- Practice
- About 13 min
- 5 practice questions
Energy resources: fossil fuels and how to conserve them
Classify energy resources as non-renewable or renewable, explain how fossil fuels form and are used, list ways to save coal and petroleum, and describe shale gas and its environmental concerns.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify energy resources as non-renewable (exhaustible) or renewable (inexhaustible).
- Explain how fossil fuels form and how coal and petroleum are used.
- Suggest practical ways to conserve coal and petroleum.
- Explain the Taj Mahal case study and the concerns about shale gas.
Energy drives farms, factories and homes. The faster a country develops, the more energy it needs, so the kind of energy we choose matters for both the economy and the environment.
Two kinds of energy resources
| Feature | Non-renewable (exhaustible) | Renewable (inexhaustible) |
|---|---|---|
| Renewal | Cannot renew themselves in a short time | Renewed over a short time |
| Amount | Limited in nature | Practically unlimited |
| Also called | Conventional sources | Non-conventional sources |
| Examples | Coal, petroleum, natural gas, nuclear fuel | Solar, wind, hydroelectric, tidal, wave, geothermal, biomass, biofuel |
Fossil fuels
Fossil fuels are energy-rich substances in the earth's crust formed from buried dead organisms by anaerobic decomposition (without oxygen) over millions of years. As sediment layers pile up, heat and pressure slowly change the remains into hydrocarbons: coal, petroleum and natural gas. Because they form so slowly, they cannot be replaced once used.
How fossil fuels form
- Organisms die Plants and animals of long ago
- Buried under sediment Little or no oxygen
- Heat and pressure Over millions of years
- Hydrocarbons Coal, petroleum, natural gas
Coal is burnt in thermal power plants to generate electricity. Petroleum (crude oil) is refined in oil refineries to give petrol and diesel for vehicles, trains, ships and aircraft, and kerosene and LPG (liquefied petroleum gas) for cooking.
Conserving coal and petroleum
- Save electricity: much of it comes from burning coal, so every unit saved saves coal.
- Cycle or walk for short distances instead of using a car, scooter or motorcycle.
- Use a pressure cooker to save kerosene and LPG; use solar cookers and solar heaters where possible.
- Design vehicles with fuel-efficient engines, which also reduce air pollution.
Worked example 1: fuel saved by cycling (made-up data)
Question: Kumar rides a scooter 6 km to school and back each day (12 km a day). His scooter runs 48 km on one litre of petrol. How much petrol does he save in 20 school days by cycling instead? Working: distance in 20 days = 12 × 20 = 240 km. Petrol needed = 240 ÷ 48 = 5 litres. Cycling saves 5 litres of petrol, along with the exhaust gases it would have produced.
Case study: the Taj Mahal
The Taj Mahal in Agra is built of white marble. The textbook explains that sulphur and nitrogen oxides from the oil refinery at Mathura, in the same region, polluted the air, and the marble began to turn yellow. The Government of India set emission standards around the monument to protect it. Sulphur and nitrogen oxides also form acids with moisture in the air, and acid slowly attacks marble, which is a form of calcium carbonate.
Shale gas
Shale is a soft, finely layered sedimentary rock formed by compaction of mud and minerals such as quartz and calcite. Oil and gas are trapped in its pores. The gas is extracted by hydraulic fracturing: drilling into the rock layers to reach the productive layers and releasing the gas using large volumes of water. Environmental concerns: drilling can contaminate groundwater and drinking water and affect soil fertility, and the millions of gallons of water used can lower the water table. Shale gas is still a fossil fuel.
Worked example 2: is it renewable?
Question: A newspaper calls shale gas 'a new clean energy source'. Is shale gas renewable? Reasoning: shale gas is natural gas trapped in rock; like other fossil fuels it formed over millions of years and is used up as it is extracted. So it is non-renewable. It is 'new' only in the sense of a newer extraction technique, and it has its own water and pollution problems.
Fossil fuels = buried organisms + anaerobic decomposition + heat and pressure over millions of years → hydrocarbons. Save coal by saving electricity; save petroleum by cycling, pressure cookers and efficient engines.
Key takeaways: coal, petroleum and natural gas are non-renewable and polluting. Their use can be cut by saving electricity and fuel and switching to solar devices. Shale gas is a fossil fuel whose extraction threatens groundwater.
Check your understanding
-
1. Fossil fuels are formed by:
- Aerobic decomposition of living plants in a few years
- Burning of forests
- Anaerobic decomposition of buried dead organisms over millions of years
- Evaporation of sea water
Show answer
Answer: C. Buried remains, cut off from oxygen, are slowly changed into hydrocarbons by heat and pressure over millions of years.
-
2. Which of these is a renewable energy resource?
- Coal
- Natural gas
- Shale gas
- Tidal energy
Show answer
Answer: D. Tides are produced again and again by gravitational forces, so tidal energy is renewable. Coal, natural gas and shale gas are fossil fuels.
-
3. According to the textbook, the marble of the Taj Mahal turned yellow because of:
- Sulphur and nitrogen oxides from a nearby oil refinery
- Too much rainfall
- Soil erosion
- Biogas plants
Show answer
Answer: A. Sulphur and nitrogen oxides from the Mathura refinery polluted the air around Agra; emission standards were set to protect the monument.
-
4. A scooter runs 50 km on a litre of petrol. A student who cycles instead of riding 10 km a day for 30 days saves how much petrol?
- 3 litres
- 6 litres
- 15 litres
- 60 litres
Show answer
Answer: B. Distance = 10 × 30 = 300 km. Petrol = 300 ÷ 50 = 6 litres.
-
5. One environmental concern about shale gas extraction is that it:
- Increases forest cover
- Produces no waste at all
- Can contaminate groundwater and lower the water table
- Uses no water
Show answer
Answer: C. Hydraulic fracturing can contaminate groundwater and uses millions of gallons of water, which can lower the water table.
Sign in to keep track of the lessons you finish.