Revision notes

Chapter 5 Coordinate Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Recalling the basic formulae and the area of a triangle from its vertices

Formulae recalled from earlier classes
ResultFormula
Distance AB√[(x₂ − x₁)² + (y₂ − y₁)²]
Mid-point of AB((x₁ + x₂)/2, (y₁ + y₂)/2)
P divides AB internally in the ratio m : n((mx₂ + nx₁)/(m + n), (my₂ + ny₁)/(m + n))
P divides AB externally in the ratio m : n((mx₂ − nx₁)/(m − n), (my₂ − ny₁)/(m − n))
Centroid G of triangle ABC((x₁ + x₂ + x₃)/3, (y₁ + y₂ + y₃)/3)

Area of triangle ABC = ½ |x₁(y₂ − y₃) + x₂(y₃ − y₁) + x₃(y₁ − y₂)| square units. Equivalent form: ½ {(x₁y₂ + x₂y₃ + x₃y₁) − (x₂y₁ + x₃y₂ + x₁y₃)} square units.

— Area of a triangle from its vertices

Finding the area of a triangle from its vertices

  1. Plot roughly Sketch the three points so you can name them A, B, C going anticlockwise.
  2. Write the columns x₁ x₂ x₃ x₁ above y₁ y₂ y₃ y₁ (the first point repeats at the end).
  3. Downward products Add x₁y₂ + x₂y₃ + x₃y₁.
  4. Upward products Add x₂y₁ + x₃y₂ + x₁y₃.
  5. Subtract and halve Area = ½ (first total − second total), in square units.
If the answer comes out negative the points were clockwise: take the absolute value, because an area is never negative.

Key takeaways: keep the distance, mid-point, section and centroid formulae at your fingertips. The area of a triangle with vertices (x₁, y₁), (x₂, y₂), (x₃, y₃) is ½ |x₁(y₂ − y₃) + x₂(y₃ − y₁) + x₃(y₁ − y₂)| square units. Take the vertices anticlockwise, and if a negative value appears, use its absolute value.

Read the full lesson

Lesson 2

Collinear points and the area of a quadrilateral

A, B, C are collinear if and only if x₁(y₂ − y₃) + x₂(y₃ − y₁) + x₃(y₁ − y₂) = 0, that is, x₁y₂ + x₂y₃ + x₃y₁ = x₂y₁ + x₃y₂ + x₁y₃.

— Collinearity condition

Area of quadrilateral ABCD = ½ {(x₁y₂ + x₂y₃ + x₃y₄ + x₄y₁) − (x₂y₁ + x₃y₂ + x₄y₃ + x₁y₄)} square units = ½ {(x₁ − x₃)(y₂ − y₄) − (x₂ − x₄)(y₁ − y₃)} square units.

— Area of a quadrilateral from its vertices

Triangle and quadrilateral area by coordinates

  • Triangle ABC
    • Write x₁ x₂ x₃ x₁ over y₁ y₂ y₃ y₁
    • 3 downward and 3 upward products
    • Area 0 means the points are collinear
  • Quadrilateral ABCD
    • Write x₁ x₂ x₃ x₄ x₁ over y₁ y₂ y₃ y₄ y₁
    • 4 downward and 4 upward products
    • Vertices must go round the figure in order
In both cases: subtract, halve, and give a positive answer in square units.

Key takeaways: three points are collinear exactly when the triangle they form has area 0. The collinearity condition gives one equation, so with two unknowns you need one more fact. For a quadrilateral, take the vertices anticlockwise in order and use the four-point version of the column method; the area is always given as a positive number.

Read the full lesson

Lesson 3

Inclination and slope of a line, and slopes of parallel and perpendicular lines

Slope m = tan θ = (y₂ − y₁)/(x₂ − x₁) = (difference in y coordinates) ÷ (difference in x coordinates), x₁ ≠ x₂. A vertical line has undefined slope.

— Slope of a straight line
How the inclination decides the slope
Inclination θSlope m = tan θWhat the line does
θ = 0°0Horizontal (parallel to the X axis)
0° < θ < 90°PositiveRises from left to right
θ = 90°UndefinedVertical (parallel to the Y axis)
90° < θ < 180°NegativeFalls from left to right

Two lines with slopes m₁ and m₂

  • Parallel
    • m₁ = m₂
    • Same inclination
    • Example: slopes 2 and 2
  • Perpendicular
    • m₁ × m₂ = −1
    • Each slope is the negative reciprocal of the other
    • Example: slopes 2 and −1/2
Both tests need slopes that exist; the X and Y axes are perpendicular but the Y axis has no slope.

Key takeaways: inclination is measured anticlockwise from the positive X axis; slope m = tan θ = (y₂ − y₁)/(x₂ − x₁). Positive slopes rise, negative slopes fall, zero is horizontal and vertical lines have no slope. Parallel lines have equal slopes; perpendicular lines have slopes whose product is −1.

Read the full lesson

Lesson 4

Equations of a straight line: axes, slope-intercept, point-slope, two-point and intercept forms

Equations of a straight line
FormEquationWhat you need
Slope-intercepty = mx + cSlope m and y intercept c
Point-slopey − y₁ = m(x − x₁)Slope m and one point (x₁, y₁)
Two-point(y − y₁)/(y₂ − y₁) = (x − x₁)/(x₂ − x₁)Two points (x₁, y₁) and (x₂, y₂)
Interceptx/a + y/b = 1x intercept a and y intercept b (both non-zero)

Which equation form to use

  • Slope and y intercept known
    • y = mx + c
  • Slope (or inclination) and a point known
    • y − y₁ = m(x − x₁)
    • m = tan θ if the inclination is given
  • Two points known
    • Two-point form
    • or find m first, then point-slope
  • Both intercepts known
    • x/a + y/b = 1
Whatever form you start with, you can always rewrite the answer as ax + by + c = 0.

Key takeaways: y = b and x = c are lines parallel to the axes. Pick the form from the facts: y = mx + c, y − y₁ = m(x − x₁), the two-point form, or x/a + y/b = 1. Check your final equation by substituting the given points.

Read the full lesson

Lesson 5

General form of a straight line: slope, and lines parallel or perpendicular to ax + by + c = 0

For ax + by + c = 0: slope m = −a/b = −(coefficient of x) ÷ (coefficient of y); y intercept = −c/b = −(constant term) ÷ (coefficient of y); x intercept = −c/a.

— Reading the general form

Two lines a₁x + b₁y + c₁ = 0 and a₂x + b₂y + c₂ = 0

  • Parallel
    • a₁/a₂ = b₁/b₂
    • Equivalently a₁b₂ − a₂b₁ = 0
    • Family: ax + by + k = 0
  • Perpendicular
    • a₁a₂ + b₁b₂ = 0
    • Slopes multiply to −1
    • Family: bx − ay + k = 0
Swap a and b and change one sign to turn a line into a perpendicular one.

Line through a point P parallel or perpendicular to ax + by + c = 0

  1. Write the family Parallel: ax + by + k = 0. Perpendicular: bx − ay + k = 0.
  2. Substitute P Put the coordinates of P into the family's equation.
  3. Solve for k This gives one value of k.
  4. Write and check Substitute P again and compare slopes.

Key takeaways: for ax + by + c = 0 the slope is −a/b and the y intercept is −c/b. Two lines are parallel when a₁/a₂ = b₁/b₂ and perpendicular when a₁a₂ + b₁b₂ = 0. Lines parallel to ax + by + c = 0 are ax + by + k = 0, perpendicular ones are bx − ay + k = 0; find k from the given point.

Read the full lesson

Privacy · Terms · Refunds · Delivery