Revision notes

Pipes and Cisterns: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Pipes, cisterns and the idea of a filling rate

Turning a time into an hourly rate
Time to fill the tankPart filled in 1 hourPart filled in 2 hours
2 hours1/21 (full)
4 hours1/41/2
5 hours1/52/5
8 hours1/81/4
12 hours1/121/6

Part filled and time left

  1. Rate Fills in 8 hours, so 1/8 each hour.
  2. Filled in 3 hours 3 × 1/8 = 3/8.
  3. Part left 1 − 3/8 = 5/8.
  4. Time for the rest (5/8) ÷ (1/8) = 5 hours.

Inlet and outlet at a steady rate

  • Inlet pipe
    • Brings water in and fills the tank
    • Fills the tank in n hours: adds 1/n each hour
    • Fills in 8 hours: 3/8 full after 3 hours
  • Outlet pipe or leak
    • Takes water out and empties the tank
    • Empties the tank in n hours: removes 1/n each hour
    • Empties in 10 hours: 2/5 gone after 4 hours

A pipe that fills a tank in n hours fills 1/n of it every hour. Time needed = part to be filled ÷ part filled per hour.

  • Treat the full tank as 1. A pipe that takes n hours does 1/n per hour.
  • An outlet or a leak removes water at its own steady rate, 1/n per hour if it empties the full tank in n hours.
  • Work out the part that still needs filling or emptying before you divide.
  • Keep the time unit the same (all hours or all minutes) in one question.
Read the full lesson

Lesson 2

Two or more inlet pipes working together

Pipes A (6 hours) and B (12 hours) together

  1. Time to rate A fills 1/6 and B 1/12 each hour.
  2. Add the rates 1/6 + 1/12 = 3/12 = 1/4 per hour.
  3. Rate to time Together they take 4 hours.

Add the rates, not the times

  • Right: add the rates
    • 1/6 + 1/12 = 1/4
    • Together: 4 hours
    • Less than the faster pipe's 6 hours
  • Wrong: use the times
    • Average of 6 and 12: 9 hours
    • Sum of 6 and 12: 18 hours
    • Neither is faster than pipe A alone

Together rate = sum of the separate rates. For two pipes, T = ab ÷ (a + b). The combined time is always less than the quickest pipe's time.

  • Convert each time to a rate (1/a, 1/b, ...), add the rates, then turn the total back into a time.
  • Product over sum is a shortcut for exactly two pipes.
  • n identical pipes take 1/n of the time of one pipe.
  • Never average or add the times of pipes working together.
Read the full lesson

Lesson 3

The LCM method: treating the tank as a number of units

The LCM method on pipes A and B

  1. Capacity = LCM LCM of 10 and 15 = 30 units.
  2. Units per hour A: 30 ÷ 10 = 3. B: 30 ÷ 15 = 2.
  3. Add the open pipes 3 + 2 = 5 units per hour.
  4. Time 30 ÷ 5 = 6 hours.
LCM of 12, 15 and 20 is 60
PipeTime aloneUnits per hour (capacity 60)
A12 hours60 ÷ 12 = 5
B15 hours60 ÷ 15 = 4
C20 hours60 ÷ 20 = 3
All three?5 + 4 + 3 = 12

Capacity = LCM of the times. Units per hour = capacity ÷ time. Time = units to be filled ÷ units per hour.

Pick the LCM as the capacity, turn every time into whole-number units per hour, combine them and divide. When pipes run for the same time, they share the work in the ratio of their rates. The method gives exactly the same answers as fractions, only faster.

Read the full lesson

Lesson 4

Inlet and outlet pipes open together

Which pipe wins?

  • Inlet faster Net rate positive: the tank fills, more slowly than with the inlet alone.
  • Outlet faster Net rate negative: a full tank empties, more slowly than with the outlet alone.
  • Equal times Net rate zero: the level stays where it is.
SituationNet rateWhat happens
Inlet faster than outletPositiveTank fills, but more slowly than with the inlet alone
Outlet faster than inletNegativeA full tank empties, more slowly than with the outlet alone
Equal timesZeroLevel stays where it is

Two inlets and one outlet

  1. Capacity LCM(10, 12, 20) = 60 units.
  2. Signed rates A +6, B +5, C −3 units per hour.
  3. Net rate 6 + 5 − 3 = 8 units per hour.
  4. Time 60 ÷ 8 = 7.5 hours.

Net rate = (sum of inlet rates) − (sum of outlet rates). Positive: the tank fills. Negative: it empties. One inlet (a hours) and one outlet (b hours, b > a): the tank fills in ab ÷ (b − a) hours.

  • Give inlets a plus sign and outlets a minus sign, then add.
  • With an outlet open, filling always takes longer than with the inlets alone.
  • Check the sign of the net rate before you answer: the tank may be emptying, not filling.
  • Equal inlet and outlet rates leave the level unchanged.
Read the full lesson

Lesson 5

Leaks: the hidden outlet

Finding the leak's own time

  1. Pipe alone Fills in 6 hours: 1/6 per hour.
  2. With the leak Takes 8 hours: 1/8 per hour.
  3. Leak's rate 1/6 − 1/8 = 1/24 per hour.
  4. Leak alone Empties the full tank in 24 hours.

A leak in litres

  1. In and out Tap +15 litres a minute, leak −3 litres a minute.
  2. Net flow 15 − 3 = 12 litres a minute.
  3. Time to fill 600 ÷ 12 = 50 minutes.

Leak rate = normal filling rate − rate with the leak. If a pipe fills in a hours normally and b hours with a leak, the leak alone empties the full tank in ab ÷ (b − a) hours.

  • A leak is an outlet: subtract its rate.
  • Two times for the same pipe (without and with leak) give the leak's rate by subtraction.
  • Convert 'takes x hours longer' into the new total time before using any formula.
  • In litre questions, subtract litres per minute to get the net flow.
Read the full lesson

Privacy · Terms · Refunds · Delivery