- Practice
- About 15 min
- 5 practice questions
Solutions: solute, solvent, properties, saturation and solubility
Name the solute and solvent in a solution, give examples of solid, liquid and gas solutions, list the properties of a solution and explain saturated solutions and solubility.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define a solution, a solute and a solvent.
- Give examples of solutions in which the solvent is a liquid, a solid or a gas.
- List four properties of a solution.
- Explain saturated and unsaturated solutions and solubility.
Shikanji, soda water and the air we breathe have something in common: each is the same in every part. Section 2.2 of the PSEB textbook (prepared by NCERT) defines a solution as a homogeneous mixture of two or more substances. A glass of lemonade tastes equally sweet at the top and at the bottom, which shows that the sugar particles are spread evenly. Solutions are homogeneous right down to the level of particles.
Solute and solvent
A solution has two kinds of components. The solvent is the component that dissolves the other; it is usually present in the larger amount. The solute is the component that is dissolved; it is usually present in the smaller amount.
| Solution | Solute | Solvent | Type |
|---|---|---|---|
| Sugar in water | Sugar (solid) | Water (liquid) | Solid in liquid |
| Tincture of iodine | Iodine (solid) | Alcohol (liquid) | Solid in liquid |
| Soda water and other aerated drinks | Carbon dioxide (gas) | Water (liquid) | Gas in liquid |
| Air | Oxygen and other gases | Nitrogen (gas) | Gas in gas |
| Brass (an alloy) | Zinc | Copper | Solid in solid |
We usually picture a solution as a liquid, but there are also solid solutions, the alloys, and gaseous solutions such as air. According to the textbook, air is a homogeneous mixture whose two main constituents are nitrogen (78%) and oxygen (21%), with small amounts of other gases.
Alloys are mixtures of two or more metals, or of a metal and a non-metal. They cannot be separated into their components by physical methods, yet they are counted as mixtures because they show the properties of their constituents and can have a variable composition. The textbook gives brass as roughly 30% zinc and 70% copper.
Properties of a solution
- A solution is a homogeneous mixture.
- Its particles are smaller than 1 nm (10⁻⁹ m) in diameter, so they cannot be seen even with a magnifying glass.
- Because the particles are so small they do not scatter a beam of light, so the path of a torch beam through a solution is not visible.
- The solute cannot be separated by filtration and does not settle when the solution is left undisturbed: a solution is stable.
Saturated and unsaturated solutions
Keep adding salt to 50 mL of water while stirring, and a point comes when no more dissolves and crystals stay at the bottom. At a given temperature, a solution that has dissolved as much solute as it can is a saturated solution. The amount of solute present in a saturated solution at that temperature is the solubility of the solute. A solution holding less solute than the saturation level is unsaturated.
The textbook's activity compares two solutes (common salt and sugar) in equal amounts of water: different substances dissolve in different amounts. So different substances have different solubilities in the same solvent at the same temperature. If the saturated solution is warmed by a few degrees, more of most solids dissolves, so solubility usually rises with temperature. If a hot saturated solution is cooled, the extra solute can no longer stay dissolved and comes out as crystals. (Heating should be done by the teacher with a water bath or gentle flame.)
From unsaturated to crystals
- Unsaturated More solute can still dissolve
- Saturated No more dissolves at this temperature
- Warm it More solute dissolves
- Cool it Extra solute comes out as crystals
Worked example 1: naming the parts
Question: a glass of ORS (oral rehydration solution) is made by dissolving sugar and salt in clean water. Name the solute(s), the solvent and the type of solution. Answer: sugar and salt are the solutes (solids, smaller amounts); water is the solvent (liquid, larger amount). It is a solid-in-liquid solution, and it is homogeneous: every sip tastes the same.
Worked example 2: saturated or not? (made-up data)
Question: suppose at room temperature at most 30 g of a salt X dissolves in 100 g of water. Riya dissolves 12 g of X in 50 g of water. Is her solution saturated? Working: 50 g of water is half of 100 g, so it can hold at most 30 ÷ 2 = 15 g of X. She has 12 g, which is less than 15 g, so the solution is unsaturated; she could dissolve 15 − 12 = 3 g more.
Solution = solute (dissolved, smaller amount) + solvent (dissolving, larger amount). Saturated: no more solute dissolves at that temperature. Solubility: the amount of solute in the saturated solution at that temperature.
Key takeaways: solutions are homogeneous and may be liquid, solid (alloys) or gaseous (air). Their particles are below 1 nm, do not scatter light, pass through filter paper and never settle. Each solute has its own solubility, which for most solids rises with temperature.
Check your understanding
-
1. In tincture of iodine, which is the solvent?
- Iodine
- Water
- Alcohol
- Carbon dioxide
Show answer
Answer: C. Tincture of iodine is iodine (solid, the solute) dissolved in alcohol (liquid, the solvent).
-
2. Why is the path of a torch beam not visible in a salt solution?
- The particles are smaller than 1 nm and do not scatter light
- Salt absorbs all the light
- The particles are too big
- Salt solutions are heterogeneous
Show answer
Answer: A. Particles of a true solution are smaller than about 1 nm, too small to scatter a beam of light, so the beam's path cannot be seen.
-
3. Brass is called a mixture even though its parts cannot be separated by physical methods. Why?
- It is made of one element
- It has no fixed properties at all
- It is a gas
- It shows the properties of its constituents and can have a variable composition
Show answer
Answer: D. An alloy like brass keeps the properties of copper and zinc and the proportions can vary, which is how mixtures behave. A compound would have a fixed composition and new properties.
-
4. Suppose at most 40 g of a salt dissolves in 100 g of water at a certain temperature. How much can dissolve in 250 g of water at that temperature?
- 40 g
- 100 g
- 160 g
- 16 g
Show answer
Answer: B. 250 g of water is 2.5 times 100 g, so it can hold 2.5 × 40 = 100 g of the salt.
-
5. A hot saturated solution of potassium nitrate is left to cool. What will be seen?
- Nothing changes
- The solution boils
- Crystals of potassium nitrate appear
- The solution turns into a suspension of oil
Show answer
Answer: C. Solubility of most solids falls as the temperature falls. The cooler solution cannot hold all the dissolved solute, so the extra comes out as crystals.
Sign in to keep track of the lessons you finish.