• Practice
  • About 25 min
  • 5 practice questions

Stoichiometry and the limiting reagent

Use a balanced equation to relate moles, masses and gas volumes of reactants and products, allow for impure samples, and identify the limiting and excess reagents.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Read the mole, mass and volume relationships from a balanced equation.
  • Calculate the amount of product from a given reactant, or the reactant needed for a given product.
  • Find the percentage composition of a compound and allow for the purity of a sample.
  • Identify the limiting reagent and calculate the product formed and the excess left over.

A recipe says 2 slices of bread and 1 slice of cheese make 1 sandwich. From that you can work out the bread needed for 10 sandwiches, or the sandwiches you can make from 7 slices of cheese. A balanced chemical equation is a recipe of the same kind, written in moles.

What stoichiometry means

The word stoichiometry comes from the Greek stoicheion (element) and metron (measure). It is the numerical relationship between the amounts of reactants and products in a balanced equation, expressed in moles. Quantities can be given as moles, masses or gas volumes, and these three are interconvertible: mass ÷ molar mass = moles; moles × 22.4 L = gas volume at 273 K and 1 atm. The symbol ≡ means 'stoichiometrically equivalent to'.

Take the combustion of propane, C₃H₈ + 5O₂ → 3CO₂ + 4H₂O. Check the balance: C 3 = 3; H 8 = 4 × 2; O 5 × 2 = 10 = 3 × 2 + 4. So 1 mol C₃H₈ ≡ 5 mol O₂ ≡ 3 mol CO₂ ≡ 4 mol H₂O.

Reading the propane equation three ways (44 + 160 = 132 + 72 = 204 g: mass is conserved)
RelationshipC₃H₈O₂CO₂H₂O
Coefficients (moles)1 mol5 mol3 mol4 mol
Masses (moles × molar mass)1 × 44 = 44 g5 × 32 = 160 g3 × 44 = 132 g4 × 18 = 72 g
Gas volumes at 273 K and 1 atm22.4 L112 L67.2 L89.6 L (if it stayed a gas)

Convert what you are given to moles, use the mole ratio from the balanced equation, then convert the answer to the unit asked for.

— Stoichiometry in three steps

Worked example 1: moles to moles

How many moles of oxygen are needed to burn 4 mol of propane? Working: 1 mol C₃H₈ ≡ 5 mol O₂, so 4 mol C₃H₈ needs 4 × 5 = 20 mol O₂.

Worked example 2: mass to mass

What mass of CO₂ forms when 22 g of propane burns completely? Working: n(C₃H₈) = 22 ÷ 44 = 0.5 mol; n(CO₂) = 0.5 × 3 = 1.5 mol; mass = 1.5 × 44 = 66 g.

Worked example 3: mass to gas volume

Heating limestone: CaCO₃ → CaO + CO₂ (Ca 1, C 1, O 3 on each side). What volume of CO₂ at 273 K and 1 atm comes from 25 g of CaCO₃? Working: M(CaCO₃) = 40 + 12 + 48 = 100 g mol⁻¹; n = 25 ÷ 100 = 0.25 mol; 1 mol CaCO₃ ≡ 1 mol CO₂, so V = 0.25 × 22.4 = 5.6 L. (At the textbook's STP of 273 K and 1 bar, use 22.71 L instead: 0.25 × 22.71 = 5.68 L.)

Percentage composition and purity

The percentage of an element in a compound = (mass of that element in one mole ÷ molar mass) × 100. For CaCO₃: Ca = 40 ÷ 100 × 100 = 40%; C = 12 ÷ 100 × 100 = 12%; O = 48 ÷ 100 × 100 = 48% (total 100%). An impure sample reacts only through its pure part, so first multiply the sample mass by the purity.

Worked example 4: an impure sample

What mass of quicklime (CaO) can be made from 2 kg of limestone that is 80% CaCO₃? Working: pure CaCO₃ = 2000 g × 80 ÷ 100 = 1600 g = 1600 ÷ 100 = 16 mol; 1 mol CaCO₃ ≡ 1 mol CaO; M(CaO) = 40 + 16 = 56 g mol⁻¹; mass = 16 × 56 = 896 g (0.896 kg).

The limiting reagent

If reactants are mixed in exactly the ratio of the equation, all are used up. Usually they are not. The reactant that is used up first stops the reaction and decides how much product forms: it is the limiting reagent. The others are excess reagents, and some of each is left over. With 10 slices of bread and 7 of cheese you make only 5 sandwiches: bread limits, and 2 slices of cheese are left.

Finding the limiting reagent

  1. Moles of each reactant Convert every given mass or volume to moles.
  2. Divide by its coefficient The smallest result marks the limiting reagent.
  3. Product from the limiting reagent Use its moles and the mole ratio.
  4. Excess left Moles of excess given − moles used up.

Worked example 5: making ammonia

N₂ + 3H₂ → 2NH₃. 56 g of N₂ reacts with 10 g of H₂. Working: n(N₂) = 56 ÷ 28 = 2 mol; n(H₂) = 10 ÷ 2 = 5 mol. Divide by coefficients: N₂ 2 ÷ 1 = 2; H₂ 5 ÷ 3 = 1.67, the smaller, so H₂ is limiting. NH₃ formed = 5 × 2/3 = 3.33 mol = 3.333 × 17 = 56.7 g. N₂ used = 5 ÷ 3 = 1.667 mol, so N₂ left = 2 − 1.667 = 0.333 mol = 0.333 × 28 = 9.3 g. Check: 56 + 10 = 66 g in; 56.7 + 9.3 = 66 g out.

Worked example 6: water from hydrogen and oxygen

2H₂ + O₂ → 2H₂O with 4 g of H₂ and 48 g of O₂. Working: n(H₂) = 4 ÷ 2 = 2 mol, 2 ÷ 2 = 1; n(O₂) = 48 ÷ 32 = 1.5 mol, 1.5 ÷ 1 = 1.5. H₂ gives the smaller value, so H₂ is limiting. Water = 2 mol = 36 g; O₂ used = 1 mol, left = 0.5 mol = 16 g. Check: 52 g = 36 g + 16 g.

Key takeaways: a balanced equation gives mole ratios; convert to moles, apply the ratio, convert back. Allow for purity before using the equation. The limiting reagent is the one with the smallest moles ÷ coefficient; it alone decides the yield.

Check your understanding

  1. 1. In 2SO₂ + O₂ → 2SO₃, how many moles of oxygen are needed to convert 6 mol of SO₂ completely?

    1. 6 mol
    2. 3 mol
    3. 12 mol
    4. 2 mol
    Show answer

    Answer: B. 2 mol SO₂ ≡ 1 mol O₂, so 6 mol SO₂ needs 6 × 1/2 = 3 mol O₂.

  2. 2. What mass of carbon dioxide forms when 6 g of carbon burns in excess oxygen? (C + O₂ → CO₂)

    1. 44 g
    2. 11 g
    3. 22 g
    4. 6 g
    Show answer

    Answer: C. n(C) = 6 ÷ 12 = 0.5 mol; 1 mol C ≡ 1 mol CO₂, so 0.5 mol CO₂ = 0.5 × 44 = 22 g.

  3. 3. 6.54 g of zinc (Zn = 65.4) reacts with excess hydrochloric acid: Zn + 2HCl → ZnCl₂ + H₂. What volume of hydrogen forms at 273 K and 1 atm?

    1. 2.24 L
    2. 22.4 L
    3. 1.12 L
    4. 4.48 L
    Show answer

    Answer: A. n(Zn) = 6.54 ÷ 65.4 = 0.1 mol; 1 mol Zn ≡ 1 mol H₂, so V = 0.1 × 22.4 L = 2.24 L.

  4. 4. 3 mol of magnesium is burnt with 2 mol of oxygen: 2Mg + O₂ → 2MgO. Which is the limiting reagent and how much MgO forms?

    1. O₂; 2 mol of MgO
    2. Mg; 4 mol of MgO
    3. O₂; 4 mol of MgO
    4. Mg; 3 mol of MgO
    Show answer

    Answer: D. Mg: 3 ÷ 2 = 1.5; O₂: 2 ÷ 1 = 2. Mg gives the smaller value, so Mg is limiting. 2 mol Mg ≡ 2 mol MgO, so 3 mol Mg gives 3 mol MgO; only 1.5 mol O₂ is used and 0.5 mol is left.

  5. 5. 4 mol of H₂ and 3 mol of O₂ react to form water (2H₂ + O₂ → 2H₂O). What is left over at the end?

    1. 16 g of O₂
    2. 32 g of O₂
    3. 2 g of H₂
    4. Nothing is left
    Show answer

    Answer: B. H₂: 4 ÷ 2 = 2; O₂: 3 ÷ 1 = 3, so H₂ is limiting. 4 mol H₂ uses 2 mol O₂, leaving 3 − 2 = 1 mol O₂ = 32 g.

Privacy · Terms · Refunds · Delivery