• Practice
  • About 18 min
  • 5 practice questions

Nerve impulse: resting potential, action potential and synaptic transmission

Explain how the resting membrane potential is maintained, describe depolarisation, repolarisation and hyperpolarisation, explain saltatory conduction, and trace transmission across a chemical synapse.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the ion distribution across the axolemma and the role of leak channels and the Na⁺–K⁺ pump.
  • Name the three kinds of ion channel in the axolemma.
  • Describe the phases of an action potential with their membrane voltages and the all-or-none principle.
  • Explain saltatory conduction and the events of synaptic transmission.

A nerve impulse is not a current of electrons flowing like electricity in a copper wire. It is a wave of brief changes in the voltage across the axon membrane, caused by ions moving in and out through protein channels. Understanding it starts with a neuron at rest.

Ions on either side of the membrane

The fluid inside the axon (intracellular fluid) is rich in K⁺ and negatively charged proteins and low in Na⁺. The fluid outside (extracellular fluid) is rich in Na⁺ and Cl⁻ and low in K⁺. Proteins of the axolemma act as ion channels:

ChannelOpens when
Leak channelsAlways open; K⁺ leak channels outnumber Na⁺ leak channels, so the resting membrane is more permeable to K⁺
Ligand-gated channelsA chemical, such as the neurotransmitter acetylcholine, binds; found mainly at synapses on dendrites and cell bodies
Voltage-gated channels (Na⁺ and K⁺)The membrane potential changes; they produce the action potential

Resting membrane potential

At rest, K⁺ leaks out more than Na⁺ leaks in, and the large negative proteins cannot leave, so the inside is negative compared with the outside. The Na⁺–K⁺ pump, driven by ATP, keeps the gradients by moving 3 Na⁺ out for every 2 K⁺ in. The membrane is then polarised. The resting potential of a neuron is typically about −70 mV (range about −40 to −90 mV); the minus sign means the inside is negative.

Action potential

Phases of an action potential

  1. Resting state, about −70 mV Inside negative; voltage-gated channels closed.
  2. Depolarisation to threshold, about −55 mV A stimulus opens voltage-gated Na⁺ channels; Na⁺ rushes in.
  3. Spike Inside becomes positive; the textbook gives a peak of about +45 mV.
  4. Repolarisation Na⁺ channels close, voltage-gated K⁺ channels open; K⁺ flows out and the inside becomes negative again.
  5. Hyperpolarisation, down to about −90 mV The slow 'lazy' K⁺ gates stay open a little too long.
  6. Return to rest K⁺ channels close; the pump restores the gradients.

A stimulus too weak to reach threshold produces no action potential, while any stimulus that reaches it produces a full-sized one: this is the all-or-none principle. The smallest stimulus that does so is the threshold stimulus.

Worked example 1: voltage changes

From −70 mV to the threshold of −55 mV the membrane rises by −55 − (−70) = 15 mV. From −70 mV to the peak of +45 mV the total rise is 45 − (−70) = 115 mV. During hyperpolarisation it falls to −90 mV, which is 90 − 70 = 20 mV below rest. Check the first: −70 + 15 = −55.

Speed of conduction

Conduction is faster in axons of larger diameter and much faster in myelinated axons. In a myelinated axon the voltage-gated channels are concentrated at the nodes of Ranvier, so the impulse jumps from node to node instead of travelling along every part of the membrane. This is saltatory conduction; it is fast and uses less energy, because ions cross the membrane only at the nodes. Speeds range from about 1 m/s in thin unmyelinated fibres to over 100 m/s in thick myelinated ones.

Worked example 2: how long does a signal take?

A signal travels 1 m along a myelinated motor axon at 100 m/s. Time = distance ÷ speed = 1 ÷ 100 = 0.01 s = 10 milliseconds. Along a thin unmyelinated fibre at 1 m/s the same distance takes 1 ÷ 1 = 1 s, one hundred times longer. This is why fibres that must react quickly are myelinated.

Synaptic transmission

Events at a chemical synapse

  1. Action potential reaches the axon terminal
  2. Voltage-gated Ca²⁺ channels open; Ca²⁺ enters
  3. Synaptic vesicles fuse with the presynaptic membrane Neurotransmitter is released into the synaptic cleft by exocytosis.
  4. Neurotransmitter binds receptors on the postsynaptic membrane Ligand-gated channels open.
  5. New potential in the postsynaptic neuron Excitatory (depolarises) or inhibitory (hyperpolarises).

The synapse is the junction between two neurons: a presynaptic neuron, a narrow synaptic cleft and a postsynaptic neuron. The cleft is a structural gap but a functional bridge. GABA (gamma-aminobutyric acid) is the brain's main inhibitory neurotransmitter, reducing neuron excitability.

Rest −70 mV → threshold −55 mV → spike (Na⁺ in) → repolarise (K⁺ out) → hyperpolarise → rest. Pump: 3 Na⁺ out, 2 K⁺ in.

Key takeaways

  • Resting potential about −70 mV, kept by K⁺ leakage and the Na⁺–K⁺ pump.
  • Na⁺ in causes depolarisation; K⁺ out causes repolarisation.
  • All-or-none: threshold reached, full spike; below threshold, nothing.
  • Ca²⁺ entry triggers neurotransmitter release at synapses.

Check your understanding

  1. 1. The most abundant cation inside a resting neuron is

    1. Na⁺
    2. Ca²⁺
    3. K⁺
    4. H⁺
    Show answer

    Answer: C. The axoplasm has a high concentration of K⁺ and a low concentration of Na⁺; the extracellular fluid is the reverse.

  2. 2. The Na⁺–K⁺ pump moves

    1. 3 Na⁺ in and 2 K⁺ out
    2. 3 Na⁺ out and 2 K⁺ in
    3. 2 Na⁺ out and 3 K⁺ in
    4. Na⁺ and K⁺ in the same direction
    Show answer

    Answer: B. The ATP-driven pump exchanges 3 Na⁺ outwards for 2 K⁺ inwards, maintaining the ionic gradients.

  3. 3. When the potential across the axon membrane becomes more negative than the resting potential, the neuron is

    1. depolarised
    2. repolarised
    3. at threshold
    4. hyperpolarised
    Show answer

    Answer: D. Falling below the resting potential, for example to about −90 mV, is hyperpolarisation.

  4. 4. During synaptic transmission, which ion's entry into the axon terminal causes release of neurotransmitter?

    1. Ca²⁺
    2. Na⁺
    3. K⁺
    4. Cl⁻
    Show answer

    Answer: A. Depolarisation of the terminal opens voltage-gated Ca²⁺ channels; Ca²⁺ entry makes vesicles fuse with the membrane and release their neurotransmitter.

  5. 5. Which statement about myelinated axons is NOT correct?

    1. They conduct impulses faster
    2. The impulse jumps from node to node
    3. They need more energy to conduct an impulse than unmyelinated axons
    4. Voltage-gated channels are concentrated at the nodes of Ranvier
    Show answer

    Answer: C. Saltatory conduction is faster and uses less energy, because ion exchange happens only at the nodes. So 'needs more energy' is the incorrect statement.

Privacy · Terms · Refunds · Delivery