- Practice
- About 15 min
- 5 practice questions
Rockets and Indian launch vehicles: stages, propellants and roles for revision
Revise the propellant types and the stage-by-stage make-up of SLV-3, ASLV, PSLV, GSLV and LVM3, and answer matching and statement questions on them.
If something looks wrong, please tell us.
Launch-vehicle questions test two things: what kind of propulsion each stage uses and which rocket does which job. Once you can picture each rocket as a stack of stages, most questions answer themselves.
Propellants at a glance
| Type | Typical propellant | Key feature | Indian example |
|---|---|---|---|
| Solid | A rubbery block of fuel and oxidiser, such as one based on HTPB (a synthetic rubber) | High thrust, simple, cannot be throttled or stopped | PSLV first and third stages; S200 boosters of LVM3 |
| Earth-storable liquid | UDMH (fuel) with nitrogen tetroxide (oxidiser) | Hypergolic: the two ignite on contact, no igniter needed; can be stored at room temperature | Vikas engine (PSLV second stage, GSLV and LVM3 core) |
| Cryogenic | Liquid hydrogen with liquid oxygen | Most efficient; liquids must be kept extremely cold | GSLV upper stage; C25 stage of LVM3 |
India's launch vehicles stage by stage
| Vehicle | Stages | Role |
|---|---|---|
| SLV-3 | Four stages, all solid | First Indian rocket to reach orbit: Rohini, 1980 |
| ASLV | Five stages, all solid (SLV-3 core plus two strap-on boosters) | Tested strap-on technology and other features needed for bigger rockets; carried small satellites |
| PSLV | Four stages: solid, liquid, solid, liquid; versions with no strap-ons or with two, four or six solid strap-ons | Workhorse for polar sun-synchronous orbits; also launched Chandrayaan-1, Mangalyaan and Aditya-L1 |
| GSLV | Three stages: solid core with four liquid strap-ons, liquid second stage, cryogenic third stage | Communication and navigation satellites to geosynchronous transfer orbit |
| LVM3 | Two large solid boosters (S200), liquid core stage (L110), cryogenic upper stage (C25) | Heaviest Indian launcher, earlier called GSLV Mk III; launched Chandrayaan-2 and Chandrayaan-3 |
Early GSLV flights used cryogenic stages supplied by Russia. India later developed its own cryogenic stage, which made it self-reliant for launching heavier satellites towards geostationary orbit.
The traps
- 'Polar' in PSLV describes its design, not a limit. PSLV has also flown missions to the Moon, Mars and the L1 point.
- LVM3 and GSLV Mk III are the same rocket under two names.
- GSLV does not usually place a satellite directly in geostationary orbit. It leaves it in a transfer orbit; the satellite's own motor finishes the climb.
- SLV-3 and ASLV were all-solid; liquid stages arrived with PSLV.
- Hypergolic means self-igniting on contact - it does not mean cryogenic.
Worked example 1: identify the rocket
Clue: 'four stages that alternate between solid and liquid'. Working: SLV-3 is all solid, GSLV has three stages, LVM3 has two boosters plus two stages. Only PSLV fits: solid, liquid, solid, liquid. Answer: PSLV.
Worked example 2: a statement question
Consider: (1) LVM3 uses a cryogenic upper stage. (2) SLV-3 used a liquid second stage. (3) The Vikas engine burns liquid hydrogen. Which are correct? Working: (1) true - the C25 stage is cryogenic. (2) false - every SLV-3 stage was solid. (3) false - Vikas burns UDMH and nitrogen tetroxide, an Earth-storable pair; liquid hydrogen is used in the cryogenic stage. Answer: 1 only.
SLV-3 4 solid → ASLV 5 solid → PSLV S-L-S-L → GSLV solid core + liquid strap-ons, liquid, cryogenic → LVM3 S200 + L110 + C25. Vikas = storable liquid; C25 and GSLV upper stage = cryogenic.
Key takeaways: link each vehicle to its stack of stages and its job. Watch for traps on the PSLV name, the GSLV/LVM3 names, transfer orbits and the meaning of hypergolic.
Check your understanding
-
1. Which Indian launch vehicle has four stages that alternate solid, liquid, solid, liquid?
- SLV-3
- GSLV
- PSLV
- ASLV
Show answer
Answer: C. PSLV's stages are solid, liquid, solid, liquid. SLV-3 and ASLV were all solid, and GSLV has three stages ending in a cryogenic one.
-
2. LVM3 was earlier known as:
- GSLV Mk III
- PSLV-XL
- ASLV
- SLV-3
Show answer
Answer: A. LVM3 (Launch Vehicle Mark-3) is the same rocket that was called GSLV Mk III. PSLV-XL is a version of PSLV with six large strap-on boosters.
-
3. A pair of rocket propellants that ignite as soon as they touch each other is called:
- Cryogenic
- Monopropellant
- Solid
- Hypergolic
Show answer
Answer: D. Hypergolic propellants, such as UDMH with nitrogen tetroxide used in the Vikas engine, ignite on contact, so no igniter is needed. Cryogenic refers to very cold liquids such as liquid hydrogen.
-
4. Consider: (1) SLV-3 used only solid stages. (2) PSLV has been used only for polar orbits. (3) LVM3 launched Chandrayaan-3. Which are correct?
- 1, 2 and 3
- 1 and 3 only
- 2 and 3 only
- 1 only
Show answer
Answer: B. Statements 1 and 3 are correct. Statement 2 is wrong: PSLV has also launched Chandrayaan-1, the Mars Orbiter Mission and Aditya-L1.
-
5. Match the stage with its propulsion: S200, L110, C25 (all on LVM3).
- Liquid, solid, cryogenic
- Solid, liquid, cryogenic
- Cryogenic, liquid, solid
- Solid, cryogenic, liquid
Show answer
Answer: B. In ISRO's naming, S stands for solid, L for liquid and C for cryogenic, followed roughly by the propellant load in tonnes. So S200 is solid, L110 is liquid and C25 is cryogenic.
Sign in to keep track of the lessons you finish.