- Foundation
- About 14 min
- 5 practice questions
How nanotechnology began: Feynman, Taniguchi and the microscopes that see atoms
Recall Feynman's 1959 talk, the 1974 coinage of 'nanotechnology', and how the scanning tunnelling and atomic force microscopes let scientists see and move single atoms.
If something looks wrong, please tell us.
Nanotechnology became possible when two things came together: the idea that we could build things atom by atom, and tools that could actually see atoms. This lesson tells that story in order. Exams often ask who said what and when, so keep the timeline in mind.
The idea: 'There's Plenty of Room at the Bottom'
In December 1959 the American physicist Richard Feynman gave a talk at the California Institute of Technology (Caltech) called "There's Plenty of Room at the Bottom". He argued that nothing in the laws of physics stopped us from writing, building and arranging things on the scale of atoms. As an example, he asked whether the whole of a large encyclopaedia could be written on the head of a pin. His talk did not use the word 'nanotechnology', but it is widely seen as the first clear statement of the idea.
The word: Norio Taniguchi, 1974
The term nanotechnology was first used in 1974 by the Japanese scientist Norio Taniguchi. He used it for machining and processing materials with precision at the scale of a nanometre.
The tools: seeing atoms
Ordinary light microscopes cannot show anything much smaller than a few hundred nanometres, because light waves are too long to pick out finer detail. Electron microscopes, which use beams of electrons instead of light, can see far smaller features. But the tools that opened the door to working with single atoms on a surface were the scanning probe microscopes.
| Tool | When | How it works | Key point |
|---|---|---|---|
| Scanning tunnelling microscope (STM) | 1981, by Gerd Binnig and Heinrich Rohrer at IBM in Zurich | A very sharp metal tip is held just above a surface; a tiny electric current 'tunnels' across the gap and changes sharply with distance | Shows individual atoms on conducting surfaces; its inventors shared the 1986 Nobel Prize in Physics |
| Atomic force microscope (AFM) | Developed a few years after the STM, in the mid-1980s | A sharp tip on a flexible cantilever is moved over the surface; the tiny forces bend the cantilever and the bending is measured | Works on non-conducting surfaces too, including biological samples |
These tools could also move atoms. In 1989 researchers at IBM used an STM to arrange 35 xenon atoms on a nickel surface to spell out the letters 'IBM' - a famous demonstration that single atoms could be placed where we wanted them.
Worked example 1: reading a timeline
Arrange these in order: the STM is invented; the word 'nanotechnology' is first used; Feynman's talk; atoms arranged to spell 'IBM'. Working: Feynman's talk is 1959; Taniguchi's term is 1974; the STM is 1981; the IBM letters are 1989. Order: talk → term → STM → IBM letters. Gap between the talk and the term: 1974 − 1959 = 15 years.
Worked example 2: choosing the right microscope
A researcher wants to image a protein lying on a glass slide, which does not conduct electricity. Which scanning probe tool should she use? Working: the STM needs an electric current to flow between the tip and the surface, so it needs a conducting sample. The AFM measures forces instead of current, so it works on insulators. Answer: the AFM.
1959 Feynman's talk (the idea) → 1974 Taniguchi's word → 1981 STM (seeing atoms) → mid-1980s AFM (also non-conductors) → 1989 atoms arranged to spell 'IBM'.
Key takeaways: Feynman's 1959 talk set out the idea; Taniguchi coined the term in 1974. The STM (1981) uses a tunnelling current and needs a conducting surface; the AFM measures force and works on almost any surface. Scanning probes can both see and move single atoms.
Check your understanding
-
1. Who gave the 1959 talk "There's Plenty of Room at the Bottom"?
- Norio Taniguchi
- Richard Feynman
- Gerd Binnig
- Heinrich Rohrer
Show answer
Answer: B. Richard Feynman gave the talk at Caltech in December 1959. Taniguchi coined the word in 1974, and Binnig and Rohrer invented the STM in 1981.
-
2. The term 'nanotechnology' was first used in 1974 by:
- Richard Feynman
- Gerd Binnig
- Norio Taniguchi
- Heinrich Rohrer
Show answer
Answer: C. The Japanese scientist Norio Taniguchi first used the word in 1974 for precision machining at the nanometre scale.
-
3. The scanning tunnelling microscope forms an image by measuring:
- The bending of a cantilever pushed by surface forces
- Light reflected from the sample
- A beam of sound waves passing through the sample
- A tiny electric current that tunnels between a sharp tip and the surface
Show answer
Answer: D. The STM depends on a tunnelling current across a very small gap. Measuring the bending of a cantilever is how the atomic force microscope works.
-
4. Why can the atomic force microscope image a non-conducting sample when the STM cannot?
- The AFM measures forces on a tip rather than an electric current
- The AFM uses a much brighter light source
- The AFM coats every sample with gold first
- The AFM works only in a vacuum
Show answer
Answer: A. The STM needs current to flow between tip and sample, so the sample must conduct. The AFM senses the tiny forces that bend its cantilever, which works on insulators too.
-
5. Which event came last in time?
- Feynman's 'Plenty of Room at the Bottom' talk
- Taniguchi's first use of the word 'nanotechnology'
- IBM researchers spelling 'IBM' with 35 xenon atoms
- The invention of the scanning tunnelling microscope
Show answer
Answer: C. The order is: Feynman's talk 1959, Taniguchi's term 1974, STM 1981, and the xenon-atom 'IBM' letters in 1989.
Sign in to keep track of the lessons you finish.