- Practice
- About 15 min
- 5 practice questions
The Ravi and the Beas
Trace the Ravi and the Beas from their sources to where they leave Punjab, and name their tributaries, headworks and dams, including Ranjit Sagar, Pong and Harike.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the source and course of the Ravi.
- Name the Ujh and the Ravi headworks and dam.
- Describe the source and course of the Beas and the dams on it.
- Explain the importance of Harike.
Two of Punjab's three perennial rivers, the Ravi and the Beas, both begin in the mountains of Himachal Pradesh, close to the Rohtang Pass area. One ends up forming part of India's international border; the other ends inside Punjab, at Harike.
The Ravi
The Ravi rises in the Himalayas of Himachal Pradesh, in the Bara Bhangal area of Kangra district, from glacier fields on the southern side of the Himalaya. The textbook calls it the smallest of the five Punjab rivers and gives its total length as about 720 km. It flows through the Bara Bhangal and Chamba areas as a fast mountain stream, its bed strewn with boulders.
Entering Punjab, the Ravi reaches the Madhopur Headworks in Pathankot district. It then flows along Pathankot, Gurdaspur and Amritsar districts, forming part of the India-Pakistan border. It enters Pakistan upstream of Lahore (the textbook names the village Kakkar Manjh) and finally joins the Chenab in Pakistan.
Course of the Ravi
- Bara Bhangal, Kangra (Himachal Pradesh) Glacier-fed source
- Chamba area Fast, rocky mountain stream
- Ranjit Sagar (Thein) Dam and Madhopur Headworks Pathankot district
- Along the border Gurdaspur and Amritsar districts
- Pakistan Passes Lahore; joins the Chenab
Tributary, headworks and dam
- Ujh: the textbook's main tributary of the Ravi, the most important river of Kathua district in Jammu and Kashmir. It rises in the Middle Himalayan ranges.
- Headworks and works on the Ravi listed in the textbook: Dhana or Basantpur near Shahpur Kandi, Katar Dhar, the Madhopur Headworks, and the Madhopur-Beas Link (Kathua Feeder).
- Ranjit Sagar Dam (Thein Dam): a large dam on the Ravi. According to the textbook it was approved in 1981, completed in 2001 and produces 600 megawatts of electricity. Its reservoir is the Ranjit Sagar lake.
The Beas
The Beas rises at Beas Kund, near the Rohtang Pass in Himachal Pradesh (the textbook gives its height as 4,361 m). It flows south through the Kullu valley and Mandi district, cuts through the Dhauladhar range near Larji, and comes out onto the plains at Talwara, on the Hoshiarpur side. Two dams hold back its water: the Pandoh Dam in Himachal Pradesh and the Pong Dam, near Talwara, whose reservoir lies in Himachal Pradesh.
In Punjab the textbook says the Beas flows about 100 km and then meets the Satluj at Harike, on the border of Tarn Taran and Ferozepur districts. From Harike the Rajasthan Feeder (which carries water into the Indira Gandhi Canal) takes water to Rajasthan for irrigation and drinking.
| River | Source | Ends | Works named in the textbook |
|---|---|---|---|
| Ravi | Bara Bhangal, Kangra, Himachal Pradesh | Joins the Chenab in Pakistan | Ranjit Sagar (Thein) Dam, Madhopur Headworks |
| Beas | Beas Kund near Rohtang Pass, Himachal Pradesh | Joins the Satluj at Harike, Punjab | Pandoh Dam, Pong Dam, Harike |
Tributaries of the Beas
The textbook lists the Parbati, Uhl, Sohan and Kali Bein among the Beas's tributaries. The Kali Bein is a slow stream of the plains: it flows through Hoshiarpur and Kapurthala districts and joins the Beas near Harike.
Worked example 1: one river or the other?
'This river leaves the hills at Talwara and is dammed at Pong.' Talwara and Pong are on the Beas. 'This river runs along the international border near Gurdaspur and is dammed at Thein.' That is the Ravi.
Worked example 2: why Harike matters
At Harike two perennial rivers meet: the Beas brings snowmelt from Kullu, the Satluj from Tibet. A barrage here can divert their combined flow into large canals such as the Rajasthan Feeder. So Harike is both a river confluence and a key point for irrigation far beyond Punjab.
Ravi: Kangra - Thein Dam - Madhopur - border - Chenab. Beas: Beas Kund - Kullu - Pong (Talwara) - Harike with the Satluj.
Key takeaways: The Ravi rises in Kangra, is dammed at Ranjit Sagar (Thein), feeds the Madhopur Headworks, forms part of the border and joins the Chenab in Pakistan. The Beas rises at Beas Kund near Rohtang, passes Kullu and Mandi, is dammed at Pandoh and Pong, and joins the Satluj at Harike, from where water goes to Rajasthan.
Check your understanding
-
1. On which river is the Ranjit Sagar (Thein) Dam built?
- Beas
- Satluj
- Ravi
- Ghaggar
Show answer
Answer: C. The Ranjit Sagar or Thein Dam is on the Ravi.
-
2. On which river is the Pong Dam built?
- Beas
- Ravi
- Satluj
- Chenab
Show answer
Answer: A. The Pong Dam is on the Beas near Talwara.
-
3. Where does the Beas rise?
- Rakas Tal in Tibet
- Gangotri glacier
- Verinag spring
- Beas Kund near Rohtang Pass
Show answer
Answer: D. The Beas rises at Beas Kund near the Rohtang Pass in Himachal Pradesh.
-
4. Which river joins the Beas near Harike after flowing through Hoshiarpur and Kapurthala districts?
- Kali Bein
- Ghaggar
- Sukhna Choe
- Ujh
Show answer
Answer: A. The textbook says the Kali Bein flows through Hoshiarpur and Kapurthala and meets the Beas near Harike.
-
5. Which statement about the Ravi is correct?
- It rises in Tibet
- It forms part of the India-Pakistan border and joins the Chenab in Pakistan
- It joins the Satluj at Harike
- It is a seasonal river
Show answer
Answer: B. The Ravi flows along part of the border in Gurdaspur and Amritsar and joins the Chenab in Pakistan. It is perennial and rises in Himachal Pradesh.
Sign in to keep track of the lessons you finish.