• Practice
  • About 15 min
  • 5 practice questions

Soaps and detergents

Describe how soap is made by the kettle process, explain the cleansing action of soap through micelles, explain why soap fails in hard water, and compare detergents with soaps.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define soap and tell hard soap from soft soap.
  • Describe saponification and salting out in the kettle process.
  • Explain cleansing action with hydrophilic heads, hydrophobic tails and micelles.
  • Explain why soap forms scum in hard water and compare soaps with detergents.

Water alone cannot wash away oily dirt, because oil and water do not mix. Soaps and detergents contain surfactants, substances whose molecules gather at the surface of water, lower its surface tension, and link oil to water so that the dirt can be rinsed off.

What soap is

Soaps are the sodium or potassium salts of long-chain carboxylic acids called fatty acids. They are made from two raw materials: a fat or oil and an alkali. Using sodium hydroxide gives hard soap, used for washing clothes; using potassium hydroxide gives soft soap, which is more soluble in water and is used for bathing.

The kettle process

Making soap by the kettle process

  1. Oil + 10% alkali in an iron kettle Alkali taken in slight excess
  2. Boil with steam for several hours The oil is hydrolysed: saponification
  3. Add common salt Salting out: soap becomes less soluble
  4. Soap rises as a curdy mass Neat soap skimmed off and cooled

Saponification: fat or oil + sodium hydroxide → soap (sodium salt of fatty acid) + glycerol.

How soap cleans

A soap molecule has two different ends. The short head is the ionic carboxylate group (-COO⁻Na⁺); it is polar and hydrophilic (water-loving). The long tail is a hydrocarbon chain; it is non-polar and hydrophobic (water-hating) but dissolves in oil and grease.

Cleansing action of soap

  1. Soap dissolves in water Heads face the water
  2. Tails dig into the oily dirt Like dissolves like
  3. Micelles form Clusters with dirt trapped inside, heads outside
  4. Micelles stay suspended Charged heads keep them in the water
  5. Rinsing carries dirt away The cloth is left clean

Worked example 1: explaining a micelle

Question: In a micelle, which part of each soap molecule points inwards and which outwards? Why?

Working: The hydrophobic hydrocarbon tails point inwards, into the oil droplet, because they dissolve in oil and avoid water. The hydrophilic ionic heads point outwards, into the water, because they are attracted to water. So the oil is wrapped in a coat of charged heads, which keeps it dispersed in the water until it is rinsed away.

Soap and hard water

Hard water contains calcium (Ca²⁺) and magnesium (Mg²⁺) ions. These react with soap to form insoluble calcium and magnesium salts of the fatty acids, which appear as a sticky grey scum. Much soap is wasted before any lather forms, and the scum sticks to clothes and skin and slowly damages fabric.

Detergents

Synthetic detergents are sodium salts of sulphonic acids or alkyl hydrogen sulphates, rather than of carboxylic acids. They are made by treating hydrocarbons from petroleum with sulphuric acid and then with an alkali. Their calcium and magnesium salts are soluble, so they do not form scum and work well in hard water and even in acidic water.

  • Sodium silicate: prevents corrosion, protecting the washing machine.
  • Fluorescent whitening agents: make clothes look brighter.
  • Oxygen bleaches such as sodium perborate: remove some stains.
  • Sodium sulphate: stops the powder caking.
  • Enzymes: break down biological stains such as blood and vegetable juice.
  • Perfumes: give a pleasant smell.

Soaps versus detergents

  • Soap
    • Sodium or potassium salt of a fatty (carboxylic) acid
    • Made from fats or oils
    • Forms scum in hard water
    • Does not work well in acidic water
    • Biodegradable
  • Detergent
    • Sodium salt of a sulphonic acid or alkyl hydrogen sulphate
    • Made from petroleum hydrocarbons
    • No scum: works in hard and saline water
    • Works in acidic water
    • Branched-chain types are not biodegradable

Detergents with straight (linear) hydrocarbon chains are biodegradable: bacteria break them down. Those with highly branched chains are non-biodegradable; they persist in rivers and lakes, causing foam and water pollution. Detergents are also generally more expensive than soap.

Worked example 2: choosing a cleaner

Question: A family's well water is hard. Which should they use for washing clothes, soap or a detergent, and what kind of detergent is kindest to the environment?

Working: Soap would react with the Ca²⁺ and Mg²⁺ ions and form scum, so a detergent is better because its calcium and magnesium salts are soluble. A detergent with linear hydrocarbon chains should be chosen because it is biodegradable.

Key takeaways: soaps are sodium or potassium salts of fatty acids, made by saponification and salting out. The hydrophobic tail grips oil, the hydrophilic head holds water, and micelles carry dirt away. Hard water turns soap into scum; detergents avoid this, but branched-chain detergents pollute because bacteria cannot break them down.

Check your understanding

  1. 1. Soaps are:

    1. Sodium salts of sulphonic acids
    2. Esters of glycerol
    3. Sodium or potassium salts of long-chain fatty acids
    4. Hydrocarbons from petroleum
    Show answer

    Answer: C. Soaps are salts of long-chain carboxylic (fatty) acids with sodium or potassium. Sulphonic acid salts are detergents.

  2. 2. Why is common salt added during the kettle process?

    1. To hydrolyse the oil
    2. To make the soap separate out (salting out)
    3. To add a fragrance
    4. To make the soap soft
    Show answer

    Answer: B. Salt reduces the solubility of soap, so it separates and rises as a curdy mass that can be skimmed off. Hydrolysis of the oil (saponification) is done by the alkali.

  3. 3. Which part of a soap molecule is attracted to oil and grease?

    1. The long hydrocarbon tail
    2. The ionic carboxylate head
    3. The sodium ion
    4. The water around it
    Show answer

    Answer: A. The non-polar hydrocarbon tail is hydrophobic and dissolves in oil and grease. The ionic head is hydrophilic and faces the water.

  4. 4. Soap forms scum in hard water because of the presence of:

    1. Sodium and potassium ions
    2. Chloride ions
    3. Dissolved oxygen
    4. Calcium and magnesium ions
    Show answer

    Answer: D. Ca²⁺ and Mg²⁺ ions react with soap to form insoluble calcium and magnesium salts, which separate as scum.

  5. 5. Which detergents cause water pollution because bacteria cannot break them down?

    1. Those with straight hydrocarbon chains
    2. Those with highly branched hydrocarbon chains
    3. All soaps
    4. Those containing enzymes
    Show answer

    Answer: B. Bacteria can break down linear chains, so those detergents are biodegradable. Highly branched chains resist breakdown and persist in water.

Privacy · Terms · Refunds · Delivery