- Practice
- About 18 min
- 5 practice questions
Thrust and pressure, buoyancy and Archimedes' principle
Calculate pressure as thrust per area, explain pressure in fluids and buoyancy, predict floating and sinking from density, and use Archimedes' principle.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define thrust and pressure and calculate pressure in pascals.
- Explain why sharp tools cut well and wide bases spread loads.
- Explain buoyancy and why some objects float and others sink, using density.
- State Archimedes' principle and use it to find a buoyant force.
Why does a camel walk easily on sand, why do trucks have wide tyres and why does a knife need a sharp edge? Why does a huge steel ship float while a small iron nail sinks? The last part of the gravitation chapter in the PSEB textbook (prepared by NCERT) answers such questions with four ideas: thrust, pressure, buoyancy and Archimedes' principle.
Thrust and pressure
The force acting on an object perpendicular to its surface is called thrust. When you stand on loose sand, your weight is a thrust on the sand over the area of your feet. When you lie down, the same thrust is spread over the much larger area of your body, and you sink in less. The same thrust has different effects on different areas, so we define pressure as the thrust on unit area.
Pressure = thrust ÷ area. SI unit: N/m², called the pascal (Pa), in honour of Blaise Pascal.
Worked example 1: one box, two faces
Question: A 6 kg box measures 30 cm × 20 cm × 10 cm. Find the pressure it exerts on the floor when it rests (a) on its 30 cm × 20 cm face and (b) on its 20 cm × 10 cm face. (g = 9.8 m/s².) Working: Thrust = weight = 6 × 9.8 = 58.8 N in both cases. (a) Area = 0.30 m × 0.20 m = 0.06 m²; pressure = 58.8/0.06 = 980 Pa. (b) Area = 0.20 m × 0.10 m = 0.02 m²; pressure = 58.8/0.02 = 2940 Pa. The smaller face gives three times the pressure, because its area is one-third.
Worked example 2: standing and lying
Question: A 50 kg girl stands on sand; her two feet together touch 0.035 m². Lying down, she touches about 0.5 m². Compare the pressures. Working: Thrust = 50 × 9.8 = 490 N. Standing: 490/0.035 = 14 000 Pa. Lying: 490/0.5 = 980 Pa. Lying down, she exerts about one-fourteenth of the pressure.
This is why a nail has a pointed tip and a knife a sharp edge (small area, large pressure), while buildings have wide foundations, trucks wide tyres and army tanks a continuous chain (large area, small pressure).
Pressure in fluids
All liquids and gases are fluids. Like solids, fluids have weight, so they exert pressure on the base and the walls of their container. The textbook also notes that pressure exerted on any confined mass of fluid is transmitted undiminished in all directions.
Buoyancy
Push an empty, stoppered plastic bottle into a bucket of water. You feel an upward push that grows as more of the bottle goes under, until it is fully immersed; let go and the bottle bounces up. Gravity still pulls the bottle down, but the water pushes it up with a larger force. This upward force exerted by a fluid is called upthrust or buoyant force. All objects immersed in a fluid experience it, and its size depends on the density of the fluid.
Why objects float or sink
Put an iron nail and a cork of equal mass on water: the nail sinks and the cork floats. Both feel gravity and upthrust; the difference lies in their density, the mass per unit volume (density = mass ÷ volume). The cork is less dense than water, so the upthrust on it can exceed its weight and it floats. Iron is denser than water, so the upthrust on the nail is less than its weight and it sinks.
Float or sink?
-
Floats
Density of object less than that of the liquid
- Upthrust can balance the weight
- Cork, wood, ice on water
-
Sinks
Density of object greater than that of the liquid
- Upthrust is less than the weight
- Iron nail, stone in water
Worked example 3: will it float?
Question: A 60 g piece of a material has a volume of 75 cm³. Will it float in water (density 1 g/cm³)? Working: Density = 60 g ÷ 75 cm³ = 0.8 g/cm³, less than 1 g/cm³, so it floats. A 60 g piece with a volume of 40 cm³ would have density 1.5 g/cm³ and would sink.
Archimedes' principle
Hang a stone from a spring balance and lower it into water: the reading falls as more of the stone goes in, then stays the same once it is fully immersed. The upward buoyant force reduces the net pull on the balance. Its size is given by Archimedes' principle: when a body is immersed fully or partially in a fluid, it experiences an upward force equal to the weight of the fluid displaced by it. The reading stops falling once the stone is fully under water because it cannot displace any more water. The story goes that Archimedes, a Greek scientist, noticed water overflowing as he stepped into a bath and ran out shouting 'Eureka!' ('I have got it').
Archimedes' principle: buoyant force = weight of the fluid displaced by the immersed part of the body.
Worked example 4: buoyant force on a block
Question: A metal block of volume 500 cm³ weighs 12 N in air. Find the buoyant force on it when fully immersed in water, and the spring balance reading then. (Density of water 1 g/cm³, g = 9.8 m/s².) Working: Water displaced = 500 cm³, with mass 500 g = 0.5 kg, so its weight = 0.5 × 9.8 = 4.9 N. Buoyant force = 4.9 N. Balance reading = 12 − 4.9 = 7.1 N.
Archimedes' principle is used in designing ships and submarines. Lactometers, which check the purity of milk, and hydrometers, which measure the density of liquids, also work on it.
Key takeaways
- Thrust is a force perpendicular to a surface; pressure = thrust/area, in pascals.
- Fluids exert pressure on the base and walls of their container, and push up on immersed bodies (buoyancy).
- Less dense than the liquid: floats; denser: sinks.
- Archimedes' principle: upthrust = weight of fluid displaced.
Check your understanding
-
1. A force of 300 N acts perpendicular to an area of 1.5 m². What is the pressure?
- 450 Pa
- 200 Pa
- 0.005 Pa
- 301.5 Pa
Show answer
Answer: B. Pressure = thrust ÷ area = 300 ÷ 1.5 = 200 Pa.
-
2. Why is a school bag with wide straps more comfortable than one with thin string straps?
- Wide straps reduce the weight of the bag
- Wide straps increase the pressure on the shoulders
- Wide straps spread the same force over a larger area, reducing pressure
- Thin straps increase the mass of the bag
Show answer
Answer: C. The weight of the bag is the same. Wide straps spread it over a larger area of the shoulder, so pressure = force ÷ area is smaller and the bag hurts less.
-
3. A 40 g object has a volume of 50 cm³. In water of density 1 g/cm³ it will
- float, because its density is 0.8 g/cm³
- sink, because its density is 1.25 g/cm³
- sink, because it has mass
- float, because its density is 1.25 g/cm³
Show answer
Answer: A. Density = 40 g ÷ 50 cm³ = 0.8 g/cm³. This is less than water's 1 g/cm³, so it floats.
-
4. In which direction does the buoyant force on an object immersed in a liquid act?
- Downward
- Sideways
- Along the surface of the liquid
- Upward
Show answer
Answer: D. The buoyant force (upthrust) always acts upwards, opposite to the object's weight.
-
5. A stone weighs 5 N in air and 3 N when fully immersed in water. What is the weight of the water it displaces?
- 8 N
- 2 N
- 3 N
- 5 N
Show answer
Answer: B. Loss in weight = buoyant force = 5 − 3 = 2 N. By Archimedes' principle the buoyant force equals the weight of water displaced, so the displaced water weighs 2 N.
Sign in to keep track of the lessons you finish.