• Foundation
  • About 13 min
  • 5 practice questions

Breaking the syllabus into units and estimating the hours each needs

Divide a subject into units, estimate hours for each from a trial unit, adjust for difficulty, and compare the total with the hours you really have.

If something looks wrong, please tell us.

A syllabus is a long list, and a long list is hard to plan. To make a timetable you need to know how many hours each part is likely to take. The method is to divide the syllabus into units, time one trial unit, adjust for difficulty and add up. All hours below are invented for practice.

Step 1: divide into units

A unit should take roughly one to a few study sessions: a chapter or a topic. If a unit is so large that it will take weeks, split it. If it is so small that it takes ten minutes, join it with another. Use the syllabus headings as a guide.

Step 2: time a trial unit

Study one medium unit properly, including notes and a short set of questions, and write down the time it took. This is your base figure. It is better than guessing, because your pace is your own.

Step 3: adjust for difficulty

Difficulty adjustment (a starting guide; change it as you learn your pace)
Unit typeMultiply the base figure byReason
Easy (familiar)0.75You know part of it already
Medium1Like the trial unit
Hard (new or heavy)1.5More time to understand and practise

Worked example 1: Aman estimates one subject

  1. Step 1: the subject has 12 chapters. Aman sorts them: 4 easy, 5 medium, 3 hard.
  2. Step 2: he studies one medium chapter: 3 hours of study and 1 hour of questions, so 4 hours is his base.
  3. Step 3: easy chapters: 4 x 4 x 0.75 = 12 hours. Medium chapters: 5 x 4 x 1 = 20 hours. Hard chapters: 3 x 4 x 1.5 = 18 hours.
  4. Step 4: the total is 12 + 20 + 18 = 50 hours.
  5. Step 5: at 10 hours a week this subject needs 5 weeks.
  6. Result: he has a figure to plan with, rather than a feeling that the subject is 'big'.

Worked example 2: Divya compares need and supply

Divya has 4 subjects and 8 weeks. After estimating, she finds the hours needed for each: A 40 hours, B 40 hours, C 18 hours and D 30 hours. She has 14 study hours a week.

  1. Step 1: total needed = 40 + 40 + 18 + 30 = 128 hours.
  2. Step 2: total available = 8 x 14 = 112 hours.
  3. Step 3: the gap = 128 - 112 = 16 hours short.
  4. Step 4: options: add 2 hours a week (16 instead of 14), or extend by 2 weeks, or cut 16 hours from the lowest-priority topics.
  5. Step 5: she chooses to add two hours a week (16 instead of 14), which closes the gap exactly: 8 x 2 = 16 hours.
  6. Result: she found the shortfall on paper, in week 1, not in week 7.

Keep the estimate alive

  • After each unit, write the real time beside your estimate.
  • After four or five units, check your multipliers and change them.
  • Add a little for questions and mistakes: reading a unit is not the same as mastering it.

Divide, time a trial unit, adjust for difficulty, add up, and compare with the hours you really have.

Key takeaways

  • Units should be small enough to plan, large enough to matter.
  • A trial unit gives your own pace.
  • Total need versus total available shows the gap early.
  • Update estimates with real times.

Check your understanding

  1. 1. A trial unit takes 3 hours. A hard unit is 1.5 times as long. How long is it?

    1. 3.5 hours
    2. 4 hours
    3. 4.5 hours
    4. 5 hours
    Show answer

    Answer: C. 3 x 1.5 = 4.5 hours.

  2. 2. Total hours needed are 90; available are 6 weeks x 12 hours. What is the gap?

    1. 18 hours short
    2. 18 hours spare
    3. 12 hours short
    4. 6 hours short
    Show answer

    Answer: A. Available = 6 x 12 = 72 hours. 90 - 72 = 18 hours short.

  3. 3. Why time a trial unit instead of guessing?

    1. It shortens the syllabus
    2. It is required by every syllabus
    3. It removes the need for revision
    4. It gives your own real pace
    Show answer

    Answer: D. A trial unit measures how long you actually take, which is the figure to plan with.

  4. 4. An easy unit uses the multiplier 0.75. If the base is 4 hours, how long is it?

    1. 3.75 hours
    2. 3 hours
    3. 4.75 hours
    4. 2.5 hours
    Show answer

    Answer: B. 4 x 0.75 = 3 hours.

  5. 5. If your estimates keep proving too low, you should

    1. Update the multipliers from real times
    2. Ignore the real times and carry on
    3. Stop timing the units from now on
    4. Cut parts of the syllabus at random
    Show answer

    Answer: A. Real times are evidence. Using them to update the estimate makes the plan more accurate.

Privacy · Terms · Refunds · Delivery