• Practice
  • About 16 min
  • 5 practice questions

Collinear points and the area of a quadrilateral

Use 'area = 0' to test whether three points lie on one line and to find unknown coordinates, then find the area of a quadrilateral from its four vertices taken in order.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Decide whether three points are collinear using the area of the triangle they form.
  • Find one or two unknown coordinates from the collinearity condition.
  • Find the area of a quadrilateral from its vertices, with the vertices taken in anticlockwise order.
  • Use the area in practical problems such as costing a plot of land.

Three points do not always make a triangle. If they lie on the same straight line, the 'triangle' is flat: it has no height, so its area is zero. Turning that idea around gives a quick algebraic test for points lying on a line. The same area formula, extended to four points, gives the area of any quadrilateral.

Collinearity of three points

Three distinct points A(x₁, y₁), B(x₂, y₂) and C(x₃, y₃) are collinear (lie on one straight line) if and only if the area of triangle ABC is 0. Since the area is half of an expression, this is the same as saying the expression itself is zero.

A, B, C are collinear if and only if x₁(y₂ − y₃) + x₂(y₃ − y₁) + x₃(y₁ − y₂) = 0, that is, x₁y₂ + x₂y₃ + x₃y₁ = x₂y₁ + x₃y₂ + x₁y₃.

— Collinearity condition

Worked example 1: testing three points

Are (1, 5), (3, 9) and (−2, −1) collinear? Working: 1(9 − (−1)) + 3(−1 − 5) + (−2)(5 − 9) = 1 × 10 + 3 × (−6) + (−2)(−4) = 10 − 18 + 8 = 0. The area is 0, so the points are collinear. (A second check for later: the rise from (1, 5) to (3, 9) is 4 for a run of 2, and from (3, 9) to (−2, −1) it is −10 for a run of −5; both give 2.)

Worked example 2: one unknown

Find a if (2, 3), (5, a) and (8, 9) are collinear. Working: 2(a − 9) + 5(9 − 3) + 8(3 − a) = 0, so 2a − 18 + 30 + 24 − 8a = 0, giving −6a + 36 = 0 and a = 6. Check: (5, 6) is exactly the mid-point of (2, 3) and (8, 9), since (2 + 8)/2 = 5 and (3 + 9)/2 = 6, and a mid-point is certainly on the line.

Worked example 3: two unknowns

The points (−2, 1), (a, b) and (4, 7) are collinear and a + b = 5. Find a and b. Working: −2(b − 7) + a(7 − 1) + 4(1 − b) = 0, so −2b + 14 + 6a + 4 − 4b = 0, giving 6a − 6b + 18 = 0, that is, a − b = −3. Adding this to a + b = 5 gives 2a = 2, so a = 1 and b = 4. Check: the line through (−2, 1) and (4, 7) rises 6 for a run of 6, so it is y = x + 3, and (1, 4) satisfies 4 = 1 + 3.

Area of a quadrilateral

To find the area of a quadrilateral ABCD, cut it along a diagonal into two triangles that do not overlap, find each area and add. Doing this in general with A(x₁, y₁), B(x₂, y₂), C(x₃, y₃), D(x₄, y₄) and simplifying gives one formula. Take the vertices in order, anticlockwise, and write them in columns exactly as for a triangle, repeating the first point at the end: x₁ x₂ x₃ x₄ x₁ above y₁ y₂ y₃ y₄ y₁.

Area of quadrilateral ABCD = ½ {(x₁y₂ + x₂y₃ + x₃y₄ + x₄y₁) − (x₂y₁ + x₃y₂ + x₄y₃ + x₁y₄)} square units = ½ {(x₁ − x₃)(y₂ − y₄) − (x₂ − x₄)(y₁ − y₃)} square units.

— Area of a quadrilateral from its vertices

Triangle and quadrilateral area by coordinates

  • Triangle ABC
    • Write x₁ x₂ x₃ x₁ over y₁ y₂ y₃ y₁
    • 3 downward and 3 upward products
    • Area 0 means the points are collinear
  • Quadrilateral ABCD
    • Write x₁ x₂ x₃ x₄ x₁ over y₁ y₂ y₃ y₄ y₁
    • 4 downward and 4 upward products
    • Vertices must go round the figure in order
In both cases: subtract, halve, and give a positive answer in square units.

Why must the points go round in order? If you list them as A, C, B, D, the 'shape' you describe crosses over itself and the formula no longer gives the area of the quadrilateral. Plot a rough sketch first.

Worked example 4: area of a quadrilateral

Find the area of the quadrilateral with vertices A(1, 1), B(7, 2), C(6, 6), D(2, 5), which go anticlockwise. Downward products: 1 × 2 + 7 × 6 + 6 × 5 + 2 × 1 = 2 + 42 + 30 + 2 = 76. Upward products: 7 × 1 + 6 × 2 + 2 × 6 + 1 × 5 = 7 + 12 + 12 + 5 = 36. Area = ½(76 − 36) = ½ × 40 = 20 square units. Check by splitting along AC: triangle ABC gives ½{1(2 − 6) + 7(6 − 1) + 6(1 − 2)} = ½(−4 + 35 − 6) = 12.5, and triangle ACD gives ½{1(6 − 5) + 6(5 − 1) + 2(1 − 6)} = ½(1 + 24 − 10) = 7.5. Total 12.5 + 7.5 = 20.

Worked example 5: costing a plot (made-up data)

A plot has corners at (0, 0), (8, 0), (10, 6) and (2, 6), with distances in metres. Levelling costs ₹50 per square metre. Downward products: 0 × 0 + 8 × 6 + 10 × 6 + 2 × 0 = 0 + 48 + 60 + 0 = 108. Upward products: 8 × 0 + 10 × 0 + 2 × 6 + 0 × 6 = 0 + 0 + 12 + 0 = 12. Area = ½(108 − 12) = 48 m². (Check: it is a parallelogram with base 8 m and height 6 m, and 8 × 6 = 48.) Cost = 48 × ₹50 = ₹2,400.

Key takeaways: three points are collinear exactly when the triangle they form has area 0. The collinearity condition gives one equation, so with two unknowns you need one more fact. For a quadrilateral, take the vertices anticlockwise in order and use the four-point version of the column method; the area is always given as a positive number.

Check your understanding

  1. 1. Are the points (1, 2), (3, 6) and (5, 10) collinear?

    1. No, the area is 4 square units
    2. Yes, because the area of the triangle they form is 0
    3. No, because none of them is the origin
    4. Yes, because all the coordinates are positive
    Show answer

    Answer: B. 1(6 − 10) + 3(10 − 2) + 5(2 − 6) = −4 + 24 − 20 = 0. The area is 0, so the points are collinear (they all lie on y = 2x). Positive coordinates or the origin have nothing to do with it.

  2. 2. For what value of k are (k, 1), (2, 3) and (4, 5) collinear?

    1. k = 1
    2. k = 2
    3. k = −1
    4. k = 0
    Show answer

    Answer: D. k(3 − 5) + 2(5 − 1) + 4(1 − 3) = −2k + 8 − 8 = −2k. Setting −2k = 0 gives k = 0. Check: the line through (2, 3) and (4, 5) is y = x + 1, which meets y = 1 at x = 0.

  3. 3. Find the area of the quadrilateral with vertices (−1, −2), (5, −1), (4, 4) and (−2, 3), taken in order.

    1. 62 square units
    2. 15.5 square units
    3. 29 square units
    4. 31 square units
    Show answer

    Answer: D. Downward products: (−1)(−1) + 5 × 4 + 4 × 3 + (−2)(−2) = 1 + 20 + 12 + 4 = 37. Upward products: 5(−2) + 4(−1) + (−2)(4) + (−1)(3) = −10 − 4 − 8 − 3 = −25. Area = ½(37 − (−25)) = ½ × 62 = 31 square units.

  4. 4. The points (0, 1), (a, b) and (4, 9) are collinear and a + b = 7. What are a and b?

    1. a = 2, b = 5
    2. a = 3, b = 4
    3. a = 5, b = 2
    4. a = 1, b = 6
    Show answer

    Answer: A. 0(b − 9) + a(9 − 1) + 4(1 − b) = 0 gives 8a + 4 − 4b = 0, so 2a − b = −1. With a + b = 7, adding gives 3a = 6, so a = 2 and b = 5. Check: the line through (0, 1) and (4, 9) is y = 2x + 1, and 2 × 2 + 1 = 5.

  5. 5. Why must the four vertices be taken in order round the figure when using the quadrilateral area formula?

    1. Because the formula works only for squares
    2. Because the answer is always negative otherwise
    3. Because listing them out of order describes a self-crossing figure, so the formula no longer gives the quadrilateral's area
    4. Because the first vertex must be the origin
    Show answer

    Answer: C. The formula adds the areas of non-overlapping triangles cut by a diagonal. If the vertices are listed out of order (for example A, C, B, D), the path crosses itself and the result is not the area of ABCD. Going round anticlockwise also keeps the value positive.

Privacy · Terms · Refunds · Delivery