- Practice
- About 16 min
- 5 practice questions
Energy conversions and the law of conservation of energy
Trace energy changes in nature and in gadgets, state the law of conservation of energy, and show for a falling object that mgh + ½mv² stays constant.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give examples of energy changing from one form to another.
- State the law of conservation of energy.
- Define mechanical energy.
- Fill in potential and kinetic energy at different heights of a falling object.
- Explain a swinging pendulum in terms of energy.
Energy is useful because it can change form. Green plants turn light from the Sun into chemical energy stored in food. The Sun heats air unevenly, so air moves as wind. Fuels such as coal and petroleum store chemical energy that came from ancient living things. The PSEB textbook asks students to look for such conversions in nature and in the gadgets they use.
Energy conversions around us
| Process or gadget | Energy in | Main energy out |
|---|---|---|
| Photosynthesis in a leaf | Light | Chemical (food) |
| Electric bulb | Electrical | Light and heat |
| Electric fan | Electrical | Kinetic (moving blades) |
| Torch cell | Chemical | Electrical |
| Riding a bicycle | Chemical (from food, in muscles) | Kinetic, with some heat |
| Water falling on a turbine | Potential, then kinetic | Kinetic of the turbine |
The law of conservation of energy
Whenever energy changes form, the total amount stays the same. The law of conservation of energy states that energy can only be converted from one form to another; it can neither be created nor destroyed. The total energy before and after a transformation remains the same. The textbook stresses that this law holds in all situations and for every kind of transformation.
Energy can neither be created nor destroyed, only changed from one form to another. Total energy before = total energy after.
A freely falling object
Let an object of mass m fall freely from height h, ignoring air resistance. At the top it is at rest, so its kinetic energy is zero and its total energy is mgh. As it falls, its height decreases and its speed increases: potential energy turns into kinetic energy. Just before it reaches the ground, h is practically zero and the speed is greatest, so almost all the energy is kinetic. At every point, mgh + ½mv² = constant. The sum of kinetic and potential energy is the object's mechanical energy.
Energy in a free fall
- At the top All potential energy, kinetic energy zero
- Halfway down Half potential, half kinetic
- Just above the ground All kinetic energy, potential energy almost zero
Worked example 1: completing an energy table
Question: A 4 kg ball is dropped from a height of 5 m. Taking g = 10 m s⁻², find its potential energy, kinetic energy and total energy at 5 m, 3 m, 1 m and just above the ground. Working: Total energy = mgh at the top = 4 × 10 × 5 = 200 J. At each height Ep = 4 × 10 × h = 40h, and Ek = 200 − Ep.
| Height (m) | Ep = mgh (J) | Ek (J) | Ep + Ek (J) |
|---|---|---|---|
| 5 | 200 | 0 | 200 |
| 3 | 120 | 80 | 200 |
| 1 | 40 | 160 | 200 |
| Just above the ground | 0 | 200 | 200 |
The speed just above the ground follows from ½mv² = 200 J: ½ × 4 × v² = 200, so 2v² = 200, v² = 100 and v = 10 m s⁻¹. Check with the third equation of motion: v² = 2gh = 2 × 10 × 5 = 100, so v = 10 m s⁻¹, the same answer.
Worked example 2: halfway down
Question: A 6 kg object is held 8 m above the ground and released. Find its kinetic energy when it is halfway down (g = 10 m s⁻²). Working: Starting energy = mgh = 6 × 10 × 8 = 480 J, all potential. Halfway, h = 4 m, so Ep = 6 × 10 × 4 = 240 J. By conservation, Ek = 480 J − 240 J = 240 J.
A swinging pendulum
Pull a pendulum bob to one side and you raise it slightly, giving it potential energy. Released, it swings down: at the lowest point its potential energy is least and its kinetic energy (speed) is greatest. It then rises on the other side, slowing down as kinetic energy changes back into potential energy. The bob slowly comes to rest because air resistance and friction at the support turn its mechanical energy into heat. The energy is not destroyed, so the law of conservation of energy is not broken.
Energy in one swing of a pendulum
- Extreme position: maximum potential energy, at rest
- Lowest point: maximum kinetic energy
- Other extreme: maximum potential energy again
- Lowest point again: maximum kinetic energy
Then back to step 1: Extreme position: maximum potential energy, at rest
Key takeaways: energy changes form all the time, in nature and in machines, but the total never changes. For a freely falling object the loss in potential energy equals the gain in kinetic energy, so mechanical energy mgh + ½mv² stays constant. When motion dies away, the energy has become heat, not vanished.
Check your understanding
-
1. What is the main energy conversion in an electric fan?
- Electrical to kinetic
- Chemical to electrical
- Kinetic to electrical
- Light to chemical
Show answer
Answer: A. A fan uses electrical energy to turn its blades, so electrical energy becomes kinetic energy (with a little heat and sound). Chemical to electrical happens in a cell; light to chemical in photosynthesis.
-
2. A 2 kg stone falls from 10 m (g = 10 m s⁻²). Ignoring air resistance, what is its kinetic energy when it is 4 m above the ground?
- 80 J
- 200 J
- 120 J
- 40 J
Show answer
Answer: C. Total energy = mgh = 2 × 10 × 10 = 200 J. At 4 m, Ep = 2 × 10 × 4 = 80 J, so Ek = 200 − 80 = 120 J. 80 J is the potential energy at that point, not the kinetic energy.
-
3. Which statement is the law of conservation of energy?
- Energy is used up when work is done
- Energy can be created by machines
- Kinetic energy always stays constant
- Energy can be changed from one form to another but cannot be created or destroyed
Show answer
Answer: D. The law says energy only changes form; the total stays the same. It is the total energy, not kinetic energy alone, that is constant, and no machine creates energy.
-
4. A swinging pendulum finally stops. Where has its mechanical energy gone?
- It has been destroyed
- It has become heat because of air resistance and friction
- It is still stored as kinetic energy
- It has turned into mass
Show answer
Answer: B. Air resistance and friction at the support turn mechanical energy into heat in the surroundings. The energy still exists, so conservation of energy is not violated.
-
5. Mechanical energy of an object means:
- only its kinetic energy
- only its potential energy
- the sum of its kinetic and potential energy
- its heat energy
Show answer
Answer: C. The chapter defines mechanical energy as kinetic energy + potential energy. For a freely falling object this sum, mgh + ½mv², stays constant.
Sign in to keep track of the lessons you finish.