- Practice
- About 16 min
- 5 practice questions
Growth: characteristics, phases, growth rates and measurement
Define growth and its characteristics, describe the four phases of the sigmoid growth curve, calculate arithmetic and geometric growth, distinguish absolute and relative growth, and measure growth with an arc auxanometer.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define growth and describe open and closed forms of growth.
- Classify plants as monocarpic or polycarpic with examples.
- Describe the lag, log, decelerating and maturation phases of the grand period of growth.
- Use Lt = L0 + rt and W1 = W0 e^(rt) and compare arithmetic and geometric growth.
- Calculate absolute and relative growth and the reading of an arc auxanometer.
A banyan tree can keep growing for centuries, while a paddy plant finishes its life in a single season. A seed becomes a seedling, a seedling a tree. This chapter of the Tamil Nadu textbook asks how plants grow, how growth can be measured, and which internal signals and outside conditions control it.
What growth is
Growth is an irreversible, permanent increase in size, shape, number, volume and dry weight. It happens through cell division, cell enlargement, differentiation and maturation, and at the cell level it means an increase in protoplasm.
- Stems and roots grow indefinitely because their meristems keep dividing: an open (indeterminate) form of growth. Leaves, flowers and fruits stop at a fixed size: a closed (determinate) form.
- The apical meristems add cells at root and shoot tips, giving primary (length) growth; the vascular cambium and cork cambium add cells sideways, giving secondary growth in girth.
- Monocarpic annuals flower once and die within a year (paddy, bean). Monocarpic perennials live many years but flower only once (bamboo). Polycarpic perennials flower every year (coconut).
The grand period of growth
The whole span from the start to the end of growth is the grand period of growth. Plotting total growth against time gives an S-shaped sigmoid curve with four phases.
Four phases of the sigmoid growth curve
- Lag phase New cells form slowly from existing ones at tips of stems, roots and branches; growth is just starting.
- Log (exponential) phase Cells enlarge rapidly as wall material is laid down; growth rate is at its maximum; internodes lengthen.
- Decelerating phase Metabolism slows because of internal or external limits; growth rate falls.
- Maturation (steady state) phase Cell walls thicken from inside; overall growth stops and the growth rate becomes zero.
Arithmetic and geometric growth
Growth rate is the increase in growth per unit time. In arithmetic growth, after each division only one daughter cell keeps dividing while the other stops and matures. One new body cell is added each round, so growth is linear: plotting length against time gives a straight line. A leaf hair of 5–10 cells in a single row, all formed by the basal cell, grows this way.
Arithmetic: Lt = L0 + rt (a straight line). Geometric: W1 = W0 e^(rt) (an exponential curve), where r is the relative growth rate, or efficiency index.
In geometric growth, all daughter cells keep dividing, so the cell number doubles each round: 2, 4, 8 ... after n rounds there are 2ⁿ cells. Here W0 is the initial size, W1 the final size, t the time, e the base of natural logarithms and r the relative growth rate, a measure of the plant's ability to make new material (the efficiency index). The final size depends on the starting size. Young embryos grow geometrically; later, division is restricted to the tips and growth becomes mostly arithmetic, so a plant is a mixture of young dividing cells and older mature ones.
Worked example 1: arithmetic versus geometric
After 20 rounds of division, geometric growth gives 2²⁰ = 1,048,576 cells. Arithmetic growth adds one body cell per round, so 20 rounds give only 20 body cells. To reach about a million cells arithmetically would need about a million rounds; at one round per day that is 1,000,000 ÷ 365 ≈ 2739.7 years. This is why large organs are built by geometric growth and only tiny structures, such as a leaf hair, by arithmetic growth.
Absolute and relative growth
Absolute growth is the total increase in a given time. Relative growth is that increase per unit of the starting size. A small leaf and a large leaf can show the same absolute growth but very different relative growth.
Worked example 2: two leaves
In the same time, leaf A grows from 5 cm² to 10 cm² and leaf B from 50 cm² to 55 cm². Absolute growth: A = 10 − 5 = 5 cm²; B = 55 − 50 = 5 cm². Equal. Relative growth: A = 5 ÷ 5 × 100 = 100%; B = 5 ÷ 50 × 100 = 10%. Leaf A's relative growth is ten times faster because it started small.
Measuring growth: the arc auxanometer
A thread tied to the stem tip passes over a small pulley and is kept taut by a weight. A long pointer fixed to the pulley's axis moves over a graduated arc as the stem lengthens. Because the pointer is much longer than the pulley's radius, a tiny growth gives a large, easily read movement.
Actual growth in length = (distance moved by pointer × radius of pulley) ÷ length of pointer
For example, if the pointer moves 10 inches, the pulley radius is 4 inches and the pointer is 20 inches long, actual growth = 10 × 4 ÷ 20 = 2 inches. Always use the radius: if you are given a diameter, halve it first.
Key takeaways: growth is an irreversible increase in size and dry weight. The sigmoid curve has lag, log, decelerating and maturation phases. Arithmetic growth is linear (Lt = L0 + rt); geometric growth is exponential (W1 = W0 e^(rt)). Relative growth compares the increase with the starting size.
Check your understanding
-
1. In which phase of the sigmoid growth curve is the growth rate at its maximum?
- Lag phase
- Log phase
- Decelerating phase
- Maturation phase
Show answer
Answer: B. In the log (exponential) phase, new cells enlarge rapidly and physiological processes are fast, so the growth rate is highest. It is slow in the lag phase, falling in the decelerating phase and zero at maturity.
-
2. Bamboo lives for many years but flowers only once and then dies. It is a:
- Polycarpic perennial
- Monocarpic annual
- Monocarpic perennial
- Biennial
Show answer
Answer: C. A monocarpic plant flowers once in its life; a perennial lives for several years. Bamboo is the textbook's example of a monocarpic perennial; coconut is polycarpic.
-
3. The pulley of an arc auxanometer has a diameter of 12 inches, the pointer is 10 inches long and it moves 5 inches. What is the actual growth?
- 6 inches
- 12 inches
- 30 inches
- 3 inches
Show answer
Answer: D. Radius = 12 ÷ 2 = 6 inches. Actual growth = 5 × 6 ÷ 10 = 3 inches. Using the diameter instead of the radius would wrongly give 6 inches.
-
4. Which equation describes arithmetic growth?
- Lt = L0 + rt
- W1 = W0 e^(rt)
- Lt = L0 × 2ⁿ
- W1 = W0 − rt
Show answer
Answer: A. Arithmetic growth adds a constant amount per unit time, so length rises linearly: Lt = L0 + rt. W1 = W0 e^(rt) describes geometric (exponential) growth.
-
5. A leaf grows from 20 cm² to 30 cm². What is its relative growth?
- 10 cm²
- 33%
- 150%
- 50%
Show answer
Answer: D. Absolute growth = 30 − 20 = 10 cm². Relative growth = 10 ÷ 20 × 100 = 50%, the increase compared with the starting size.
Sign in to keep track of the lessons you finish.