- Practice
- About 13 min
- 5 practice questions
Parallel lines with a bend: the helper-line method
Solve 'bent line' problems between two parallel lines by drawing a helper line through the bend, and combine them with algebra.
If something looks wrong, please tell us.
One of the most frequent figure questions shows two parallel lines with a path that bends between them. The angle at the bend is asked, and the usual facts about corresponding, alternate and co-interior angles do not seem to apply directly. The trick is to draw one extra line, a helper line through the bend parallel to the two given lines. After that every step is an alternate-angle fact.
The helper-line method
- Mark the bend point P, and draw a line through P parallel to the two given lines.
- The helper line splits the angle at P into two parts.
- Each part is an alternate angle (equal) to the angle between an arm and its parallel line.
- So the angle at the bend is the sum of those two angles.
In words: if AB is parallel to CD, with A and C on the same side, and a path A-P-C bends at P between the two lines, then angle APC = angle BAP + angle DCP. The two angles on the right are the ones the arms make with the parallel lines, measured towards the side of the bend.
Worked example 1
Question: AB is parallel to CD, angle BAP = 48 degrees and angle DCP = 37 degrees. Find angle APC. Working: Draw a line through P parallel to AB. The upper part of angle APC is equal to 48 degrees (alternate to angle BAP) and the lower part is equal to 37 degrees (alternate to angle DCP). Sum = 48 + 37 = 85. Answer: 85 degrees.
Worked example 2: going backwards
Question: In the same figure angle APC = 110 degrees and angle BAP = 40 degrees. Find angle DCP. Working: The two parts must sum to 110, so angle DCP = 110 - 40 = 70. Answer: 70 degrees.
The other side of the bend
The angle on the other side of P (the reflex angle) is 360 minus the angle APC, because the angles around a point add up to 360 degrees. If angle BAP = 60 and angle DCP = 45, then angle APC = 105 and the reflex angle at P is 360 - 105 = 255 degrees.
Worked example 3: with algebra
Question: AB is parallel to CD. Angle APC = (5x + 5) degrees, angle BAP = (3x - 10) degrees and angle DCP = (x + 25) degrees. Find angle APC. Working: APC = BAP + DCP, so 5x + 5 = (3x - 10) + (x + 25) = 4x + 15. Then x = 10. Angle APC = 5 × 10 + 5 = 55 degrees. Check: 3 × 10 - 10 = 20, 10 + 25 = 35 and 20 + 35 = 55. Answer: 55 degrees.
Traps and checks
- Do not use the co-interior rule (sum 180) unless the angles are on the same side of a transversal between the lines.
- Check that the answer is sensible: the bend angle is larger than either part.
- When two bends are drawn, add a helper line at each; the total of the angles pointing one way equals the total pointing the other way.
A bend between parallels: draw the helper line, then add the two alternate angles.
Key takeaways
- Bend angle = sum of the two angles made with the parallel lines.
- Reflex angle = 360 minus the bend angle.
- Equate and solve when the angles are given as expressions in x.
Check your understanding
-
1. AB is parallel to CD. Angle BAP = 48 degrees and angle DCP = 37 degrees for a bend at P between the lines. What is angle APC?
- 11 degrees
- 95 degrees
- 85 degrees
- 132 degrees
Show answer
Answer: C. Angle APC = 48 + 37 = 85 degrees, by the helper-line method.
-
2. AB is parallel to CD and angle APC = 110 degrees at the bend P. If angle BAP = 40 degrees, what is angle DCP?
- 70 degrees
- 30 degrees
- 140 degrees
- 150 degrees
Show answer
Answer: A. Angle DCP = 110 - 40 = 70 degrees.
-
3. With AB parallel to CD, angle BAP = 60 degrees and angle DCP = 45 degrees. What is the reflex angle at P on the other side of the bend?
- 105 degrees
- 75 degrees
- 285 degrees
- 255 degrees
Show answer
Answer: D. Angle APC = 60 + 45 = 105 degrees. The reflex angle = 360 - 105 = 255 degrees.
-
4. AB is parallel to CD. Angle APC = (5x + 5), angle BAP = (3x - 10) and angle DCP = (x + 25), all in degrees. What is angle APC?
- 10 degrees
- 55 degrees
- 35 degrees
- 20 degrees
Show answer
Answer: B. 5x + 5 = 4x + 15 gives x = 10. Angle APC = 55 degrees (20 + 35).
-
5. A transversal cuts two parallel lines and two co-interior angles are (2z + 20) degrees and (3z - 10) degrees. What is the smaller of the two angles?
- 92 degrees
- 88 degrees
- 34 degrees
- 90 degrees
Show answer
Answer: B. Co-interior angles add up to 180: 5z + 10 = 180, so z = 34. The angles are 88 and 92 degrees, and the smaller is 88.
Sign in to keep track of the lessons you finish.