Revision notes

Chapter 7 Motion: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Describing motion: reference point, distance and displacement

Distance versus displacement

  • Distance How much ground was covered
    • Total length of the path
    • Magnitude only
    • Never decreases during a journey
    • Cannot be zero once the object has moved
  • Displacement How far from the start you ended up
    • Straight line from start to finish
    • Magnitude and direction
    • Can decrease if the object turns back
    • Is zero when the object returns to the start

The magnitude of displacement is never more than the distance. The two are equal only when the object moves along a straight line without turning back.

Made-up data for two objects moving in a straight line
Time (s)02468
Object P: distance (m)06121824
Object Q: distance (m)03101424
  • Motion is a change of position with time, always judged from a reference point.
  • Distance is the path length (magnitude only); displacement is the shortest start-to-finish distance with direction.
  • Displacement can be zero even when distance is large, as on a round trip.
  • Equal distances in equal time intervals means uniform motion; otherwise the motion is non-uniform.
Read the full lesson

Lesson 2

Speed and velocity: average speed, units and average velocity

Average speed = total distance travelled ÷ total time taken. Add up all the distances and all the times first; never simply average the speeds.

Speed and velocity

  • Speed Distance per unit time
    • Magnitude only
    • Uses total distance
    • Average speed of a round trip is not zero
    • Unit m/s
  • Velocity Displacement per unit time
    • Magnitude and direction
    • Uses displacement
    • Average velocity of a round trip is zero
    • Unit m/s
  • Speed = distance ÷ time; average speed = total distance ÷ total time; SI unit m/s.
  • Multiply km/h by 5/18 to get m/s, and m/s by 18/5 to get km/h.
  • Velocity is speed in a definite direction; it changes when speed or direction changes.
  • Average velocity = displacement ÷ time; for a uniform change it is (u + v)/2.
Read the full lesson

Lesson 3

Acceleration: rate of change of velocity

a = (v − u)/t. Unit: metre per second per second, m/s² (also written m s⁻²).

Made-up velocity readings for two objects
Time (s)01234
Object X: velocity (m/s)036912
Object Y: velocity (m/s)015610

Kinds of motion along a straight line

  • Uniform motion Velocity constant
    • Acceleration is zero
    • Equal distances in equal times
  • Accelerated motion Velocity changes
    • Uniform acceleration: equal velocity change each second
    • Non-uniform acceleration: unequal changes
    • Positive: speeding up
    • Negative: slowing down
  • Acceleration is change in velocity per unit time: a = (v − u)/t, unit m/s².
  • Positive acceleration is along the velocity (speeding up); negative is against it (slowing down).
  • Equal velocity changes in equal times mean uniform acceleration; free fall is the classic case.
Read the full lesson

Lesson 4

Graphs of motion: distance-time and velocity-time graphs

Area under a velocity-time graph = distance travelled (magnitude of displacement). Slope of a velocity-time graph = acceleration.

Reading the shape of a graph
What the line looks likeDistance-time graph meansVelocity-time graph means
Parallel to time axisObject at restUniform velocity (no acceleration)
Straight line sloping upUniform speedUniform acceleration
Curve getting steeperSpeed increasingAcceleration increasing
Straight line sloping downNot possible for distanceUniform retardation (slowing down)

Drawing a motion graph

  1. Make a table Record time and distance (or velocity) readings
  2. Choose scales Time on the x-axis, distance or velocity on the y-axis
  3. Plot the points Mark each pair of readings
  4. Join the points Straight line or smooth curve
  5. Interpret Use the shape, slope and area
  • Time is always on the x-axis in these graphs.
  • Distance-time: straight line = uniform speed; curve = changing speed; flat line = rest. Slope = speed.
  • Velocity-time: flat line = uniform velocity; straight sloping line = uniform acceleration. Slope = acceleration; area = distance.
Read the full lesson

Lesson 5

Equations of motion and uniform circular motion

v = u + at; s = ut + ½at²; 2as = v² − u². They hold only when the acceleration is uniform.

Solving a problem with the equations of motion

  1. List the data Write u, v, a, s, t that are given
  2. Convert units km/h to m/s, minutes to seconds
  3. Pick the equation The one with the unknown and no missing quantity
  4. Substitute and solve Keep units and signs
  5. Check Use a second equation to confirm
  • For uniform acceleration: v = u + at, s = ut + ½at², 2as = v² − u².
  • Convert to SI units and keep the sign of a (negative for braking).
  • Uniform circular motion has constant speed but changing direction, so it is accelerated; v = 2πr/t.
  • A body released from circular motion moves along the tangent.
Read the full lesson

Privacy · Terms · Refunds · Delivery