- Practice
- About 18 min
- 5 practice questions
Constructions: similar triangles and triangles from base and vertical angle
Construct a triangle similar to a given one with a scale factor smaller or larger than 1, construct the segment of a circle containing a given angle, and use it to construct a triangle from its base, vertical angle and the median, altitude or bisector point.
If something looks wrong, please tell us.
By the end of this lesson you can
- Follow and explain the steps for constructing a triangle similar to a given triangle with a given scale factor.
- Construct a segment of a circle on a line segment that contains a given angle, and explain why it works.
- Construct a triangle given its base and vertical angle together with the median, the altitude, or the point where the bisector of the vertical angle meets the base.
Constructions with ruler and compasses turn the theorems of the last two lessons into drawings. The Basic Proportionality Theorem explains how to scale a triangle up or down, and the fact that angles in the same segment of a circle are equal explains how to draw every triangle that has a given base and a given angle opposite it. Keep a sharp pencil and draw a rough figure first.
Scale factor
The scale factor is the ratio of a side of the new triangle to the corresponding side of the given triangle. A scale factor less than 1 gives a smaller triangle; more than 1 gives a larger one. For example, if a triangle with BC = 9 cm is drawn with scale factor 2/3, the new side is 9 × 2/3 = 6 cm, and every other side shrinks in the same ratio.
Constructing a similar triangle with scale factor m/n
- Draw the given triangle PQR.
- From Q draw a ray QX making an acute angle with QR, on the side away from P.
- Mark the larger of m and n equal steps Q₁, Q₂, Q₃, … along QX with your compasses.
- If m/n < 1 (say 3/4): join the 4th point Q₄ to R, then draw through the 3rd point Q₃ a line parallel to Q₄R, meeting QR at R′.
- If m/n > 1 (say 5/3): join the 3rd point Q₃ to R, then draw through the 5th point Q₅ a line parallel to Q₃R, meeting QR extended at R′.
- Through R′ draw a line parallel to RP, meeting QP (extended if needed) at P′. Then P′QR′ is the required triangle.
Why it works: the parallel lines cut QX and QR proportionally (Basic Proportionality Theorem), so QR′ : QR = 3 : 4 (or 5 : 3). Then R′P′ ∥ RP makes ΔP′QR′ ~ ΔPQR by AA, so every side is scaled by the same factor.
The segment of a circle containing a given angle
All triangles with the same base and the same vertical angle have their third vertices on one arc of a circle, because angles in the same segment of a circle are equal (the alternate segment theorem gives the same result). To construct the segment on AB containing angle θ:
Segment on AB containing the angle θ
- Draw AB The given base.
- At A draw AE with ∠BAE = θ AE plays the part of a tangent at A.
- At A draw AF ⊥ AE So ∠BAF = 90° − θ; the centre lies on AF.
- Draw the perpendicular bisector of AB It meets AF at O.
- Draw the circle with centre O, radius OA Every point C on the major arc gives ∠ACB = θ.
Worked example 1: base, vertical angle and median
Construct ΔPQR with base PQ = 7 cm, ∠R = 50° and median RG = 4.5 cm. Steps: draw PQ = 7 cm and construct the segment on PQ containing 50° as above. The perpendicular bisector of PQ meets PQ at its midpoint G. With centre G and radius 4.5 cm, draw arcs cutting the arc of the circle at R (and S). Join PR and QR. ΔPQR is the required triangle; ΔPQS is a second answer. You can then draw the altitude from R and measure it.
Worked example 2: base, vertical angle and altitude
Construct ΔPQR with QR = 6 cm, ∠P = 40° and altitude from P equal to 4 cm. Steps: draw QR = 6 cm and the segment on QR containing 40°. On the perpendicular bisector of QR, mark M at 4 cm from QR on the same side as the arc. Through M draw a line parallel to QR; it meets the arc at P (and S). Join QP and RP. ΔPQR is the required triangle, because every point on the parallel line is 4 cm from QR.
Worked example 3: base, vertical angle and the bisector point
Construct ΔABC with BC = 7 cm, ∠A = 60° and the bisector of ∠A meeting BC at D with BD = 4 cm. Steps: draw BC = 7 cm and the segment on BC containing 60°. Mark D on BC with BD = 4 cm. The perpendicular bisector of BC meets the circle at I, on the side of BC away from the arc. Join I to D and extend it to meet the circle at A. Join AB and AC. ΔABC is the required triangle. It works because I is the midpoint of arc BC, so equal arcs BI and IC give equal angles ∠BAI and ∠IAC: AI is the bisector of ∠A.
| Given with the base and vertical angle | Where the third vertex lies |
|---|---|
| Median from the vertex | On the arc, at the given distance from the midpoint of the base |
| Altitude from the vertex | On the arc and on a line parallel to the base at the given height |
| Point D where the bisector meets the base | Where the line from I (midpoint of the opposite arc) through D meets the arc again |
Key takeaways: to scale a triangle by m/n, step out the larger of m and n along a ray and use parallel lines, which the Basic Proportionality Theorem justifies. A segment of a circle on the base holds every vertex with the required vertical angle. Then the median, altitude or bisector condition picks out the exact vertex; usually there are two mirror-image answers.
Check your understanding
-
1. To construct a triangle whose sides are 3/5 of the sides of ΔPQR, how many equal steps are marked on the ray QX?
- 3
- 5
- 8
- 2
Show answer
Answer: B. Mark the greater of the two numbers 3 and 5, that is 5 equal steps. Then join the 5th point to R and draw a parallel through the 3rd point.
-
2. ΔABC has BC = 9 cm. A similar triangle is constructed with scale factor 2/3. What is the side corresponding to BC?
- 6 cm
- 13.5 cm
- 4.5 cm
- 3 cm
Show answer
Answer: A. Multiply by the scale factor: 9 × 2/3 = 6 cm. A scale factor below 1 gives a smaller triangle; 13.5 cm would come from 3/2.
-
3. Why do all triangles drawn on a base BC with their third vertex on the major arc of the constructed circle have the same vertical angle?
- The base is the diameter
- The radii are equal
- Angles in the same segment of a circle are equal
- The perpendicular bisector passes through the centre
Show answer
Answer: C. Every such vertex lies in the same segment of the circle cut off by the chord BC, and angles in the same segment are equal. So every one of these triangles has the same angle opposite BC.
-
4. In constructing a triangle from its base, vertical angle and median, how is the third vertex located on the arc?
- Where the arc meets the base produced
- Where a line parallel to the base meets the arc
- At the highest point of the arc
- Where an arc centred at the midpoint of the base, with radius equal to the median, cuts the arc
Show answer
Answer: D. The median joins the vertex to the midpoint G of the base, so the vertex is at the median's distance from G: draw an arc with centre G and that radius. The parallel-line method is used for a given altitude instead.
-
5. When the base, the vertical angle and the altitude are given, the third vertex lies on the arc and also on
- a line parallel to the base at a distance equal to the altitude
- the perpendicular bisector of the base
- a circle centred at one end of the base
- the line joining the centre to the base
Show answer
Answer: A. The altitude is the perpendicular distance of the vertex from the base, and all points at that distance on one side lie on a line parallel to the base. Its intersections with the arc give the vertex.
Sign in to keep track of the lessons you finish.