• Practice
  • About 18 min
  • 5 practice questions

In the field: observing, measuring and sampling

Collect information in the field by observation, notes, photographs, sketches, instruments, compass, maps, GNSS, permitted samples and secondary data, and use simple measurements such as pacing and the clinometer.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the methods of collecting information in the field.
  • Measure distances by pacing and heights with a clinometer.
  • Know what samples may and may not be collected.

The actual field work begins when you reach the study area. The textbook lists the ways information is collected; this lesson adds two simple measurements that need almost no equipment, so that the methods become real.

Methods of collecting information

  1. Observe the features and take notes; record with photographs and audio-video.
  2. Prepare field sketches with colour pencils.
  3. Use instruments to measure distances, weather elements, heights and depths.
  4. Find direction with a magnetic compass and orient the maps and images to the ground.
  5. Use your map-reading practice with topo sheets, satellite images and aerial photographs to recognise and map features.
  6. Locate important places and routes with GNSS and web-based mapping.
  7. Collect representative samples of rock, soil, surface water and groundwater for analysis and class discussion. The textbook stresses: do not collect plants, animals or micro-organisms from the field, as this is banned.
  8. Collect secondary data from local authorities and officers in charge of the area.

A good field sketch

A field sketch is not an artistic drawing. Draw a frame, mark the direction you are facing, sketch only the main lines (skyline, slopes, river, fields, buildings), and label the features with arrows and short notes. Add a title, date, place and your name.

Measuring distance by pacing

Pacing is a quick way to measure a playground or a field. First calibrate your pace: walk a known distance, such as a measured 50 m, and count your steps.

Worked example 1: measuring the playground

A student takes 80 steps over a measured 50 m. Pace length = 50 ÷ 80 = 0.625 m. She then paces the playground: 136 steps along the length and 96 across. Length = 136 × 0.625 = 85 m; width = 96 × 0.625 = 60 m. Area = 85 × 60 = 5,100 m² (0.51 hectare, since 1 hectare = 10,000 m²). To draw a plan at 1 : 1,000, 1 cm represents 10 m, so the plan is 8.5 cm by 6 cm.

Measuring height with a clinometer

Stand at a measured horizontal distance from the foot of a tree, building or hillock, and use a clinometer to read the angle of elevation to its top. Then:

Height = (horizontal distance × tan of angle of elevation) + height of the observer's eye above the ground.

Worked example 2: height of a tree

A student stands 20 m from a tree on level ground; the angle to the top is 45°, and her eye is 1.5 m above the ground. tan 45° = 1, so height = 20 × 1 + 1.5 = 21.5 m. For a hillock, at 100 m from its foot, the angle is 30° (tan 30° ≈ 0.577): height ≈ 100 × 0.577 + 1.5 = 57.7 + 1.5 = 59.2 m. Check the first: if the tree were 21.5 m, the part above eye level is 20 m, equal to the distance, which is exactly what 45° means.

Using a clinometer

  1. Measure the base distance Tape from you to the foot of the object.
  2. Sight the top Read the angle of elevation.
  3. Calculate Distance × tan angle.
  4. Add eye height Your eye level above the ground.

Working ethically and safely

  • Ask permission before entering fields or private land, and before photographing or recording people.
  • Leave the site as you found it: no litter, no damage, no plants or animals taken.
  • Stay with your group, keep away from water, cliffs and traffic, and follow the teacher's instructions.

Key takeaways: in the field, observe and note, photograph, sketch, measure with instruments, orient maps with a compass, locate with GNSS, collect permitted samples (rock, soil, water only) and secondary data. Pacing gives distances once your pace is calibrated; a clinometer gives height = distance × tan angle + eye height.

Check your understanding

  1. 1. According to the textbook, which of these must NOT be collected from the field?

    1. Soil samples
    2. Rock samples
    3. Groundwater samples
    4. Plants and animals
    Show answer

    Answer: D. The textbook allows representative samples of rock, soil, surface water and groundwater, but says not to collect plants, animals or micro-organisms, as this is banned.

  2. 2. A student takes 60 steps over a measured 45 m. Her pace length is:

    1. 0.75 m
    2. 1.33 m
    3. 0.6 m
    4. 1.5 m
    Show answer

    Answer: A. Pace length = 45 ÷ 60 = 0.75 m.

  3. 3. Using that pace of 0.75 m, a path of 120 steps is:

    1. 160 m
    2. 90 m
    3. 120 m
    4. 75 m
    Show answer

    Answer: B. 120 × 0.75 = 90 m.

  4. 4. Standing 30 m from a building, the angle to its top is 45° and your eye is 1.5 m above the ground. The building's height is:

    1. 30 m
    2. 28.5 m
    3. 31.5 m
    4. 45 m
    Show answer

    Answer: C. tan 45° = 1, so 30 × 1 = 30 m above eye level; add 1.5 m: 31.5 m.

  5. 5. Which instrument is used to orient a map to the ground in the field?

    1. Magnetic compass
    2. Rain gauge
    3. Thermometer
    4. Barometer
    Show answer

    Answer: A. The textbook says to find direction with a magnetic compass and orient the maps and images.

Privacy · Terms · Refunds · Delivery