- Advanced
- About 15 min
- 5 practice questions
Finding your speed-accuracy sweet spot from your own data
Run the same kind of set at several paces, score each under an assumed marking scheme, and pick the pace that gives you the most marks rather than the most attempts.
If something looks wrong, please tell us.
Going faster lets you reach more questions but costs some accuracy. Going slower protects accuracy but leaves questions unreached. Somewhere between the two is the pace that gives you the most marks: your sweet spot. It is different for every student and for every question type, and it cannot be guessed. It has to be measured. This lesson shows how to find it from your own practice data.
How to collect the data
- Choose one question type and one set size and time, for example 40 questions in 30 minutes.
- Decide three or four paces to test, from careful to aggressive. A simple way: decide in advance how many questions you will aim to attempt.
- Run at least three sets at each pace over a week or two, using fresh questions, and total the results for each pace.
- Score every pace under the same assumed marking scheme. If your exam has no negative marking, simply count right answers.
Worked example 1: Siddharth tests four paces
Siddharth, a graduate preparing full-time in Prayagraj, uses 40-question, 30-minute sets of quantitative questions. He assumes, for illustration, +2 for a right answer and -0.5 for a wrong one. These are his averaged results.
| Pace | Attempted | Right | Wrong | Sec / question | Accuracy | Net score |
|---|---|---|---|---|---|---|
| A (careful) | 26 | 24 | 2 | 1,800 / 26 = 69.2 | 92.3% | 48 - 1 = 47 |
| B | 32 | 28 | 4 | 1,800 / 32 = 56.3 | 87.5% | 56 - 2 = 54 |
| C | 38 | 29 | 9 | 1,800 / 38 = 47.4 | 76.3% | 58 - 4.5 = 53.5 |
| D (all-out) | 40 | 27 | 13 | 1,800 / 40 = 45 | 67.5% | 54 - 6.5 = 47.5 |
The net score rises from A to B, then falls. Pace B, about 56 seconds per question, is his sweet spot. Going from B to C added 6 attempts but only 1 more right answer and 5 more wrong ones, so the net score dropped by 0.5. Going all-out at D gave him fewer right answers than B: at that speed his methods started to break down.
Worked example 2: Lakshmi, with no negative marking
Lakshmi, a working mother in Coimbatore, practises 50-question sets in 40 minutes and assumes no negative marking. Now only right answers count.
| Pace | Attempted | Right | Accuracy |
|---|---|---|---|
| X | 34 | 30 | 30 / 34 = 88.2% |
| Y | 40 | 33 | 33 / 40 = 82.5% |
| Z | 45 | 31 | 31 / 45 = 68.9% |
Pace Y gives the most right answers, 33, so Y is her sweet spot. Even without negative marking, the fastest pace is not best: at Z she rushed into errors on questions she would otherwise have got right. Whether to guess on questions left at the end is a separate decision covered in the Handling Negative Marking course.
Reading the curve
- If net score keeps rising all the way to your fastest pace, test a faster one; you have not yet found the top.
- If the top is flat (two paces within a mark of each other), prefer the slower one: it is more robust on a bad day.
- Repeat the test every few weeks. As your methods improve, the sweet spot usually moves faster.
- Find a separate sweet spot for each major question type; one pace for everything hides big differences.
Your sweet spot is the pace with the highest net score in your own data, not the pace with the most attempts.
Key takeaways
- Test three or four paces on the same kind of set, several sets each.
- Score each pace under the same assumed scheme; without negative marking, count right answers.
- The best pace is where the net score peaks; on a flat top, choose the slower pace.
- Re-measure every few weeks and per question type.
Check your understanding
-
1. Suppose +2 for a right answer and -0.5 for a wrong one. A pace gives 30 attempted and 26 right. What is the net score?
- 50
- 52
- 48
- 45
Show answer
Answer: A. Wrong = 30 - 26 = 4. Net = 26 x 2 - 4 x 0.5 = 52 - 2 = 50.
-
2. With +1 right and -0.25 wrong: pace P gives 22 right of 24, pace Q gives 26 right of 30, pace R gives 27 right of 36. Which is the sweet spot?
- Q
- P
- R
- P and R equally
Show answer
Answer: A. P: 22 - 2 x 0.25 = 21.5. Q: 26 - 4 x 0.25 = 25. R: 27 - 9 x 0.25 = 24.75. Q is highest.
-
3. With no negative marking, how do you pick the sweet spot?
- The pace with the highest accuracy
- The pace with the most attempts
- The slowest pace tested
- The pace with the most right answers
Show answer
Answer: D. Without negative marking, the score is the number of right answers, so the pace producing most right answers is best.
-
4. Why run at least three sets at each pace before deciding?
- Three is the number required by every exam
- A single set can be unusually easy or hard, so totals are more reliable
- It makes accuracy rise automatically
- Fewer sets would make the scheme invalid
Show answer
Answer: B. One set may be unusually easy or hard. Totalling several sets smooths that out.
-
5. Two paces give net scores of 54 and 53.5, the faster being 53.5. Which should you prefer?
- The slower pace with 54, which also holds up better on a bad day
- The faster pace, because faster is always better
- Neither; start again with new paces
- Whichever pace you tested last
Show answer
Answer: A. 54 is higher, and on a near-flat top the slower pace is more robust, so both reasons point the same way.
Sign in to keep track of the lessons you finish.