Revision notes

Chapter 2 Is Matter Around Us Pure?: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Pure substances and mixtures: homogeneous and heterogeneous

Homogeneous and heterogeneous mixtures

  • Homogeneous (solution)
    • Same composition in every part
    • Boundaries between parts cannot be seen
    • Example: sugar in water
    • Example: air, soda water, vinegar
  • Heterogeneous
    • Composition differs from part to part
    • Separate parts can be seen
    • Example: oil and water
    • Example: sand and salt, soil, wood

Pure substance: one kind of particle, fixed properties. Mixture: two or more pure substances, separable by physical methods. Homogeneous = uniform throughout; heterogeneous = visibly distinct parts.

Key takeaways: in science, pure means made of one kind of particle, not merely unadulterated. A mixture contains more than one pure substance. Homogeneous mixtures (solutions) are uniform but may have different strengths; heterogeneous mixtures have visible parts and are not uniform.

Read the full lesson

Lesson 2

Solutions: solute, solvent, properties, saturation and solubility

Examples of solutions
SolutionSoluteSolventType
Sugar in waterSugar (solid)Water (liquid)Solid in liquid
Tincture of iodineIodine (solid)Alcohol (liquid)Solid in liquid
Soda water and other aerated drinksCarbon dioxide (gas)Water (liquid)Gas in liquid
AirOxygen and other gasesNitrogen (gas)Gas in gas
Brass (an alloy)ZincCopperSolid in solid

From unsaturated to crystals

  1. Unsaturated More solute can still dissolve
  2. Saturated No more dissolves at this temperature
  3. Warm it More solute dissolves
  4. Cool it Extra solute comes out as crystals

Solution = solute (dissolved, smaller amount) + solvent (dissolving, larger amount). Saturated: no more solute dissolves at that temperature. Solubility: the amount of solute in the saturated solution at that temperature.

Key takeaways: solutions are homogeneous and may be liquid, solid (alloys) or gaseous (air). Their particles are below 1 nm, do not scatter light, pass through filter paper and never settle. Each solute has its own solubility, which for most solids rises with temperature.

Read the full lesson

Lesson 3

Concentration of a solution: mass and volume percentages

Three ways to express concentration
MethodFormulaUsual units of the two amounts
Mass by mass percentage(mass of solute ÷ mass of solution) × 100both in grams
Mass by volume percentage(mass of solute ÷ volume of solution) × 100grams and millilitres
Volume by volume percentage(volume of solute ÷ volume of solution) × 100both in millilitres

Mass of solution = mass of solute + mass of solvent. Always divide by the SOLUTION, not the solvent.

Steps for any concentration problem

  1. Read the question Which percentage: mass/mass, mass/volume or volume/volume?
  2. Find the solution amount Add solute and solvent if needed
  3. Divide solute by solution Same kind of units as the method needs
  4. Multiply by 100 Then check by working backwards

Key takeaways: concentration tells how strong a solution is. Mass by mass, mass by volume and volume by volume percentages all have the amount of solute on top and the amount of solution at the bottom, multiplied by 100. Add solute and solvent to get the solution, and check every answer by reversing it.

Read the full lesson

Lesson 4

Suspensions, colloids and the Tyndall effect

Solution, colloid and suspension

  • Solution
    • Homogeneous
    • Particles below 1 nm, invisible
    • No Tyndall effect
    • Does not settle; passes through filter
  • Colloid
    • Looks homogeneous, really heterogeneous
    • Particles too small to see individually
    • Shows Tyndall effect
    • Does not settle; passes through filter; separated by centrifugation
  • Suspension
    • Heterogeneous
    • Particles visible to the naked eye
    • Scatters light
    • Settles on standing; separated by filtration
Common types of colloids
Dispersed phaseDispersion mediumTypeExamples
LiquidGasAerosolFog, clouds, mist
SolidGasAerosolSmoke, vehicle exhaust
GasLiquidFoamShaving cream
LiquidLiquidEmulsionMilk, face cream
SolidLiquidSolMilk of magnesia, mud
GasSolidFoamFoam rubber, sponge, pumice
LiquidSolidGelJelly, cheese, butter
SolidSolidSolid solColoured gemstone, milky glass

Tyndall effect = scattering of light by particles: shown by colloids and suspensions, never by true solutions. A colloid looks homogeneous but is heterogeneous.

Key takeaways: particle size decides everything. Solution particles are tiniest and do not scatter light; colloid particles scatter light but stay spread out and pass through filters; suspension particles are visible, scatter light, settle and are filtered off.

Read the full lesson

Lesson 5

Physical and chemical changes, elements and compounds

Sorting changes
ChangeTypeWhy
Folding a paper boatPhysicalStill paper; only the shape changes
Melting ghee in a panPhysicalChange of state only
Dissolving sugar in teaPhysicalSugar can be recovered by evaporation
Rusting of an iron gateChemicalRust is a new substance
Making chapati from doughChemicalCooking produces new substances
Souring of milk into curdChemicalNew substances with new taste

Elements

  • Metals
    • Lustrous (shiny, silvery-grey or golden-yellow)
    • Conduct heat and electricity
    • Ductile: drawn into wires
    • Malleable: hammered into sheets
    • Sonorous: ring when struck
    • Gold, silver, copper, iron, sodium; mercury is liquid at room temperature
  • Non-metals
    • Many different colours
    • Poor conductors of heat and electricity
    • Not lustrous, sonorous or malleable
    • Hydrogen, oxygen, iodine, carbon, bromine, chlorine
  • Metalloids
    • Properties between metals and non-metals
    • Boron, silicon, germanium
Mixtures and compounds
MixtureCompound
Substances just mix; no new substance formsElements react to form a new substance
Variable compositionFixed composition
Shows the properties of its constituentsHas totally different properties
Separated fairly easily by physical methodsSeparated only by chemical or electrochemical reactions

Matter: pure substances (elements or compounds) or mixtures (homogeneous or heterogeneous). A physical change makes no new substance; a chemical change does.

Key takeaways: physical changes alter form or state only; chemical changes create new substances. Elements cannot be simplified chemically and are metals, non-metals or metalloids. Compounds have fixed composition and new properties; mixtures keep their parts' properties and vary in composition.

Read the full lesson

Privacy · Terms · Refunds · Delivery