- Practice
- About 22 min
- 5 practice questions
Angles, basic identities and radian measure
Measure angles in degrees, minutes and seconds, place them in standard position, find coterminal angles, prove identities with the Pythagorean relations, and convert between degrees and radians to find arc lengths and sector areas.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe positive and negative angles, the three systems of angle measure and degree-minute-second conversions.
- Place an angle in standard position, name its quadrant and find coterminal angles.
- Recall the exact values at 0°, 30°, 45°, 60° and 90°, and prove identities with the Pythagorean identities.
- Convert between degrees and radians and use s = rθ and sector area = ½r²θ.
Right-triangle trigonometry only handles acute angles, yet heights of mountains, distances to planets and every kind of wave need more. The Tamil Nadu textbook builds trigonometric functions for any real number, starting from angles, their measurement and the radian, which is the unit used in all of calculus.
Angles and how we measure them
An angle is formed when a ray OA turns about its end point O (the vertex) to a new position OB. OA is the initial side and OB the terminal side. An anticlockwise turn gives a positive angle and a clockwise turn a negative angle; one full turn back to the start is a complete rotation.
| System | Basic unit | Subdivisions |
|---|---|---|
| Sexagesimal (degrees) | a right angle = 90° | 1° = 60′ (minutes), 1′ = 60″ (seconds) |
| Centesimal (grades) | a right angle = 100ᵍ | 1ᵍ = 100 minutes, 1 minute = 100 seconds |
| Circular (radians) | an arc equal to the radius | 1 complete rotation = 2π radians |
A complete rotation is 360°, so 1° is 1/360 of a rotation, 1′ = (1/60)° and 1″ = (1/3600)°; the idea works like hours, minutes and seconds of time. Two angles are congruent if they have equal measure, complementary if they add to 90°, supplementary if they add to 180°, and conjugate (between 0° and 360°) if they add to 360°.
Worked example 1: degrees, minutes and seconds
(i) Write 47.3625° in degrees, minutes and seconds. 0.3625° × 60 = 21.75′, and 0.75′ × 60 = 45″. So 47.3625° = 47°21′45″. (ii) 25°18′36″ = 25 + 18/60 + 36/3600 = 25 + 0.3 + 0.01 = 25.31°. (iii) The complement of 42°27′15″ is 90° − 42°27′15″ = 89°59′60″ − 42°27′15″ = 47°32′45″.
Standard position, quadrants and coterminal angles
An angle is in standard position when its vertex is at the origin and its initial side lies along the positive x-axis. It lies in the quadrant that contains its terminal side: 0° to 90° is quadrant I, 90° to 180° quadrant II, 180° to 270° quadrant III and 270° to 360° quadrant IV. Angles whose terminal side lies on an axis (0°, 90°, 180°, 270°, 360°, the multiples of 90°) are quadrantal angles. Angles with the same terminal side are coterminal; they differ by a whole number of rotations: β = α + k(360°), k ∈ Z.
Worked example 2: quadrants and coterminal angles
(i) 1000° = 2(360°) + 280°, so 1000° is coterminal with 280° and lies in quadrant IV. (ii) −470° + 2(360°) = 250°, so −470° lies in quadrant III. (iii) A coterminal angle in [0°, 360°) for 845° is 845° − 720° = 125°, and for −600° it is −600° + 720° = 120°. (iv) 50°, 410° and −310° are coterminal, since they differ by multiples of 360°.
Ratios, exact values and basic identities
In a right triangle with an acute angle θ, sin θ = opposite/hypotenuse and cos θ = adjacent/hypotenuse; then tan θ = sin θ/cos θ, cot θ = cos θ/sin θ, sec θ = 1/cos θ and cosec θ = 1/sin θ.
| θ | 0° | 30° | 45° | 60° | 90° |
|---|---|---|---|---|---|
| sin θ | 0 | 1/2 | 1/√2 | √3/2 | 1 |
| cos θ | 1 | √3/2 | 1/√2 | 1/2 | 0 |
| tan θ | 0 | 1/√3 | 1 | √3 | not defined |
Because cos 90° = 0, tan 90° and sec 90° are not defined; because sin 0° = 0, cot 0° and cosec 0° are not defined. An identity holds for every admissible value of the angle; sin θ = 1/2 is not an identity, since it fails at θ = 60°. The three Pythagorean identities are the main tools:
sin²θ + cos²θ = 1, sec²θ − tan²θ = 1, cosec²θ − cot²θ = 1
Worked example 3: proving identities
(i) Prove (1 − sin θ)/(1 + sin θ) = (sec θ − tan θ)². Right side: ((1 − sin θ)/cos θ)² = (1 − sin θ)²/(1 − sin²θ) = (1 − sin θ)²/((1 − sin θ)(1 + sin θ)) = (1 − sin θ)/(1 + sin θ). (ii) Prove (sin θ + cosec θ)² + (cos θ + sec θ)² = 7 + tan²θ + cot²θ. Expanding, the left side is sin²θ + 2 + cosec²θ + cos²θ + 2 + sec²θ = 1 + 4 + (1 + cot²θ) + (1 + tan²θ) = 7 + tan²θ + cot²θ, since sin θ cosec θ = cos θ sec θ = 1.
Worked example 4: eliminating θ
Eliminate θ from x = a sec θ and y = b tan θ. Then sec θ = x/a and tan θ = y/b, and sec²θ − tan²θ = 1 gives x²/a² − y²/b² = 1.
Radian measure
Definition. The radian measure of a central angle is the arc length it cuts off divided by the radius: θ = s/r, so s = rθ. All circles are similar, so this ratio depends only on the angle. One radian is the angle subtended at the centre by an arc equal in length to the radius. Since s and r are both lengths, a radian has no unit; an angle written without a unit is understood to be in radians, so sin 90° = 1 but sin 90 ≠ 1.
A full rotation sweeps the whole circumference 2πr, so it is 2π radians: π radians = 180°. Hence 1 radian = (180/π)° ≈ 57°17′45″ and 1° = π/180 ≈ 0.017453 radian. The area of a sector with central angle θ (radians) is (θ/2π) × πr² = ½r²θ, which is simpler than the degree form (θ/360°)πr².
| Degrees | 0° | 30° | 45° | 60° | 90° | 180° | 270° | 360° |
|---|---|---|---|---|---|---|---|---|
| Radians | 0 | π/6 | π/4 | π/3 | π/2 | π | 3π/2 | 2π |
Converting between degrees and radians
- Degrees to radians multiply by π/180
- Radians to degrees multiply by 180/π
- In formulas use radians in s = rθ and ½r²θ
Worked example 5: conversions, arcs and sectors
(i) 75° = 75 × π/180 = 5π/12; −210° = −7π/6. (ii) 7π/9 radians = 7 × 180°/9 = 140°; 2.5 radians = 2.5 × 180°/π ≈ 143.24°. (iii) An arc of a circle of radius 12 cm subtends 50° = 5π/18 at the centre: s = 12 × 5π/18 = 10π/3 cm ≈ 10.47 cm. (iv) A sector of radius 6 cm with angle π/3 has area ½ × 36 × π/3 = 6π cm². (v) Equal arcs subtend 45° and 75° in two circles: r₁θ₁ = r₂θ₂ gives r₁ : r₂ = 75 : 45 = 5 : 3, since the larger angle belongs to the smaller circle.
Key takeaways: anticlockwise angles are positive; coterminal angles differ by multiples of 360° (or 2π); the Pythagorean identities prove most identities; π radians = 180°; and s = rθ and A = ½r²θ need θ in radians.
Check your understanding
-
1. What is 2π/5 radians in degrees?
- 36°
- 144°
- 72°
- 40°
Show answer
Answer: C. Multiply by 180/π: (2π/5) × (180/π) = 360/5 = 72°.
-
2. In a circle of radius 9 cm, what is the length of the arc subtending 40° at the centre?
- 2π cm
- 4π cm
- 360 cm
- π cm
Show answer
Answer: A. 40° = 40 × π/180 = 2π/9 radian. So s = rθ = 9 × 2π/9 = 2π cm, about 6.28 cm.
-
3. In which quadrant does an angle of −600° lie?
- Quadrant I
- Quadrant II
- Quadrant III
- Quadrant IV
Show answer
Answer: B. Add 2 × 360°: −600° + 720° = 120°, which lies between 90° and 180°, so the angle is in quadrant II.
-
4. What is (sec²θ − 1)(cosec²θ − 1) equal to, wherever it is defined?
- 0
- tan²θ
- sec²θ cosec²θ
- 1
Show answer
Answer: D. sec²θ − 1 = tan²θ and cosec²θ − 1 = cot²θ, so the product is tan²θ cot²θ = 1.
-
5. What is 32.45° in degrees and minutes?
- 32°45′
- 32°27′
- 32°4.5′
- 32°30′
Show answer
Answer: B. 0.45° × 60 = 27′, so 32.45° = 32°27′. (32°45′ would be 32.75°.)
Sign in to keep track of the lessons you finish.