• Foundation
  • About 14 min
  • 5 practice questions

How rockets work: action and reaction, stages and propellants

Explain how a rocket moves using Newton's third law, why rockets have stages, and how solid, liquid and cryogenic propulsion differ.

If something looks wrong, please tell us.

Every satellite and space mission starts with a rocket. The basic science is simple enough to see with a balloon, yet the engineering is among the hardest in the world. Exam questions on rockets usually test the law behind them, the idea of staging and the differences between kinds of fuel.

Newton's third law

Newton's third law says that for every action there is an equal and opposite reaction. Blow up a balloon and let it go: air rushes out backwards and the balloon shoots forwards. A rocket works the same way. It burns propellant to make hot gas and throws that gas out of a nozzle at very high speed. The rocket pushes the gas backwards, and the gas pushes the rocket forwards. This forward push is called thrust.

A rocket does not need air to push against - it pushes against its own exhaust. That is why rockets work in the vacuum of space, where a jet engine or propeller would be useless.

Fuel and oxidiser

Burning needs oxygen. Aircraft engines take oxygen from the air, but there is no air in space, so a rocket must carry its own oxygen supply, called the oxidiser, as well as its fuel. Together they are the propellant.

Why rockets have stages

Most of a rocket's mass at lift-off is propellant. As it burns, large empty tanks and heavy engines are left behind that would only slow the rocket down. A multi-stage rocket solves this: each stage has its own engines and tanks, and when its propellant is used up it is dropped away. The next stage then has a much lighter load to push. Extra strap-on boosters are often attached to the sides to add thrust at lift-off.

Three kinds of propulsion

Solid, liquid and cryogenic stages compared
TypeWhat it usesStrengthsWeaknessesTypical use
SolidFuel and oxidiser mixed into a rubbery solid blockSimple, can be stored for long, gives very high thrustOnce lit it cannot be switched off or throttled; less efficientFirst stages and strap-on boosters
LiquidLiquid fuel and liquid oxidiser kept in separate tanks and pumped into the engineCan be throttled, switched off and in some engines restartedPumps, valves and plumbing make it more complexMiddle and upper stages, strap-ons
CryogenicLiquid hydrogen (stored at about −253 °C) burned with liquid oxygen (about −183 °C)Most efficient of the three: more push from each kilogram of propellantSuper-cold liquids are very hard to store and handleUpper stages that place heavy satellites in high orbits

'Cryogenic' means 'related to very low temperatures'. Hydrogen and oxygen are gases at normal temperatures; they must be cooled until they turn liquid so that enough of them fits into the tanks.

Worked example 1: will it lift off?

Suppose a rocket weighs 3,000 kN at lift-off and its engines give a thrust of 4,000 kN. Working: net upward force = thrust − weight = 4,000 − 3,000 = 1,000 kN, so the rocket rises. If the thrust were only 2,800 kN, the net force would be 2,800 − 3,000 = −200 kN, and the rocket would not leave the pad. Rule: at lift-off, thrust must be greater than weight. (Figures are illustrative.)

Worked example 2: the benefit of dropping a stage

Suppose after the first stage burns out, the rocket still weighs 1,000 tonnes, of which 400 tonnes is the empty first stage. Working: if the empty stage is dropped, the remaining rocket weighs 1,000 − 400 = 600 tonnes. The next engine now has to speed up only 600 tonnes instead of 1,000 tonnes - 40 per cent less mass - so the same push gives far more speed. (Figures are illustrative.)

Action and reaction: the rocket pushes gas backwards, the gas pushes the rocket forwards. Carry your own oxidiser. Drop empty stages. Solid = simple and powerful; liquid = controllable; cryogenic = most efficient.

Key takeaways: rockets obey Newton's third law and work best in vacuum. They carry both fuel and oxidiser. Staging throws away dead weight. Solid motors give big thrust at lift-off, liquid engines can be controlled, and cryogenic engines using liquid hydrogen and liquid oxygen give the most push per kilogram.

Check your understanding

  1. 1. A rocket moves forward because:

    1. Its exhaust pushes against the air behind it
    2. It pushes gas backwards and the gas pushes it forwards
    3. The Earth's gravity pulls it upwards
    4. Its wings create lift as it speeds up
    Show answer

    Answer: B. By Newton's third law, the rocket exerts a force on its exhaust gas, throwing it backwards, and the gas exerts an equal and opposite force on the rocket. It does not need air, which is why rockets work in space.

  2. 2. Why must a rocket carry an oxidiser as well as fuel?

    1. The oxidiser keeps the fuel from freezing
    2. The oxidiser makes the rocket heavier and more stable
    3. There is no air in space to supply oxygen for burning
    4. The oxidiser cools the nozzle
    Show answer

    Answer: C. Burning needs oxygen. Above the atmosphere there is no air to supply it, so the rocket carries its own oxidiser, such as liquid oxygen.

  3. 3. The main reason for building a rocket in stages is to:

    1. Throw away empty tanks and engines so the rest of the rocket is lighter
    2. Make the rocket easier to paint
    3. Allow the rocket to carry passengers
    4. Reduce the noise at lift-off
    Show answer

    Answer: A. Each stage drops away once its propellant is used, so later stages do not waste effort carrying dead weight. This lets the rocket reach much higher speeds.

  4. 4. A cryogenic rocket stage burns:

    1. Kerosene with nitric acid
    2. A solid rubbery mixture of fuel and oxidiser
    3. Compressed air with petrol
    4. Liquid hydrogen with liquid oxygen
    Show answer

    Answer: D. A cryogenic stage uses liquid hydrogen (about −253 °C) and liquid oxygen (about −183 °C). Solid motors use a rubbery block of propellant.

  5. 5. Which statement about solid rocket motors is correct?

    1. They can easily be switched off and restarted in flight
    2. Once lit, they usually cannot be switched off or throttled
    3. They are the most efficient type and are used only in upper stages
    4. They need liquid hydrogen to work
    Show answer

    Answer: B. A solid motor burns until its propellant is used up; it cannot normally be stopped or throttled. It is simple and gives high thrust, so it suits first stages and boosters. Cryogenic stages, not solids, are the most efficient.

Privacy · Terms · Refunds · Delivery