• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Acoustics

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before checking. Remember that echo problems use the total path 2d, and in Doppler problems the listener's speed goes on top and the source's speed below.

Final self-assessment

  1. 1. Sound of frequency 1.7 × 10⁴ Hz travels at 340 m s⁻¹. Its wavelength is

    1. 0.2 m
    2. 0.02 m
    3. 50 m
    4. 5.78 × 10⁶ m
    Show answer

    Answer: B. λ = v/n = 340 ÷ 17 000 = 0.02 m (2 cm).

  2. 2. Which statement is true of sound but not of light?

    1. It travels at 3 × 10⁸ m s⁻¹ in air
    2. It can travel through a vacuum
    3. It is a transverse wave
    4. It is a longitudinal wave that needs a medium
    Show answer

    Answer: D. Sound is longitudinal and needs a material medium. Light is transverse, travels through vacuum and moves at 3 × 10⁸ m s⁻¹.

  3. 3. Bats navigate using sound waves of frequency

    1. above 20 kHz (ultrasonic)
    2. below 20 Hz (infrasonic)
    3. exactly 20 Hz
    4. between 20 Hz and 200 Hz
    Show answer

    Answer: A. Bats produce and hear ultrasonic waves, above 20 kHz, which humans cannot hear.

  4. 4. Using v_t = v₀ + 0.61t, at what temperature is the speed of sound in air 6.1 m s⁻¹ more than at 0 °C?

    1. 1 °C
    2. 61 °C
    3. 10 °C
    4. 100 °C
    Show answer

    Answer: C. 0.61t = 6.1, so t = 10 °C.

  5. 5. The pressure of a gas is doubled while its temperature is kept constant. The speed of sound in it

    1. does not change
    2. doubles
    3. becomes √2 times
    4. halves
    Show answer

    Answer: A. At constant temperature, density rises in the same proportion as pressure, and the two effects cancel. The speed depends on temperature, not on pressure alone.

  6. 6. Sound travels faster in iron than in air because iron is

    1. less dense
    2. a gas at high temperature
    3. more humid
    4. much more elastic
    Show answer

    Answer: D. Solids are far more elastic than gases, and elasticity raises the speed of sound. (Iron is actually much denser, which alone would slow sound.)

  7. 7. A compression travelling through a solid reaches a boundary with air. It is reflected as

    1. a compression
    2. a rarefaction
    3. an ultrasonic wave
    4. it is not reflected at all
    Show answer

    Answer: B. At a boundary with a rarer medium, the free surface gives way and the particles spread out, so a compression returns as a rarefaction.

  8. 8. A sound board in an auditorium works best when the speaker stands

    1. far behind the board
    2. at the edge of a convex board
    3. at the focus of a concave board
    4. facing the board
    Show answer

    Answer: C. The concave board reflects sound from its focus towards the audience, so the speaker stands at the focus.

  9. 9. When sound is reflected from a convex surface, the reflected waves

    1. spread out and the intensity decreases
    2. converge to a point
    3. keep the same intensity
    4. become louder
    Show answer

    Answer: A. A convex surface makes reflected waves diverge, so the sound energy spreads out and the intensity falls. A concave surface converges them.

  10. 10. In the echo method, the reflecting wall is 170 m away and the echo is timed at 1.0 s. The speed of sound is

    1. 170 m s⁻¹
    2. 85 m s⁻¹
    3. 680 m s⁻¹
    4. 340 m s⁻¹
    Show answer

    Answer: D. v = 2d/t = 2 × 170 ÷ 1.0 = 340 m s⁻¹.

  11. 11. A SONAR pulse returns from the sea bed after 3 s. Sound travels at 1520 m s⁻¹ in the water. The depth is

    1. 4560 m
    2. 2280 m
    3. 1013 m
    4. 507 m
    Show answer

    Answer: B. d = vt/2 = 1520 × 3 ÷ 2 = 4560 ÷ 2 = 2280 m.

  12. 12. Why must a reflecting surface be at least about 17.2 m away (v = 344 m s⁻¹) to hear an echo?

    1. Sound cannot travel farther than 34.4 m
    2. Shorter distances make the sound ultrasonic
    3. The sound must travel 34.4 m there and back, taking at least 0.1 s
    4. The surface must be rigid
    Show answer

    Answer: C. The echo must arrive at least 0.1 s later. In 0.1 s sound travels 344 × 0.1 = 34.4 m, which is the path there and back, so d = 17.2 m.

  13. 13. A source of 550 Hz moves away from a stationary listener at one-tenth of the speed of sound. The frequency heard is

    1. 500 Hz
    2. 605 Hz
    3. 611 Hz
    4. 495 Hz
    Show answer

    Answer: A. n′ = v/(v + v_S) × n = v/(1.1v) × 550 = 550 ÷ 1.1 = 500 Hz.

  14. 14. A car follows a truck along a straight road at the same speed, and the truck sounds its horn. The car driver hears

    1. a higher frequency
    2. a lower frequency
    3. no sound at all
    4. the actual frequency
    Show answer

    Answer: D. The distance between them stays the same, so there is no Doppler effect. With v_L = v_S the formula (v + v_L)/(v + v_S) gives n′ = n.

  15. 15. Wind blows at speed W from a source towards a listener. In the Doppler formula, the speed of sound v should be replaced by

    1. v − W
    2. v + W
    3. v × W
    4. v/W
    Show answer

    Answer: B. When the medium moves in the direction of the sound, the sound effectively travels faster: use v + W. Against the sound, use v − W.

Questions 1-3: lesson 1 (sound waves). Questions 4-6: lesson 2 (speed of sound). Questions 7-9: lesson 3 (reflection of sound). Questions 10-12: lesson 4 (echoes). Questions 13-15: lesson 5 (Doppler effect).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery