Revision notes

Botany Chapter 11 Transport in Plants: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Types of transport and cell to cell transport

Classifying transport in plants
BasisTypeWhat it meansExamples
DistanceShort distance (cell to cell)Only a few cells, mostly sideways (lateral); links root hairs to xylem and leaf cells to phloemDiffusion, imbibition, osmosis
DistanceLong distanceMovement within the xylem or phloem networkAscent of sap, translocation of solutes
EnergyPassiveDownhill, driven by physical forces such as a concentration gradient; no energy spentDiffusion, facilitated diffusion, imbibition, osmosis
EnergyActiveUphill, against a gradient; a biological process that uses energy from respiration (ATP)Ion pumps
How membranes treat solvent and solute
TypeSolvent passes?Solute passes?Example
ImpermeableNoNoSuberised, cutinised or lignified cell walls
PermeableYesYesCellulose cell wall
SemipermeableYesNoParchment paper
Selectively permeableYesOnly some solutesPlasma membrane, tonoplast, membranes of organelles

Three types of carrier protein

  • Uniport
    • One type of molecule
    • Moves in one direction
    • Independent of other molecules
  • Symport (co-transport)
    • Two types of molecule
    • Both cross at the same time
    • Both move in the same direction
  • Antiport (counter transport)
    • Two types of molecule
    • Both cross at the same time
    • They move in opposite directions
Classified by how many kinds of molecule they carry and in which direction.
Comparing transport mechanisms
PropertySimple diffusionFacilitated diffusionActive transport
NaturePhysicalBiologicalBiological
Needs membrane proteinNoYesYes
SelectiveNoYesYes
Can be saturatedNoYesYes
Uphill transportNoNoYes
Needs ATPNoNoYes
Affected by inhibitorsNoYesYes

Downhill without protein = simple diffusion; downhill with protein = facilitated diffusion; uphill with protein and ATP = active transport.

Key takeaways: transport is short or long distance, passive or active. Diffusion is downhill and needs no energy; facilitated diffusion is also downhill but needs channel or carrier proteins; active transport goes uphill using ATP and pumps. Carriers may be uniports, symports or antiports.

Read the full lesson

Lesson 2

Plant water relations: imbibition, water potential and osmosis

Ψw = Ψs + Ψp (water potential = solute potential + pressure potential). Pure water: Ψ = 0. Water flows from higher Ψ to lower Ψ.

Three kinds of solution (always compared with another solution)
SolutionSoluteΨEffect on a cell placed in it
HypertonicHighLowDraws water out of the cell (exosmosis)
HypotonicLow or noneHighWater enters the cell (endosmosis)
IsotonicSame as cellSame as cellNo net movement of water

A plant cell in a hypertonic solution

  1. Exosmosis Water leaves the cell because the outside has lower Ψ.
  2. Protoplast shrinks Turgor falls; the membrane starts pulling away from the wall.
  3. Plasmolysis Membrane separates from the wall; the cell becomes flaccid.
  4. Deplasmolysis (if returned to water) Endosmosis makes the cell turgid again, if plasmolysis has not gone too far.
Stages of plasmolysis
FeatureIncipientEvidentFinal
MembraneSeparates from the wall only at the cornersFully detached from the wallFully detached, maximum shrinkage
Visible signNoneLeaves wiltSevere wilting and drooping
Reversible?YesYesNo

Key takeaways: imbibition is water uptake by colloids. Ψw = Ψs + Ψp; pure water is 0 and water moves to lower Ψ. DPD = OP − TP; water moves to higher DPD. Hypertonic solutions cause exosmosis and plasmolysis; hypotonic ones cause endosmosis.

Read the full lesson

Lesson 3

Absorption of water and the ascent of sap

Three routes of water across the root

  • Apoplast
    • Everything outside the plasma membrane: cell walls, spaces between cells, interiors of dead xylem cells
    • Water crosses no membrane
    • A continuous, non-living system
  • Symplast
    • The joined cytoplasm of all living cells, linked by plasmodesmata
    • Water crosses one membrane at the outer root cell
    • Then moves cell to cell through plasmodesmata
  • Transmembrane
    • Water enters a cell on one side and leaves on the other
    • Crosses at least two membranes per cell
    • May also cross the tonoplast
Active versus passive absorption of water
FeatureActive absorptionPassive absorption
Force produced byActivity of root and root hairsTension from transpiration pull; roots passive
Effect of transpirationNoneControls the rate
Respiratory energyNeededNot needed
RouteSymplastSymplast and apoplast

Theories of ascent of sap

  • Vital force theories Living cells are needed.
    • Relay pump theory: Godlewski (1884)
    • Pulsation theory: J. C. Bose (1923), using his crescograph
  • Root pressure theory Pressure built up in the root pushes sap up.
    • Term from Stephen Hales
    • Sap exudation (bleeding) from a cut stem
  • Physical force theories Dead xylem; purely physical forces.
    • Capillary theory: Boehm (1809)
    • Imbibition theory: Unger (1876), Sachs (1878)
    • Cohesion-tension theory: Dixon and Jolly (1894)

Cohesion holds the water column together, adhesion holds it to the xylem wall, and transpiration pulls it from the top.

Key takeaways: water crosses the root by apoplast, symplast and transmembrane routes; most uptake is passive, driven by transpiration. Xylem carries sap. Vital, root pressure, capillary and imbibition theories fail; the cohesion-tension theory explains the ascent of sap best.

Read the full lesson

Lesson 4

Transpiration: stomata, factors, guttation and measurement

Types of transpiration (shares of total loss as given in the textbook)
TypeThroughShare of water lost
StomatalStomata, mostly on the lower epidermis of leavesMost of it, about 90–95%
CuticularThe waxy cuticle over the epidermisAbout 5–10%; very low or absent in xerophytes with a thick cuticle
LenticularLenticels, lens-shaped pores in the bark of woody stemsVery small, about 0.1%

Opening of stomata in light (K⁺ transport theory)

  1. Starch → malic acid In the guard cell, starch is converted into malic acid.
  2. Malic acid → malate⁻ + H⁺ The acid dissociates into malate anions and protons.
  3. H⁺ out, K⁺ in Protons go to subsidiary cells in exchange for K⁺; this ion exchange uses ATP.
  4. Cl⁻ balances K⁺ Solute concentration rises and the guard cell's water potential falls.
  5. Water enters, stoma opens The hypertonic guard cell takes in water; turgor rises and the pore opens.
External and internal factors
FactorEffect
HumidityHumid air reduces transpiration; dry air increases it
TemperatureA rise increases transpiration, but at very high temperature stomata close and it stops
LightBright light raises temperature and membrane permeability, increasing transpiration
WindA breeze removes moist air near the leaf and increases transpiration; very strong wind closes stomata and reduces it
Atmospheric pressureLow pressure (hills) increases it, though cold hill temperatures offset this
Soil waterShortage leads to wilting: incipient (not yet visible), temporary (wilts by day, recovers at night), permanent (no recovery)
Leaf area and structureLarger area, more loss; sunken stomata, hairs, thick cuticle, gum and mucilage reduce it; phylloclade (Opuntia), cladode (Asparagus) and phyllode (Acacia melanoxylon) reduce leaf surface

Transpiration is a 'necessary evil' (Curtis): it wastes water, yet it drives water absorption, the ascent of sap and mineral transport, and cools leaves in strong sunlight.

Key takeaways: most transpiration is stomatal. Stomata open when guard cells gain K⁺ (balanced by Cl⁻ and malate) and water, and close when ABA makes them lose K⁺. Humidity, temperature, light, wind, pressure, soil water and leaf features change the rate. Guttation is liquid loss through hydathodes.

Read the full lesson

Lesson 5

Translocation of organic solutes and mineral absorption

From leaf to sink

  1. Photosynthate made Mostly starch or triose phosphate in the chloroplast; turned into sucrose in the cytoplasm.
  2. Phloem loading Sucrose moves a short distance from mesophyll cells into sieve elements.
  3. Long-distance transport Sucrose travels in sieve tubes to the sink.
  4. Phloem unloading Sucrose leaves the sieve elements and moves a short distance to sink cells.
  5. Storage or use Sink cells store the sugar or use it in metabolism.

Mechanisms of mineral absorption

  • Passive (no metabolic energy)
    • Contact exchange: ions on clay and root surfaces oscillate in small volumes that overlap, so like-charged ions swap
    • Carbonic acid exchange: root CO₂ + water → H₂CO₃ → H⁺ + HCO₃⁻; H⁺ displaces cations from clay, which then reach the root
    • Donnan equilibrium: fixed anions inside attract extra cations
  • Active (metabolic energy)
    • Carrier concept: Van den Honert (1937)
    • Cytochrome pump theory: Lundegardh
    • Protein-lecithin theory: Bennet-Clark (1956)

Food flows in phloem from source to sink along a turgor pressure gradient (Munch). Minerals enter separately from water, passively by ion exchange or actively by carriers.

Key takeaways: phloem carries sucrose up, down and sideways from source to sink; mass flow along a turgor gradient is the main explanation. Minerals enter independently of water, passively (ion exchange, Donnan equilibrium) or actively (carriers using energy).

Read the full lesson

Privacy · Terms · Refunds · Delivery