• Practice
  • About 15 min
  • 5 practice questions

Thermal expansion of solids: linear, superficial and cubical

Explain why solids expand on heating, and calculate linear, superficial (areal) and cubical expansion with ΔL/L₀ = α_L ΔT, ΔA/A₀ = α_A ΔT and ΔV/V₀ = α_V ΔT.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain thermal expansion in terms of atoms vibrating more.
  • Define the coefficients of linear, superficial and cubical expansion and give their unit.
  • Calculate the change in length, area or volume of a heated solid.
  • Find a coefficient of expansion from measurements.

Railway rails, bridges and electric wires are laid with heat in mind: they lengthen on hot afternoons and shorten on cool nights. The mercury rising in a thermometer in warm water is the same effect in a liquid.

Why solids expand

The increase in the size of a body when its temperature rises is thermal expansion. All three states of matter expand on heating. In a solid, heated atoms gain energy and vibrate more vigorously, pushing slightly further apart. For the same rise in temperature, solids expand less than liquids and gases, because they are rigid.

Three kinds of expansion of a solid

Expansion of solids (ΔT = final temperature − initial temperature)
KindWhat changesEquationCoefficient (unit K⁻¹)
Linear (longitudinal)LengthΔL/L₀ = α_L ΔTα_L: increase in length per unit length per degree rise
Superficial (areal)AreaΔA/A₀ = α_A ΔTα_A: increase in area per unit area per degree rise
Cubical (volumetric)VolumeΔV/V₀ = α_V ΔTα_V: increase in volume per unit volume per degree rise

Here ΔL, ΔA, ΔV are the changes (final − original), and L₀, A₀, V₀ are the original values. Each coefficient is different for different materials. Because a rise of 1 °C equals a rise of 1 K, ΔT can be worked out in either scale.

One equation, three dimensions

  • Linear
    • Thin rods, wires, rails
    • ΔL = α_L L₀ ΔT
  • Superficial
    • Sheets and plates
    • ΔA = α_A A₀ ΔT
  • Cubical
    • Blocks and balls
    • ΔV = α_V V₀ ΔT

Worked example 1: a steel rail

Question: A steel rail is 10 m long. By how much does it lengthen when its temperature rises by 30 K? Take α_L for steel as 1.2 × 10⁻⁵ K⁻¹.

Working: ΔL = α_L × L₀ × ΔT = 1.2 × 10⁻⁵ × 10 × 30 = 3.6 × 10⁻³ m = 3.6 mm. This is why small gaps are left between rail sections.

Worked example 2: a metal plate

Question: A metal plate of area 0.5 m² is heated through 50 K. Its coefficient of superficial expansion is 4 × 10⁻⁵ K⁻¹. Find the increase in area.

Working: ΔA = α_A × A₀ × ΔT = 4 × 10⁻⁵ × 0.5 × 50 = 1 × 10⁻³ m² (that is, 10 cm²).

Worked example 3: an aluminium block

Question: An aluminium block of volume 2 × 10⁻³ m³ is heated by 100 K. Using the textbook's value α_V = 7 × 10⁻⁵ K⁻¹ for aluminium, find the increase in volume.

Working: ΔV = α_V × V₀ × ΔT = 7 × 10⁻⁵ × 2 × 10⁻³ × 100 = 1.4 × 10⁻⁵ m³ = 14 cm³ (since 1 m³ = 10⁶ cm³).

Worked example 4: finding the coefficient

Question: A rod 2 m long grows by 1.6 mm when heated by 40 K. Find α_L.

Working: α_L = ΔL ÷ (L₀ × ΔT) = 0.0016 m ÷ (2 m × 40 K) = 0.0016 ÷ 80 = 2 × 10⁻⁵ K⁻¹. Convert millimetres to metres first, so the units cancel.

Coefficient of cubical expansion of some materials (values as given in the Tamil Nadu textbook)
Materialα_V (K⁻¹)
Aluminium7 × 10⁻⁵
Brass6 × 10⁻⁵
Glass2.5 × 10⁻⁵
Water20.7 × 10⁻⁵
Mercury18.2 × 10⁻⁵

ΔL = α_L L₀ ΔT; ΔA = α_A A₀ ΔT; ΔV = α_V V₀ ΔT. All three coefficients are measured in K⁻¹.

Key takeaways: solids expand because their atoms vibrate more. The fractional change in length, area or volume equals the coefficient times the temperature rise. Keep units consistent: metres with metres, kelvin (or °C differences) for ΔT.

Check your understanding

  1. 1. When a long thin wire is heated, the expansion that matters most is

    1. linear expansion
    2. superficial expansion
    3. cubical expansion
    4. apparent expansion
    Show answer

    Answer: A. For a long thin wire or rod, the noticeable change is in length: linear (longitudinal) expansion.

  2. 2. A 5 m rod with α_L = 2 × 10⁻⁵ K⁻¹ is heated by 20 K. Its increase in length is

    1. 0.2 mm
    2. 20 mm
    3. 2 mm
    4. 200 mm
    Show answer

    Answer: C. ΔL = 2 × 10⁻⁵ × 5 × 20 = 2 × 10⁻³ m = 2 mm.

  3. 3. The SI unit of the coefficient of linear expansion is

    1. m K
    2. m
    3. K
    4. K⁻¹
    Show answer

    Answer: D. α_L = ΔL/(L₀ ΔT). The lengths cancel, leaving 1/K, that is K⁻¹. The same unit applies to areal and cubical coefficients.

  4. 4. For the same rise in temperature, solids expand less than liquids and gases because

    1. solids have no atoms
    2. solids are rigid, with their particles held strongly in place
    3. solids cannot absorb heat
    4. solids always have less mass
    Show answer

    Answer: B. The strong forces holding the particles of a solid in place keep the expansion small. Solids do absorb heat and do expand, just less.

  5. 5. A brass block of volume 1 × 10⁻³ m³ is heated by 50 K. Using α_V = 6 × 10⁻⁵ K⁻¹, its increase in volume is

    1. 3 × 10⁻⁴ m³
    2. 1.2 × 10⁻⁶ m³
    3. 3 × 10⁻⁶ m³
    4. 6 × 10⁻⁵ m³
    Show answer

    Answer: C. ΔV = 6 × 10⁻⁵ × 1 × 10⁻³ × 50 = 300 × 10⁻⁸ = 3 × 10⁻⁶ m³ (3 cm³).

Privacy · Terms · Refunds · Delivery