Revision notes

Unit 3 Thermal Physics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Temperature, the kelvin scale and thermal equilibrium

Converting between scales (the textbook rounds 273.15 to 273)
ConversionFormula
Celsius to kelvinK = °C + 273
Kelvin to Celsius°C = K − 273
Fahrenheit to kelvinK = (°F + 460) × 5/9 (more exactly, 459.67 instead of 460)
Absolute zero0 K = −273 °C

Reaching thermal equilibrium

  1. Hot and cold bodies touch
  2. Heat flows from hot to cold
  3. Hot body cools, cold body warms
  4. Temperatures become equal No net heat flow: thermal equilibrium

Temperature decides the direction of heat flow. K = °C + 273; 0 K = −273 °C; a change of 1 °C = a change of 1 K. Same temperature = thermal equilibrium.

Key takeaways: temperature measures hotness and sets the direction of heat flow. The kelvin scale starts at absolute zero, and its degree is the same size as a Celsius degree. Bodies in contact exchange heat until their temperatures are equal.

Read the full lesson

Lesson 2

Thermal energy, units of heat and the effects of heating

Heat supplied to a substance

  • Temperature rises
    • Rise depends on heat supplied, mass and nature of the substance
  • State may change
    • Solid to liquid
    • Liquid to gas
  • Substance expands
    • Solids, liquids and gases all expand

Heat flows from higher to lower temperature. Heat gained = heat lost. 1 calorie warms 1 g of water by 1 °C; 1 kcal warms 1 kg of water by 1 °C.

Key takeaways: heat is energy in transit because of a temperature difference; temperature is how hot a body is. Heating never changes mass. For water, heat in calories is simply grams × degrees.

Read the full lesson

Lesson 3

Thermal expansion of solids: linear, superficial and cubical

Expansion of solids (ΔT = final temperature − initial temperature)
KindWhat changesEquationCoefficient (unit K⁻¹)
Linear (longitudinal)LengthΔL/L₀ = α_L ΔTα_L: increase in length per unit length per degree rise
Superficial (areal)AreaΔA/A₀ = α_A ΔTα_A: increase in area per unit area per degree rise
Cubical (volumetric)VolumeΔV/V₀ = α_V ΔTα_V: increase in volume per unit volume per degree rise

One equation, three dimensions

  • Linear
    • Thin rods, wires, rails
    • ΔL = α_L L₀ ΔT
  • Superficial
    • Sheets and plates
    • ΔA = α_A A₀ ΔT
  • Cubical
    • Blocks and balls
    • ΔV = α_V V₀ ΔT
Coefficient of cubical expansion of some materials (values as given in the Tamil Nadu textbook)
Materialα_V (K⁻¹)
Aluminium7 × 10⁻⁵
Brass6 × 10⁻⁵
Glass2.5 × 10⁻⁵
Water20.7 × 10⁻⁵
Mercury18.2 × 10⁻⁵

ΔL = α_L L₀ ΔT; ΔA = α_A A₀ ΔT; ΔV = α_V V₀ ΔT. All three coefficients are measured in K⁻¹.

Key takeaways: solids expand because their atoms vibrate more. The fractional change in length, area or volume equals the coefficient times the temperature rise. Keep units consistent: metres with metres, kelvin (or °C differences) for ΔT.

Read the full lesson

Lesson 4

Expansion of liquids and gases: real and apparent expansion

What happens to the level

  1. Mark the starting level L₁
  2. Container heats first and expands Level falls to L₂
  3. Liquid heats and expands Level rises to L₃
  4. Apparent = L₃ − L₁; Real = L₃ − L₂

Apparent expansion = L₃ − L₁. Real expansion = L₃ − L₂. Container's expansion = L₁ − L₂. Real is always more than apparent.

Key takeaways: gases expand most and solids least. In a container, the liquid's level dips first because the container expands first. Apparent expansion (L₃ − L₁) is what you see; real expansion (L₃ − L₂) is larger by the container's own expansion.

Read the full lesson

Lesson 5

Gas laws, real and ideal gases, and the ideal gas equation

Gas laws (for a fixed amount of gas unless stated)
LawKept constantStatementEquation
Boyle's lawTemperatureVolume is inversely proportional to pressureP ∝ 1/V, PV = constant, P₁V₁ = P₂V₂
Charles's law (law of volume)PressureVolume is directly proportional to temperature (in kelvin)V ∝ T, V/T = constant, V₁/T₁ = V₂/T₂
Avogadro's lawPressure and temperatureVolume is directly proportional to the number of atoms or moleculesV ∝ n, V/n = constant

Real gas and ideal gas

  • Real gas
    • Molecules attract each other with definite forces
    • All actual gases are real gases
    • Behaves almost ideally at high temperature or low pressure
  • Ideal (perfect) gas
    • Molecules do not interact
    • Obeys Boyle's, Charles's and Avogadro's laws exactly
    • A model, not found in practice

Boyle: PV = constant (T fixed). Charles: V/T = constant (P fixed, T in kelvin). Avogadro: V/n = constant. Ideal gas: PV = µRT, R = 8.31 J mol⁻¹ K⁻¹, k_B = 1.38 × 10⁻²³ J K⁻¹.

Key takeaways: each gas law holds two quantities fixed and links the other two. Always use kelvin in gas calculations. The three laws combine into PV = µRT, which real gases obey closely at low pressure and high temperature.

Read the full lesson

Privacy · Terms · Refunds · Delivery