- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Interpretation of Topographical Map
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before reading any explanation. Note the ones you got wrong, then go back to the lesson named at the end. Several questions ask you to apply a method to new made-up data, so keep a pencil and rough paper ready.
Final self-assessment
-
1. Topographical maps are also known as:
- ordnance maps
- weather maps
- cadastral maps only
- thematic maps
Show answer
Answer: A. The textbook says topographic maps are general reference maps, also called ordnance maps.
-
2. Which scale does the textbook give as the main scale of Survey of India topo sheets?
- 1 : 1,000,000
- 1 : 250,000
- 1 : 50,000
- 1 : 10,000
Show answer
Answer: C. Sheets are prepared largely on 1 : 50,000, with others on 1 : 25,000, 1 : 250,000 and 1 : 1,000,000.
-
3. Defence Series Maps differ from Open Series Maps in that DSMs are:
- unrestricted for everyone
- classified and meant mainly for defence and national security
- drawn without contours
- made only at 1 : 1,000,000
Show answer
Answer: B. DSMs carry full content for defence needs and are classified by the Ministry of Defence; OSMs are unrestricted.
-
4. On a Survey of India sheet, a dry stream bed is shown in:
- blue
- green
- red
- black
Show answer
Answer: D. The textbook lists dry streams among the features in black; water bodies with water are blue.
-
5. Contour lines, sand features and barren rocky areas are shown in:
- brown
- yellow
- red
- white
Show answer
Answer: A. Brown is used for contours, their values, form lines, sand features and barren rocky areas.
-
6. An unmetalled road is shown by:
- a single broken line
- broken double lines
- red dots
- solid double lines
Show answer
Answer: B. Metalled roads are double lines; unmetalled roads broken double lines; cart tracks single broken lines.
-
7. In million sheet 63 (24°-28°N, 80°-84°E), which degree sheet covers 27°-28°N, 83°-84°E?
- 63D
- 63A
- 63P
- 63M
Show answer
Answer: D. The easternmost column (83°-84°E) is M, N, O, P from north to south, so the northernmost, 27°-28°N, is 63M.
-
8. Sheet 63K covers 25°-26°N, 82°-83°E. Which 1 : 50,000 sheet covers its north-west corner, 25°45′-26°00′N, 82°00′-82°15′E?
- 63K/16
- 63K/4
- 63K/1
- 63K/13
Show answer
Answer: C. Numbering starts at the north-west corner and runs south down the first column, so the north-west sheet is 63K/1.
-
9. A 1 : 25,000 sheet is what fraction of the area of a 1 : 50,000 sheet?
- one-quarter
- one-half
- one-sixteenth
- the same area
Show answer
Answer: A. Each 1 : 50,000 sheet (15′ × 15′) is divided into four quarter sheets of 7′30″ × 7′30″.
-
10. According to the textbook, names of the next places along roads with distances in km belong to:
- the inter marginal information
- the extra marginal information
- the intra marginal information
- the legend of colours
Show answer
Answer: C. The textbook places grid information, contour values and names of next places with distances under intra marginal information.
-
11. Tributaries joining a main stream at nearly right angles between parallel ridges form which pattern?
- Radial
- Trellis
- Dendritic
- Circular
Show answer
Answer: B. A trellis pattern develops where streams follow parallel valleys between ridges and join at right angles.
-
12. A made-up sheet shows salt pans, fishing hamlets in a line along the coast and a port town. Which land use and settlement inference is best?
- Mining in a desert
- Hill-station tourism
- Plantation agriculture in hills
- Coastal economy of salt-making, fishing and trade, with linear settlements
Show answer
Answer: D. Salt pans, coastal fishing hamlets in a line and a port point to a coastal economy and a linear settlement pattern.
-
13. Which statement best shows interpretation rather than mere listing?
- There is a railway
- The railway follows the plain and avoids the hills, so towns have grown along it
- The map has a legend
- There are blue lines
Show answer
Answer: B. Interpretation relates features (railway, relief, towns) and explains them; the others only list.
-
14. In the textbook's sample sheet, which contour roughly marks the meeting of the Ganga plain and the Vindhyan plateau?
- 120 m
- 84 m
- 203 m
- 160 m
Show answer
Answer: A. The textbook says the meeting point of the plain and the plateau is marked by the 120 m contour. 84 m is a bench mark; 160 m is the plateau's average height.
-
15. Why does a good interpretation quote figures such as heights and survey dates from the sheet itself?
- Because the examiner wants long answers
- Because every statement should rest on map evidence
- Because figures replace headings
- Because the sheet has no legend
Show answer
Answer: B. Each statement must be supported by evidence from the sheet: contour values, spot heights, symbols, names and marginal information.
Questions 1-3: lesson 1 (topo sheets and SOI). Questions 4-6: lesson 2 (signs and colours). Questions 7-10: lesson 3 (sheet numbers and marginal information). Questions 11-13: lesson 4 (how to interpret). Questions 14-15: lesson 5 (model interpretation).
Sign in to keep track of the lessons you finish.