• Foundation
  • About 14 min
  • 5 practice questions

The basic numbers: attempts, accuracy, net score and time per section

Calculate attempts, correct, wrong, skipped, accuracy, net score under a stated marking scheme and time per question for each section, and say what each number means.

If something looks wrong, please tell us.

Before you can analyse a mock you need a few numbers, worked out correctly. They are simple, but students often mix them up, for example confusing accuracy with score. This lesson defines each one and works through two full examples. The marking scheme used here is an illustrative assumption, not the rule of any particular exam: always use your own exam's scheme.

The six basic numbers

Basic mock numbers
NumberHow to find itWhat it tells you
AttemptsQuestions you answeredHow much of the paper you took on
CorrectAnswers that matched the keyWhat you earned
WrongAttempts minus correctWhat cost you marks
SkippedTotal questions minus attemptsWhat you left or did not reach
AccuracyCorrect ÷ attempts × 100How reliable your answers were
Net scoreMarks for correct minus marks deducted for wrongThe result after any negative marking

Note that accuracy is calculated on attempts, not on the total number of questions. A student who attempts 40 questions and gets 36 right has 90% accuracy, even though 36 is only a small part of a 100-question paper.

Worked example 1: Arjun's mock

Suppose a paper has 100 questions, each worth +2 for a right answer, with 0.5 deducted for a wrong one, and no change for a skipped question. Arjun attempts 72 questions and gets 54 right.

  1. Wrong = 72 − 54 = 18.
  2. Skipped = 100 − 72 = 28.
  3. Accuracy = 54 ÷ 72 × 100 = 75%.
  4. Marks for correct = 54 × 2 = 108. Deduction = 18 × 0.5 = 9.
  5. Net score = 108 − 9 = 99 out of 200.
  6. Each wrong answer cost him 2.5 marks compared with getting it right (the 2 he did not earn plus the 0.5 deducted), so the 18 wrong answers cost 18 × 2.5 = 45 marks of possible score.

Worked example 2: Sana attempts more

Under the same assumed scheme, Sana attempts 85 questions and gets 58 right. Wrong = 85 − 58 = 27. Accuracy = 58 ÷ 85 × 100 ≈ 68.2%. Marks = 58 × 2 = 116; deduction = 27 × 0.5 = 13.5; net = 116 − 13.5 = 102.5. Sana's accuracy is lower than Arjun's, yet her net score is 3.5 marks higher, because she attempted 13 more questions. Neither accuracy nor attempts alone tells the whole story; you need both, and the net score that combines them.

Time per section

If you wrote checkpoints, you can find how long each section took. Suppose Arjun's paper was 60 minutes long with four sections of 25 questions each, and his checkpoints show these times:

Arjun's time per section (total 22 + 14 + 12 + 12 = 60 minutes)
SectionMinutes usedTime per question
A2222 ÷ 25 = 0.88 min, about 53 seconds
B1414 ÷ 25 = 0.56 min, about 34 seconds
C1212 ÷ 25 = 0.48 min, about 29 seconds
D1212 ÷ 25 = 0.48 min, about 29 seconds

Section A took almost twice as long per question as C and D. That alone does not mean A was badly handled; it may simply be the harder section. But it is the first place to look when you ask why the last questions were rushed or skipped.

Accuracy = correct ÷ attempts. Net score = marks for correct − deductions for wrong. Always state the marking scheme you used.

Key takeaways

  • Wrong = attempts − correct; skipped = total − attempts.
  • Accuracy is measured on attempts, not on the whole paper.
  • Net score combines attempts and accuracy, so compare students and mocks on net score, then look at both parts.
  • Time per section, from your checkpoints, shows where the clock went.

Check your understanding

  1. 1. A student attempts 60 questions and gets 45 right. What is the accuracy?

    1. 75%
    2. 45%
    3. 60%
    4. 80%
    Show answer

    Answer: A. Accuracy = correct ÷ attempts × 100 = 45 ÷ 60 × 100 = 75%. It is calculated on attempts, not on the total number of questions.

  2. 2. Suppose a paper gives +2 for a right answer and deducts 0.5 for a wrong one. A student gets 50 right and 20 wrong. What is the net score?

    1. 90
    2. 100
    3. 95
    4. 80
    Show answer

    Answer: A. Marks = 50 × 2 = 100. Deduction = 20 × 0.5 = 10. Net = 100 − 10 = 90.

  3. 3. In a 100-question paper, a student attempts 78 questions and gets 61 right. How many were skipped?

    1. 17
    2. 22
    3. 39
    4. 61
    Show answer

    Answer: B. Skipped = total − attempts = 100 − 78 = 22. (17 is the number wrong: 78 − 61.)

  4. 4. Under +2 for right and −0.5 for wrong, how much does one wrong answer cost compared with getting that question right?

    1. 0.5 marks
    2. 2 marks
    3. 1.5 marks
    4. 2.5 marks
    Show answer

    Answer: D. A right answer gives +2; a wrong one gives −0.5. The gap is 2 − (−0.5) = 2.5 marks.

  5. 5. A section of 20 questions took 16 minutes. What was the time per question?

    1. 0.8 minutes, about 48 seconds
    2. 1.25 minutes, about 75 seconds
    3. 0.6 minutes, about 36 seconds
    4. 1.6 minutes, about 96 seconds
    Show answer

    Answer: A. 16 ÷ 20 = 0.8 minutes, and 0.8 × 60 = 48 seconds.

Privacy · Terms · Refunds · Delivery