four quadrants

  • Quadrant I: (+, +)
    • right and above
    • e.g. (3, 5)
  • Quadrant II: (−, +)
    • left and above
    • e.g. (−4, 7)
  • Quadrant III: (−, −)
    • left and below
    • e.g. (−0.5, −2)
  • Quadrant IV: (+, −)
    • right and below
    • e.g. (3, −8)
Here + stands for a positive real number and − for a negative real number.
Reading the position from the coordinates
PointSignsWhere it lies
(3, −8)(+, −)Quadrant IV
(−0.5, −2)(−, −)Quadrant III
(0, −6)x = 0On the y-axis, below the origin
(−9, 0)y = 0On the x-axis, left of the origin
(√2, 5)(+, +)Quadrant I
(−4, 7)(−, +)Quadrant II

On the x-axis: (x, 0). On the y-axis: (0, y). Origin: (0, 0). Quadrant I (+, +), II (−, +), III (−, −), IV (+, −).

— The patterns to remember

Key takeaways: a zero coordinate puts a point on an axis: y = 0 on the x-axis, x = 0 on the y-axis, both zero at the origin. Otherwise the signs decide the quadrant: (+, +) I, (−, +) II, (−, −) III, (+, −) IV. (x, y) = (y, x) only when x = y.

Read the full lesson

Privacy · Terms · Refunds · Delivery