- Practice
- About 16 min
- 5 practice questions
Convex and concave lenses: rays and images
Name the types of lenses, use the three rules for rays through a lens, and describe the position, size and nature of the image for every object position with a convex and a concave lens.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe convex, concave, plano-convex and plano-concave lenses.
- Use the three rules to draw rays through a lens.
- Predict the image formed by a convex lens for six object positions.
- Describe the image formed by a concave lens and list uses of both lenses.
Spectacles, cameras, magnifying glasses and projectors all depend on lenses. Once you know three simple rules for rays, you can predict where the image will be, how big it is and whether it can be caught on a screen.
Types of lenses
A lens is a transparent medium bounded by two spherical refracting surfaces, or by one plane and one spherical surface.
| Convex (bi-convex) lens | Concave (bi-concave) lens |
|---|---|
| Thicker at the centre than at the edges | Thinner at the centre than at the edges |
| Converges a parallel beam to a point: converging lens | Spreads a parallel beam out: diverging lens |
| Forms mostly real images | Forms only virtual images |
| Corrects hypermetropia | Corrects myopia |
| With one face plane: plano-convex lens | With one face plane: plano-concave lens |
Words used in ray diagrams: the optical centre O is the centre of the lens; the principal axis passes through O; the principal focus F is where rays parallel to the axis meet (convex) or seem to come from (concave); C, at twice the focal length (2F), is the centre of curvature in the textbook's diagrams.
Three rules for rays
- A ray through the optical centre goes straight on without deviation, for both lenses.
- A ray parallel to the principal axis is refracted through the principal focus (convex) or appears to come from the principal focus (concave).
- A ray through the principal focus (convex) or directed towards it (concave) comes out parallel to the principal axis.
Any two of these rays from the top of an object are enough: where they meet (or appear to meet) is the top of the image.
Images formed by a convex lens
| Object position | Image position | Size | Nature |
|---|---|---|---|
| At infinity | At the principal focus F | Much smaller (point-sized) | Real, inverted |
| Beyond C (beyond 2F) | Between F and C on the other side | Smaller | Real, inverted |
| At C (2F) | At C on the other side | Same size | Real, inverted |
| Between F and C | Beyond C on the other side | Larger | Real, inverted |
| At F | At infinity | Much larger | Real, inverted |
| Between F and O | On the same side as the object | Larger | Virtual, erect |
Worked example 1: choosing the object position
Question: A convex lens has focal length 10 cm. Where should an object be placed to get (a) a real image of the same size, (b) an enlarged image you can read through, as with a magnifying glass?
Working: (a) Same-size real image needs the object at C = 2F = 20 cm from the lens; the image forms 20 cm on the other side. (b) An enlarged, erect, virtual image needs the object between F and O, that is, less than 10 cm from the lens.
Worked example 2: a slide projector
Question: A projector must throw a large, real image of a small slide onto a far screen. Where is the slide placed relative to the convex lens, and why is it put in upside down?
Working: the slide sits between F and C (just beyond F). The image then forms beyond C, real and much larger. Because that image is inverted, the slide is put in upside down so the picture on the screen is the right way up.
Images formed by a concave lens
- Object at infinity: a virtual, erect image at the focus F, much smaller than the object.
- Object at any finite distance: a virtual, erect, diminished image between the optical centre and F, on the same side as the object.
- As the object comes closer to the lens, the image also moves closer to the lens and grows larger, but it always stays smaller than the object.
Uses of the two lenses
-
Convex lens
- Camera lenses
- Magnifying glasses
- Microscopes, telescopes, slide projectors
- Correcting hypermetropia
-
Concave lens
- Eyepiece of a Galilean telescope
- Wide-angle spy holes in doors
- Correcting myopia
Convex: object beyond F gives a real, inverted image; object inside F gives a virtual, erect, enlarged image. Concave: always virtual, erect and diminished, between O and F.
Key takeaways: three rays are enough to draw any image. A convex lens can give real or virtual images depending on where the object is; a concave lens always gives a small, upright, virtual image.
Check your understanding
-
1. Where should an object be placed in front of a convex lens to get a real, inverted image of the same size?
- At F
- Between F and O
- At C (2F)
- At infinity
Show answer
Answer: C. An object at C (2F) forms a real, inverted, same-size image at C on the other side of the lens.
-
2. The image formed by a concave lens of an object at a finite distance is always
- virtual, erect and diminished
- real, inverted and enlarged
- real, erect and same size
- virtual, inverted and enlarged
Show answer
Answer: A. A concave lens diverges light, so the image is always virtual and erect, smaller than the object, between O and F.
-
3. A magnifying glass is a convex lens used with the object
- at 2F
- beyond 2F
- at F
- between F and the optical centre
Show answer
Answer: D. Only with the object inside the focal length does a convex lens give a virtual, erect, enlarged image, which is what a magnifier needs.
-
4. A ray of light passes through the optical centre of a lens. After the lens it
- passes through the focus
- goes on without deviation
- becomes parallel to the axis
- is reflected back
Show answer
Answer: B. Rule 1: a ray through the optical centre is not deviated, for both convex and concave lenses.
-
5. An object is placed between F and C of a convex lens. The image is
- virtual and erect, on the same side
- real, inverted and smaller, between F and C
- real, inverted and larger, beyond C
- at infinity
Show answer
Answer: C. Between F and C, the image forms beyond C on the other side, real, inverted and enlarged. This is the projector position.
Sign in to keep track of the lessons you finish.