• Practice
  • About 16 min
  • 5 practice questions

Irrigation, cropping patterns, crop protection and grain storage

Describe irrigation systems and rainwater harvesting, tell mixed cropping, intercropping and crop rotation apart, explain the control of weeds, pests and diseases, and how stored grain is protected.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why irrigation matters and describe wells, canals, river lift systems and tanks.
  • Explain how check-dams and watershed management help.
  • Distinguish mixed cropping, intercropping and crop rotation.
  • Describe how weeds, insect pests and diseases harm crops and how they are controlled.
  • List causes of storage losses and how they are prevented.

Good seed and good nutrition are not enough: crops also need water at the right time, a sensible pattern of planting and protection from weeds, pests and diseases, both in the field and in storage. These ideas complete the crop part of the PSEB textbook's chapter.

Irrigation

Most agriculture in India is rain-fed: success depends on timely monsoons and enough rain through the growing season, so poor monsoons cause crop failure. Drought occurs because of scarce or irregularly distributed rain and threatens rain-fed farming. Giving crops water at the right stages raises yields, so more land is being brought under irrigation. Because India has varied water resources and climate, different systems are used.

Irrigation systems
SystemHow it works
Dug wellsCollect water from water-bearing strata; water is lifted by pumps
Tube wellsTap water from deeper strata; water is lifted by pumps
CanalsReceive water from reservoirs or rivers; the main canal divides into branch canals and distributaries that reach the fields
River lift systemsDraw water directly from rivers for fields near them, where canal flow is insufficient or irregular
TanksSmall storage reservoirs that catch and store run-off from small catchment areas

Newer approaches are rainwater harvesting and watershed management. Small check-dams stop rainwater from running away, which raises groundwater levels and also reduces soil erosion.

Cropping patterns

Three cropping patterns

  • Mixed cropping
    • Two or more crops together on the same land
    • Examples: wheat + gram, wheat + mustard, groundnut + sunflower
    • Reduces risk if one crop fails
  • Intercropping
    • Two or more crops together in a definite row pattern
    • Examples: soyabean + maize, bajra + lobia
    • Crops chosen with different nutrient needs
  • Crop rotation
    • Different crops grown one after another in a pre-planned order
    • Choice depends on moisture and irrigation
    • Two or three good harvests a year possible

In intercropping, a few rows of one crop alternate with a few rows of another. Because the crops need different nutrients, the nutrients supplied are used fully, and pests and diseases cannot spread to every plant of one crop in the field, so both crops give better returns.

Worked example 1: naming the pattern

Question: Name the pattern in each case. (a) Seeds of wheat and gram are sown together on one plot without any row arrangement. (b) Two rows of maize alternate with three rows of soyabean. (c) Paddy is followed by wheat, then by a short pulse crop, in a planned sequence. Answer: (a) Mixed cropping. (b) Intercropping, because there is a definite row pattern. (c) Crop rotation, because different crops follow one another in a pre-planned succession.

Crop protection management

Weeds are unwanted plants in a cultivated field, such as Xanthium (gokhroo), Parthenium (gajar ghas) and Cyperinus rotundus (motha). They compete with the crop for food, space and light, so removing them in the early stages of crop growth is essential. Insect pests harm plants in three ways: they cut the root, stem and leaf; they suck cell sap; and they bore into stems and fruits. Plant diseases are caused by pathogens such as bacteria, fungi and viruses, carried in soil, water and air.

Controlling weeds, pests and diseases

  • Chemical
    • Pesticides: herbicides, insecticides, fungicides
    • Sprayed on crops or used to treat seeds and soil
    • Overuse poisons other species and pollutes
  • Mechanical
    • Removing weeds by hand or tools
  • Preventive
    • Proper seed-bed preparation
    • Timely sowing
    • Intercropping and crop rotation
    • Resistant varieties
    • Summer ploughing: deep ploughing in summer to destroy weeds and pests

Storage of grains

Storage losses can be very high. Biotic causes are insects, rodents, fungi, mites and bacteria; abiotic causes are unsuitable moisture and temperature in the store. These lead to poorer quality, loss of weight, poor germination and discolouration, so the produce sells poorly. Losses are controlled by proper treatment and systematic warehouse management. Before storage, the produce is cleaned strictly, dried first in sunlight and then in shade, and fumigated with chemicals that kill pests.

Worked example 2: a weedy field

Question: Simran's family sowed a good maize variety, irrigated on time and added fertilizer, but did not remove weeds in the first weeks. The yield was poor. Explain why, and suggest two preventive steps for next season. Answer: The weeds competed with the young maize for nutrients, space and light, and took up much of the fertilizer meant for the crop, so the crop grew poorly. Good seed and inputs cannot make up for missing crop protection. For next season: prepare the seed bed properly and sow on time, and remove weeds early (by hand or tools); deep summer ploughing and rotating crops also reduce weeds.

Water at the right time, the right pattern of crops, and protection in the field and the store: each step saves part of the harvest.

Key takeaways: most Indian farming is rain-fed, so wells, canals, river lift systems, tanks and check-dams are used to supply water. Mixed cropping lowers risk, intercropping uses nutrients well and limits pests, and crop rotation gives several harvests a year. Weeds, pests and diseases are controlled by chemical, mechanical and preventive methods, and stored grain is protected by cleaning, drying and fumigation.

Check your understanding

  1. 1. Which irrigation system stores the run-off from small catchment areas?

    1. Tube wells
    2. River lift systems
    3. Canals
    4. Tanks
    Show answer

    Answer: D. Tanks are small storage reservoirs that intercept and store run-off from small catchment areas. Tube wells tap deep groundwater; lift systems and canals take water from rivers or reservoirs.

  2. 2. Growing soyabean and maize in alternate rows on the same field is:

    1. mixed cropping
    2. crop rotation
    3. intercropping
    4. summer ploughing
    Show answer

    Answer: C. Growing two crops together in a definite row pattern is intercropping. Mixed cropping has no row pattern; crop rotation grows crops one after another.

  3. 3. Why are weeds harmful to crops?

    1. They compete with crops for food, space and light
    2. They add nitrogen to the soil
    3. They attract rainfall
    4. They are always poisonous to animals
    Show answer

    Answer: A. Weeds take up nutrients and compete for space and light, so they reduce crop growth. That is why they must be removed early.

  4. 4. Check-dams help agriculture mainly by:

    1. adding fertilizer to fields
    2. stopping rainwater from running away, raising groundwater and reducing soil erosion
    3. pumping water from deep strata
    4. killing insect pests
    Show answer

    Answer: B. Check-dams hold back rainwater so that more of it soaks into the ground, raising groundwater levels and reducing erosion.

  5. 5. Which is an abiotic cause of losses in stored grain?

    1. Rodents
    2. Mites
    3. Unsuitable moisture and temperature
    4. Fungi
    Show answer

    Answer: C. Moisture and temperature are non-living (abiotic) factors. Rodents, mites and fungi are living (biotic) causes.

Privacy · Terms · Refunds · Delivery