• Foundation
  • About 12 min
  • 5 practice questions

Pipes, cisterns and the idea of a filling rate

Understand what inlet and outlet pipes do, and turn a statement like 'fills in 6 hours' into a rate of 1/6 of the tank per hour.

If something looks wrong, please tell us.

Pipes and cisterns is one of the friendliest chapters of quantitative aptitude, because it uses a single idea again and again. A cistern (a water tank) is the job to be done, and each pipe is a worker that either fills it or empties it. If you have studied time and work, you already know most of the method. If you have not, this lesson starts from zero. Questions on this topic appear regularly in competitive exams, and almost all of them become easy once you stop thinking in hours and start thinking in 'part of the tank per hour'.

Words you will meet

  • Cistern or tank: the container being filled or emptied. We usually treat a full tank as 1 whole.
  • Inlet pipe: a pipe that brings water in and fills the tank.
  • Outlet pipe: a pipe that takes water out and empties the tank.
  • Leak: a hole or crack that lets water escape. It behaves exactly like an outlet pipe, only nobody planned it.
  • Capacity: how much the tank holds when full, for example 600 litres.

From time to rate

Every question assumes that a pipe flows at a steady rate: it adds the same amount of water every hour. So if a pipe fills a tank in 6 hours, it must fill exactly one-sixth of the tank in each hour. After 1 hour the tank is 1/6 full, after 2 hours 2/6 = 1/3 full, and after 6 hours 6/6 = full. In general, a pipe that fills a tank in n hours fills 1/n of the tank every hour. This works backwards too: a pipe that fills 1/n of a tank per hour needs n hours for the whole tank.

Turning a time into an hourly rate
Time to fill the tankPart filled in 1 hourPart filled in 2 hours
2 hours1/21 (full)
4 hours1/41/2
5 hours1/52/5
8 hours1/81/4
12 hours1/121/6

The same idea works in minutes. A tap that fills a bucket in 20 minutes fills 1/20 of the bucket every minute. Just keep one unit throughout a question: do not mix hours and minutes in the same calculation.

Worked example 1: part filled and time left

A pipe fills a tank in 8 hours. What part is filled in 3 hours, and how much longer is needed to fill the rest? Working: in 1 hour the pipe fills 1/8, so in 3 hours it fills 3 × 1/8 = 3/8. The part still empty is 1 − 3/8 = 5/8. Time for the rest = part left ÷ part per hour = (5/8) ÷ (1/8) = 5 hours. Check: 3 hours + 5 hours = 8 hours, the full time. Correct.

Part filled and time left

  1. Rate Fills in 8 hours, so 1/8 each hour.
  2. Filled in 3 hours 3 × 1/8 = 3/8.
  3. Part left 1 − 3/8 = 5/8.
  4. Time for the rest (5/8) ÷ (1/8) = 5 hours.

Worked example 2: an outlet pipe

An outlet pipe can empty a full tank in 10 hours. The tank is full and the outlet is opened. What part of the tank is still full of water after 4 hours? Working: the outlet removes 1/10 of the tank each hour, so in 4 hours it removes 4/10 = 2/5. Water left = 1 − 2/5 = 3/5 of the tank. To empty the remaining 3/5 it needs (3/5) ÷ (1/10) = 6 more hours.

Inlet and outlet at a steady rate

  • Inlet pipe
    • Brings water in and fills the tank
    • Fills the tank in n hours: adds 1/n each hour
    • Fills in 8 hours: 3/8 full after 3 hours
  • Outlet pipe or leak
    • Takes water out and empties the tank
    • Empties the tank in n hours: removes 1/n each hour
    • Empties in 10 hours: 2/5 gone after 4 hours

Worked example 3: a tank that is already partly full

A pipe fills an empty tank in 12 hours. The tank is already half full. How long will the pipe take to fill it? Working: only 1/2 of the tank needs water, and the pipe fills 1/12 per hour, so time = (1/2) ÷ (1/12) = 6 hours. Many students answer 12 hours here because they forget the water already in the tank. Always ask: how much of the tank still needs filling?

A pipe that fills a tank in n hours fills 1/n of it every hour. Time needed = part to be filled ÷ part filled per hour.

Key takeaways

  • Treat the full tank as 1. A pipe that takes n hours does 1/n per hour.
  • An outlet or a leak removes water at its own steady rate, 1/n per hour if it empties the full tank in n hours.
  • Work out the part that still needs filling or emptying before you divide.
  • Keep the time unit the same (all hours or all minutes) in one question.

Check your understanding

  1. 1. A pipe can fill an empty tank in 9 hours. What part of the tank does it fill in one hour?

    1. 1/3
    2. 1/9
    3. 9
    4. 1/18
    Show answer

    Answer: B. The pipe fills the whole tank in 9 hours at a steady rate, so it fills 1/9 of the tank in each hour.

  2. 2. A pipe fills a tank in 15 hours. What part of the empty tank is filled in 5 hours?

    1. 1/5
    2. 2/3
    3. 1/15
    4. 1/3
    Show answer

    Answer: D. Part per hour = 1/15. In 5 hours: 5 × 1/15 = 5/15 = 1/3 of the tank.

  3. 3. A tank is 2/5 full. A pipe that fills the whole tank in 10 hours is opened. How long will it take to fill the tank completely?

    1. 6 hours
    2. 4 hours
    3. 10 hours
    4. 5 hours
    Show answer

    Answer: A. Part still empty = 1 − 2/5 = 3/5. The pipe fills 1/10 per hour, so time = (3/5) ÷ (1/10) = 3/5 × 10 = 6 hours.

  4. 4. An outlet pipe empties a full tank in 16 hours. The tank is full and the outlet is opened. What part of the tank is still filled with water after 6 hours?

    1. 3/8
    2. 5/8
    3. 5/16
    4. 3/4
    Show answer

    Answer: B. The outlet removes 1/16 per hour, so in 6 hours it removes 6/16 = 3/8. Water left = 1 − 3/8 = 5/8 of the tank.

  5. 5. A pipe fills 3/4 of a tank in 9 hours. How long would it take to fill the whole empty tank?

    1. 6.75 hours
    2. 15 hours
    3. 12 hours
    4. 13.5 hours
    Show answer

    Answer: C. Part per hour = (3/4) ÷ 9 = 1/12. So the whole tank takes 12 hours. Quick check: 3/4 of 12 hours is 9 hours.

Privacy · Terms · Refunds · Delivery