• Practice
  • About 16 min
  • 5 practice questions

Rate of reaction and chemical equilibrium

Define the rate of a reaction, explain how the nature of reactants, concentration, temperature, pressure, catalysts and surface area change it, and describe chemical and physical equilibrium and their features.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define the rate of a reaction and compare rates from data.
  • Explain six factors that change the rate of a reaction.
  • Describe how a reversible reaction reaches equilibrium.
  • List the characteristics of equilibrium and give a physical example.

Petrol burns in a fraction of a second, food is digested over hours, iron rusts over weeks and rocks weather over centuries. How fast a reaction goes matters a great deal: a factory wants a high yield quickly, while a food processor wants spoiling to be as slow as possible.

Rate of a reaction

Rate of a reaction = change in the amount or concentration of a reactant or product per unit time. For A → B, rate = −d[A]/dt = +d[B]/dt.

Square brackets [ ] mean concentration. The minus sign shows that the reactant's concentration falls with time; the plus sign shows that the product's rises.

Worked example 1: comparing two rates (made-up data)

Question: In reaction P, 60 g of a reactant falls to 45 g in 5 minutes. In reaction Q, 60 g falls to 20 g in 10 minutes. Which is faster on average?

Working: P uses 60 − 45 = 15 g in 5 min, so 15 ÷ 5 = 3 g/min. Q uses 60 − 20 = 40 g in 10 min, so 40 ÷ 10 = 4 g/min. Q is faster. Always compare the amount used per unit time, not just the total amount used.

Factors that affect the rate

FactorEffectEveryday or laboratory example
Nature of the reactantsMore reactive substances react fasterSodium reacts faster with hydrochloric acid (strong) than with acetic acid (weak)
ConcentrationMore particles per volume means more collisions, so a faster reactionZinc reacts faster with 2 M HCl than with 1 M HCl
TemperatureHigher temperature gives particles more energy to break bondsFood spoils faster at room temperature than in a refrigerator
Pressure (gases)Particles are pushed closer and collide more oftenIndustrial gas reactions are run at high pressure
CatalystSpeeds up a reaction without itself being used upManganese dioxide speeds up the decomposition of potassium chlorate
Surface areaPowders expose more surface to collisionsPowdered calcium carbonate reacts faster with acid than marble chips

Worked example 2: choosing conditions

Question: A student wants carbon dioxide to form as fast as possible from calcium carbonate and hydrochloric acid. What three changes would help?

Working: Use powdered calcium carbonate instead of chips (larger surface area), use more concentrated acid (more particles per volume), and warm the mixture gently (higher temperature). Each increases the number of effective collisions per second.

Chemical equilibrium

In a reversible reaction in a closed vessel, the forward reaction is fast at first because the reactant concentration is high, and the backward reaction is slow because there is little product. As reactants are used up the forward rate falls; as products build up the backward rate rises. Eventually the two rates become equal. From then on the amounts of reactants and products stay constant. This is chemical equilibrium.

How equilibrium is reached

  1. Start: only reactants Forward rate high, backward rate zero
  2. Reactants used, products form Forward rate falls, backward rate rises
  3. Rates become equal Forward rate = backward rate
  4. Equilibrium Amounts stay constant, but both reactions continue

Example: heating calcium carbonate in a closed vessel, CaCO₃(s) ⇌ CaO(s) + CO₂(g). At equilibrium, CaCO₃ decomposes as fast as CaO and CO₂ recombine. (In an open container the CO₂ escapes and no equilibrium is reached.)

Physical equilibrium

Equilibrium also occurs in physical changes. Water in a closed bottle evaporates, and the vapour gradually builds up and begins to condense. When the rate of condensation equals the rate of evaporation, H₂O(l) ⇌ H₂O(g) is at physical equilibrium: the volumes of liquid and vapour stay constant. A sealed soft drink is another example: dissolved carbon dioxide is in equilibrium with the gas above it. Open the bottle and the gas escapes, more CO₂ comes out of solution, and the drink goes flat.

  • At equilibrium the rates of the forward and backward reactions are equal.
  • Measurable properties such as pressure, concentration, colour and density stay constant.
  • The equilibrium is dynamic: both reactions continue even though nothing seems to change.
  • In physical equilibrium the volume of each phase stays constant.

Key takeaways: rate is the change in amount or concentration per unit time. It increases with more reactive substances, higher concentration, higher temperature, higher pressure (for gases), a catalyst and a larger surface area. A reversible reaction in a closed system reaches a dynamic equilibrium where forward and backward rates are equal.

Check your understanding

  1. 1. Why does milk kept in a refrigerator stay fresh longer?

    1. The refrigerator adds a catalyst
    2. The lower temperature slows down the reactions that spoil it
    3. Cold increases the surface area of the milk
    4. There is no air in a refrigerator
    Show answer

    Answer: B. Reaction rates fall at lower temperature because particles have less energy, so spoiling reactions go more slowly.

  2. 2. Equal masses of marble chips and powdered marble are added to the same acid. Why does the powder react faster?

    1. Powder is a different substance
    2. Powder is heavier
    3. Powder has a larger surface area for collisions
    4. Powder acts as a catalyst
    Show answer

    Answer: C. Powdering exposes much more surface to the acid particles, so more collisions happen each second and the reaction is faster.

  3. 3. A catalyst is a substance that:

    1. Increases the rate of a reaction without being used up
    2. Is completely consumed in the reaction
    3. Always slows a reaction down
    4. Changes the products of a reaction
    Show answer

    Answer: A. A catalyst speeds up a reaction and is left unchanged at the end, as manganese dioxide is in the decomposition of potassium chlorate.

  4. 4. At chemical equilibrium:

    1. Both reactions stop
    2. Only the forward reaction continues
    3. The amount of product keeps increasing
    4. Forward and backward rates are equal and both reactions continue
    Show answer

    Answer: D. Equilibrium is dynamic: both reactions go on at the same rate, so the amounts of reactants and products stay constant.

  5. 5. Made-up data: a product's mass rises from 0 g to 18 g in 6 minutes. What is the average rate of formation?

    1. 3 g/min
    2. 6 g/min
    3. 18 g/min
    4. 108 g/min
    Show answer

    Answer: A. Rate = change in amount ÷ time = (18 − 0) ÷ 6 = 3 g/min.

Sign in to keep track of the lessons you finish.

Next lesson → Ionic product of water, pH and pOH

Privacy · Terms · Refunds · Delivery