• Practice
  • About 17 min
  • 5 practice questions

Standard deviation by short-cut methods, its properties and correcting errors

Use the assumed mean and step deviation methods for ungrouped data, see how adding or multiplying by a constant changes the standard deviation, use the variance of the first n natural numbers, and correct a mean and standard deviation after a wrong entry.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Find σ by the assumed mean method: σ = √[Σd²/n − (Σd/n)²] with d = x − A.
  • Find σ by the step deviation method when values share a common factor c.
  • State what happens to σ when a constant is added to, or multiplied into, every value.
  • Use variance (n² − 1)/12 for 1, 2, ..., n, and correct σ when a value was recorded wrongly.

When the mean is not a whole number, the mean method turns into messy decimals. The Tamil Nadu textbook offers two short cuts that keep the numbers small. Both rest on one fact: shifting every value by the same amount does not change how spread out the values are.

Assumed mean method

Choose a convenient value A (an assumed mean, usually a middle value) and find dᵢ = xᵢ − A. The spread of the d values equals the spread of the x values, so we can work with the smaller d values.

Assumed mean method: σ = √[Σd²/n − (Σd/n)²], where d = x − A. Step deviation method: σ = c × √[Σd²/n − (Σd/n)²], where d = (x − A)/c.

— Short-cut formulae

Worked example 1: assumed mean

Find σ for 41, 44, 47, 50, 53, 56. The mean is 291/6 = 48.5, not a whole number, so take A = 47. d = −6, −3, 0, 3, 6, 9. Σd = 9. d² = 36, 9, 0, 9, 36, 81, so Σd² = 171. σ² = 171/6 − (9/6)² = 28.5 − 2.25 = 26.25, so σ = √26.25 ≈ 5.12.

Worked example 2: step deviation

Find σ for 20, 40, 60, 80, 100. Take A = 60 and c = 20, so d = (x − 60)/20 = −2, −1, 0, 1, 2. Σd = 0 and Σd² = 4 + 1 + 0 + 1 + 4 = 10. σ = 20 × √(10/5 − 0²) = 20 × √2 ≈ 20 × 1.414 = 28.28.

What changes and what does not

Effect of changing every value

  • Add or subtract a constant k
    • Mean changes by k
    • Standard deviation unchanged
    • Variance unchanged
  • Multiply by a constant k
    • Mean is multiplied by k
    • Standard deviation multiplied by k (k > 0)
    • Variance multiplied by k²
Spread depends on the gaps between values, and adding a constant does not change the gaps.

Worked example 3: properties in action

The data 2, 4, 6, 8, 10 has σ = √8 ≈ 2.83 (lesson 1). Adding 5 to every value gives 7, 9, 11, 13, 15: the gaps are unchanged, so σ is still √8 ≈ 2.83. Multiplying every value by 3 gives 6, 12, 18, 24, 30: σ becomes 3√8 ≈ 8.49 and the variance becomes 9 × 8 = 72.

The first n natural numbers

For 1, 2, 3, ..., n the mean is (n + 1)/2. Using Σx = n(n + 1)/2 and Σx² = n(n + 1)(2n + 1)/6 in the direct method gives a neat result.

For 1, 2, 3, ..., n: mean = (n + 1)/2 and variance σ² = (n² − 1)/12.

— First n natural numbers

For example, for 1 to 10, σ² = (100 − 1)/12 = 99/12 = 8.25 and σ ≈ 2.87. Combined with the properties, any list of equally spaced values with gap c has variance c²(n² − 1)/12. Check with example 1: gap 3, n = 6, variance 9 × 35/12 = 26.25.

Correcting a wrong observation

Worked example 4: one value recorded wrongly

For 20 observations the mean was 15 and the standard deviation 4. Later it was found that 12 had been recorded as 21. Find the correct mean and standard deviation. Wrong Σx = 20 × 15 = 300; correct Σx = 300 − 21 + 12 = 291, so the correct mean = 291/20 = 14.55. From σ² = Σx²/n − x̄²: 16 = Σx²/20 − 225, so wrong Σx² = 20 × 241 = 4820. Correct Σx² = 4820 − 21² + 12² = 4820 − 441 + 144 = 4523. Correct σ² = 4523/20 − 14.55² = 226.15 − 211.7025 = 14.4475, so σ ≈ 3.80.

Key takeaways: with an assumed mean A, use d = x − A; with a common factor c, use d = (x − A)/c and multiply the root by c. Adding a constant leaves σ unchanged; multiplying by k multiplies σ by k. For 1 to n, variance = (n² − 1)/12. To correct an error, rebuild Σx and Σx² from the mean and σ, swap the wrong value for the right one, and recompute.

Check your understanding

  1. 1. Using step deviation, what is the standard deviation of 5, 10, 15, 20, 25?

    1. 5
    2. 7.07
    3. 10
    4. 50
    Show answer

    Answer: B. Take A = 15 and c = 5: d = −2, −1, 0, 1, 2, Σd = 0, Σd² = 10. σ = 5 × √(10/5) = 5√2 ≈ 7.07.

  2. 2. Every value in a data set is increased by 10. What happens to the standard deviation?

    1. It increases by 10
    2. It is multiplied by 10
    3. It does not change
    4. It decreases by 10
    Show answer

    Answer: C. Adding the same number to every value shifts the data without changing the gaps between values, so the spread, and hence the standard deviation, stays the same. Only the mean increases by 10.

  3. 3. The standard deviation of a data set is 3. Each value is multiplied by 4. What is the new variance?

    1. 144
    2. 36
    3. 12
    4. 9
    Show answer

    Answer: A. The new standard deviation is 4 × 3 = 12, so the new variance is 12² = 144. (Equivalently the old variance 9 is multiplied by 4² = 16.)

  4. 4. What is the variance of the first 7 natural numbers?

    1. 7
    2. 2
    3. 4
    4. 16
    Show answer

    Answer: C. Variance = (n² − 1)/12 = (49 − 1)/12 = 48/12 = 4.

  5. 5. Using an assumed mean for 8 values, Σd = 8 and Σd² = 40. What is the standard deviation?

    1. 4
    2. √5
    3. 1
    4. 2
    Show answer

    Answer: D. σ = √[Σd²/n − (Σd/n)²] = √[40/8 − (8/8)²] = √(5 − 1) = √4 = 2.

Privacy · Terms · Refunds · Delivery