• Practice
  • About 15 min
  • 5 practice questions

Balancing weak and strong subjects in the weekly timetable

Measure which subjects are weak from your own practice results, weigh them by their share of marks, share out weekly hours, and keep a maintenance floor for strong subjects.

If something looks wrong, please tell us.

Most students give their time by feeling: lots to the subject they enjoy, very little to the one they fear. Others swing the other way and drop strong subjects completely to chase the weak one, then watch their strong scores slip. A good timetable shares time by evidence: how weak each subject really is, and how much it counts in your exam.

Step 1: measure, do not guess

Use your recent practice. For each subject, take the accuracy over a fair number of questions (a few practice sets, not one bad day): accuracy = correct / attempted x 100. The gap is 100 minus accuracy. A subject at 40% accuracy has a gap of 60; one at 80% has a gap of 20.

Step 2: weigh by importance

Check your own exam's official scheme for how marks are shared between sections; do not rely on hearsay. Give each section a weight in proportion to its marks. If sections carry equal marks, all weights are 1.

Step 3: share hours by priority

Priority = weight x gap. Each subject's share of weekly hours = its priority / total priority. Then apply a maintenance floor: no subject drops below a minimum (for example two slots a week), because skills that are not practised fade.

Worked example 1: Rakesh, equal weights

Rakesh has 16 focused hours a week. Suppose, for illustration, his paper gives the four sections equal marks. His accuracy over his last few practice sets: Quantitative 40%, Reasoning 80%, English 70%, General Studies 50%.

Rakesh's allocation
SubjectAccuracyGapWeightPriorityHours = 16 x priority / 160After floor
Quantitative40%6016065
Reasoning80%2012023
English70%3013033
General Studies50%5015055
Total1601616

Working: total priority = 60 + 20 + 30 + 50 = 160. Quantitative = 16 x 60 / 160 = 6 hours; Reasoning = 16 x 20 / 160 = 2; English = 3; GS = 5. Check: 6 + 2 + 3 + 5 = 16. Floor: Rakesh sets a floor of 3 hours, so Reasoning rises from 2 to 3. The extra hour comes from Quantitative, the largest share, which falls to 5. Final: 5 + 3 + 3 + 5 = 16 hours.

Worked example 2: Neha, unequal weights

Neha has 12 focused hours. Suppose, for illustration, her paper gives Section X half the marks and Sections Y and Z a quarter each, so weights are 2, 1 and 1. Her accuracy: X 70% (gap 30), Y 60% (gap 40), Z 80% (gap 20).

Priorities: X = 2 x 30 = 60; Y = 1 x 40 = 40; Z = 1 x 20 = 20; total 120. Hours: X = 12 x 60 / 120 = 6; Y = 12 x 40 / 120 = 4; Z = 12 x 20 / 120 = 2. Check: 6 + 4 + 2 = 12. Z already meets her floor of 2 hours. Notice that Y is her weakest section by accuracy, yet X gets the most time, because improving X moves twice as many marks.

Placing the hours and common traps

  • Put the weakest high-priority subject in your best-energy slot; a strong subject can use a tired slot.
  • Comfort studying: spending extra time on a strong subject because it feels good. The numbers show it.
  • Abandoning strengths: a strong subject with zero hours slips quietly; the floor prevents this.
  • Measuring once: re-measure accuracy every two to four weeks and redo the shares, because gaps change as you improve.

Time follows need times weight: priority = weight x gap. Every subject keeps a maintenance floor.

Key takeaways

  • Judge weakness by accuracy over several practice sets, not by feeling.
  • Gap = 100 - accuracy; weight comes from the official marks share of each section.
  • Hours for a subject = weekly hours x its priority / total priority.
  • Set a floor so strong subjects are maintained.
  • Re-measure every few weeks; the allocation should change as gaps close.

Check your understanding

  1. 1. A student answers 45 of 75 attempted English questions correctly. What is the gap for English?

    1. 40
    2. 60
    3. 45
    4. 30
    Show answer

    Answer: A. Accuracy = 45 / 75 x 100 = 60%. Gap = 100 - 60 = 40.

  2. 2. Sections have weights 2 and 1, and gaps 25 and 50. Which statement is true?

    1. The first section has double priority
    2. The second section has double priority
    3. Priority cannot be compared
    4. Both sections have the same priority
    Show answer

    Answer: D. Priority = weight x gap: 2 x 25 = 50 and 1 x 50 = 50. They are equal.

  3. 3. Why does a timetable keep a maintenance floor for strong subjects?

    1. Strong subjects need the most time in every week
    2. Weak subjects should be avoided until the strong ones are done
    3. Skills that are not practised fade, so strong scores slip
    4. The floor makes the total number of weekly hours bigger
    Show answer

    Answer: C. Without some practice, a strong subject slowly weakens. The floor keeps it alive while most time goes to gaps; it does not increase total hours.

  4. 4. Total priority is 200 and a subject's priority is 50. With 20 focused hours a week, how many hours does it get before any floor?

    1. 4 hours
    2. 5 hours
    3. 2.5 hours
    4. 10 hours
    Show answer

    Answer: B. Hours = 20 x 50 / 200 = 5 hours.

  5. 5. Which is an example of 'comfort studying'?

    1. Spending extra hours on a subject at 85% accuracy because it feels satisfying
    2. Giving the best morning slot to the weakest heavy subject of the week
    3. Re-measuring accuracy in each subject every three weeks and adjusting the plan
    4. Keeping two short slots a week for a strong subject to maintain it
    Show answer

    Answer: A. Comfort studying is choosing time by enjoyment rather than need. The other three follow the method in this lesson.

Privacy · Terms · Refunds · Delivery