- Practice
- About 15 min
- 5 practice questions
Acceleration: rate of change of velocity
Calculate acceleration from a change in velocity, use positive and negative signs correctly, and tell uniform acceleration from non-uniform acceleration.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define acceleration and state its SI unit.
- Calculate acceleration with a = (v − u)/t, converting units first.
- Explain what a negative acceleration (retardation) means.
- Give examples of uniform and non-uniform acceleration.
In uniform motion along a straight line the velocity stays the same. In non-uniform motion it keeps changing: a bus pulling away from a stop gains velocity, and a bus braking at a red light loses it. How quickly the velocity changes matters a great deal; a car that reaches 60 km/h in 5 s feels very different from one that takes a minute. The PSEB textbook (prepared by NCERT) describes this with a new quantity, acceleration.
What acceleration means
Acceleration is the change in velocity of an object per unit time: acceleration = change in velocity ÷ time taken. If the velocity changes from an initial value u to a final value v in time t, then a = (v − u)/t. Motion in which the velocity changes is called accelerated motion.
a = (v − u)/t. Unit: metre per second per second, m/s² (also written m s⁻²).
The unit follows from the formula: velocity in m/s divided by time in s gives m/s². An acceleration of 2 m/s² means the velocity grows by 2 m/s in every second.
The sign of acceleration
Acceleration is taken as positive when it is in the direction of the velocity, so the object speeds up. It is negative when it is opposite to the velocity, so the object slows down. A negative acceleration is often called retardation or deceleration. A ball rolling to a stop on the ground and a train braking at a station both have negative acceleration.
Uniform and non-uniform acceleration
If an object moving in a straight line changes its velocity by equal amounts in equal intervals of time, its acceleration is uniform. A body falling freely is the standard example. If the velocity changes by unequal amounts in equal intervals, the acceleration is non-uniform, as with a car moving through traffic that speeds up by different amounts each second.
| Time (s) | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| Object X: velocity (m/s) | 0 | 3 | 6 | 9 | 12 |
| Object Y: velocity (m/s) | 0 | 1 | 5 | 6 | 10 |
X gains 3 m/s every second, so it has a uniform acceleration of 3 m/s². Y gains 1, 4, 1 and 4 m/s in successive seconds, so its acceleration is non-uniform.
Kinds of motion along a straight line
-
Uniform motion
Velocity constant
- Acceleration is zero
- Equal distances in equal times
-
Accelerated motion
Velocity changes
- Uniform acceleration: equal velocity change each second
- Non-uniform acceleration: unequal changes
- Positive: speeding up
- Negative: slowing down
Worked example 1: an auto-rickshaw starts
Question: An auto-rickshaw starts from rest and reaches 12 m/s in 8 s. Find its acceleration. Working: u = 0 (it starts from rest), v = 12 m/s, t = 8 s. a = (v − u)/t = (12 − 0)/8 = 1.5 m/s², positive, in the direction of motion.
Worked example 2: a car slows down
Question: A car slows from 54 km/h to 18 km/h in 4 s. Find its acceleration. Working: Change units first: u = 54 × 5/18 = 15 m/s and v = 18 × 5/18 = 5 m/s. a = (5 − 15)/4 = −10/4 = −2.5 m/s². The minus sign shows the acceleration is opposite to the motion: the car is retarding.
Worked example 3: finding the final velocity
Question: A train moving at 10 m/s accelerates uniformly at 0.5 m/s² for 20 s. What is its velocity at the end? Working: From a = (v − u)/t we get v = u + at = 10 + 0.5 × 20 = 10 + 10 = 20 m/s. Check: (20 − 10)/20 = 0.5 m/s². Correct.
Worked example 4: a train leaving a station
Question: A train starts from rest and reaches 36 km/h in 50 s with uniform acceleration. Find the acceleration. Working: v = 36 × 5/18 = 10 m/s, u = 0, t = 50 s. a = (10 − 0)/50 = 0.2 m/s². Always put every quantity in SI units before dividing; mixing km/h with seconds gives a wrong answer.
Common mistakes
- Writing (u − v) instead of (v − u): the final velocity always comes first.
- Forgetting to convert km/h to m/s or minutes to seconds.
- Dropping the minus sign for a slowing object; the sign carries meaning.
Key takeaways
- Acceleration is change in velocity per unit time: a = (v − u)/t, unit m/s².
- Positive acceleration is along the velocity (speeding up); negative is against it (slowing down).
- Equal velocity changes in equal times mean uniform acceleration; free fall is the classic case.
Check your understanding
-
1. A bicycle goes from rest to 5 m/s in 10 s. What is its acceleration?
- 50 m/s²
- 2 m/s²
- 0.5 m/s²
- 5 m/s²
Show answer
Answer: C. a = (v − u)/t = (5 − 0)/10 = 0.5 m/s².
-
2. A bus slows down from 20 m/s to 8 m/s in 6 s. Its acceleration is
- −2 m/s²
- 2 m/s²
- −4.7 m/s²
- −12 m/s²
Show answer
Answer: A. a = (8 − 20)/6 = −12/6 = −2 m/s². The negative sign means the acceleration is opposite to the direction of motion.
-
3. Which of these is the best example of uniform acceleration according to the textbook?
- A car moving through a crowded market
- A person jogging in a park
- A fan rotating at a steady rate
- An object falling freely towards the earth
Show answer
Answer: D. The textbook gives the motion of a freely falling body as the example of uniformly accelerated motion: its velocity grows by the same amount every second. Traffic and jogging involve unequal changes.
-
4. A scooter moving at 8 m/s accelerates uniformly at 1.5 m/s² for 4 s. What is its final velocity?
- 6 m/s
- 14 m/s
- 12 m/s
- 9.5 m/s
Show answer
Answer: B. v = u + at = 8 + 1.5 × 4 = 8 + 6 = 14 m/s.
-
5. A car reaches 72 km/h from rest in 25 s. What is its acceleration?
- 2.88 m/s²
- 0.8 m/s²
- 8 m/s²
- 1.25 m/s²
Show answer
Answer: B. Convert first: 72 km/h = 72 × 5/18 = 20 m/s. a = (20 − 0)/25 = 0.8 m/s². Using 72 directly would give the wrong value 2.88.
Sign in to keep track of the lessons you finish.