• Practice
  • About 16 min
  • 5 practice questions

Nuclear fission, chain reactions and critical mass

Define nuclear fission and balance a fission equation, tell fissile from fertile materials, explain controlled and uncontrolled chain reactions and critical mass, describe the atom bomb's principle, and use the electron volt and E = mc².

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define nuclear fission and balance a fission equation.
  • Tell fissile (fissionable) materials from fertile materials.
  • Explain controlled and uncontrolled chain reactions and critical mass.
  • Convert MeV to joules and use E = mc² to find the energy from a mass defect.

Splitting a single uranium nucleus releases about a hundred million times more energy than a typical chemical reaction between two atoms. Harnessed slowly it can generate electricity; released all at once it is an explosion.

Nuclear fission

In 1939, the German scientists Otto Hahn and F. Strassmann found that a uranium nucleus struck by a neutron breaks into two smaller nuclei of comparable mass, with a few neutrons and energy. Nuclear fission is the splitting of a heavy nucleus into two smaller nuclei with the release of a large amount of energy and a few neutrons. Example from the textbook:

²³⁵₉₂U + ¹₀n → ¹⁴¹₅₆Ba + ⁹²₃₆Kr + 3 ¹₀n + Q (energy). Check: 235 + 1 = 141 + 92 + 3 = 236; 92 = 56 + 36.

Each fission releases on average about 200 MeV, which is about 3.2 × 10⁻¹¹ J. The electron volt (eV) is the energy an electron gains when accelerated through a potential difference of 1 volt: 1 eV = 1.602 × 10⁻¹⁹ J, and 1 MeV = 10⁶ eV.

Worked example 1: MeV to joules

Question: Show that 200 MeV is about 3.2 × 10⁻¹¹ J. How many fissions per second would give a power of 1 W?

Working: 200 MeV = 200 × 10⁶ × 1.602 × 10⁻¹⁹ J = 320.4 × 10⁻¹³ ≈ 3.2 × 10⁻¹¹ J. For 1 W = 1 J s⁻¹: 1 ÷ 3.2 × 10⁻¹¹ ≈ 3.1 × 10¹⁰ fissions per second.

Fissile and fertile materials

  • Fissile (fissionable) material: undergoes fission in a sustained way when it absorbs a neutron. Examples: uranium-235, plutonium-239 and plutonium-241.
  • Natural uranium is about 99.28% uranium-238 and only 0.72% uranium-235 (the textbook's figures). U-238 does not undergo fission this way; U-235 does.
  • Fertile material: can be converted into fissile material. Examples: uranium-238, thorium-232, plutonium-240.

Chain reaction

If each fission gives 3 neutrons and each of them causes another fission, the neutrons go 1, 3, 9, 27 and so on, multiplying almost in a geometric progression. This self-propagating process is a chain reaction. A safe way to picture it: stand a row of dominoes so that each one falls onto two or three others.

Two kinds of chain reaction

  • Controlled
    • Extra neutrons absorbed by a neutron absorber
    • Only one neutron per fission causes the next fission
    • Steady energy output
    • Used in a nuclear reactor
  • Uncontrolled
    • Neutrons multiply without limit
    • Huge energy in a fraction of a second
    • An explosion
    • Principle of the atom bomb

Worked example 2: neutrons multiplying

Question: One neutron starts a chain in which every fission gives 3 neutrons, each causing a new fission. How many neutrons are produced in the 5th generation?

Working: generation n has 3ⁿ neutrons: 3⁵ = 3 × 3 × 3 × 3 × 3 = 243. After 10 generations it would be 3¹⁰ = 59 049: this explosive growth is why the chain must be controlled.

Critical mass and the atom bomb

Each fission releases about 2 to 3 neutrons, but some escape from the material (leakage) and some are absorbed by non-fissile material. The chain continues only if neutrons are produced faster than they are lost, which needs enough fissile material. The critical mass is the minimum mass of fissile material needed to sustain the chain reaction; it depends on the nature, density and size of the material. Less than this is subcritical; more is supercritical.

The atom bomb works on an uncontrolled chain reaction. Two pieces of fissile material, each subcritical, are kept apart; a conventional explosive drives them together into one supercritical mass, and the chain reaction runs away in a fraction of a second, releasing heat, light and harmful radiation such as gamma rays. Atom bombs were used on Hiroshima and Nagasaki in Japan in 1945, during the Second World War.

Mass defect and E = mc²

In fission and fusion, the total mass of the products is slightly less than the total mass of the reacting nuclei. This difference is the mass defect, and it appears as energy according to Einstein's mass-energy relation (1905): E = mc², with c = 3 × 10⁸ m s⁻¹.

Worked example 3: energy from 1 g of mass

Question: How much energy is released if 1 g of mass is converted completely into energy?

Working: m = 1 g = 10⁻³ kg. E = mc² = 10⁻³ × (3 × 10⁸)² = 10⁻³ × 9 × 10¹⁶ = 9 × 10¹³ J.

Key takeaways: a neutron splits U-235 into two middle-sized nuclei, a few neutrons and about 200 MeV. Above the critical mass the neutrons sustain a chain reaction, which a reactor controls and a bomb does not. The energy comes from the mass defect, E = mc².

Check your understanding

  1. 1. Which of these is a fissile (fissionable) material?

    1. Uranium-235
    2. Uranium-238
    3. Thorium-232
    4. Lead-206
    Show answer

    Answer: A. U-235 undergoes sustained fission when it absorbs a neutron. U-238 and Th-232 are fertile, not fissile; lead-206 is stable.

  2. 2. A material that can be converted into fissile material is called

    1. a moderator
    2. a coolant
    3. a fertile material
    4. a control rod
    Show answer

    Answer: C. Fertile materials such as U-238, Th-232 and Pu-240 can be changed into fissile material, for example in breeder reactors.

  3. 3. The critical mass of a fissile material is

    1. the largest mass that can be stored safely
    2. the mass of one uranium nucleus
    3. the mass lost in a fission
    4. the minimum mass needed to sustain a chain reaction
    Show answer

    Answer: D. Below the critical mass too many neutrons escape or are absorbed, so the chain reaction dies out.

  4. 4. If a mass of 2 g is converted completely into energy, the energy released is

    1. 6 × 10⁵ J
    2. 1.8 × 10¹⁴ J
    3. 1.8 × 10¹⁷ J
    4. 9 × 10¹³ J
    Show answer

    Answer: B. E = mc² = 2 × 10⁻³ × 9 × 10¹⁶ = 1.8 × 10¹⁴ J. Using 2 kg instead of 2 g would give 1.8 × 10¹⁷ J.

  5. 5. In a controlled chain reaction

    1. all the neutrons from each fission cause new fissions
    2. no neutrons are produced
    3. only one neutron from each fission goes on to cause another fission
    4. the reaction stops after one fission
    Show answer

    Answer: C. Extra neutrons are absorbed, so on average just one neutron per fission continues the chain, giving a steady release of energy.

Privacy · Terms · Refunds · Delivery