Revision notes

Chapter 3 Trigonometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Angles, basic identities and radian measure

Three systems of measuring angles
SystemBasic unitSubdivisions
Sexagesimal (degrees)a right angle = 90°1° = 60′ (minutes), 1′ = 60″ (seconds)
Centesimal (grades)a right angle = 100ᵍ1ᵍ = 100 minutes, 1 minute = 100 seconds
Circular (radians)an arc equal to the radius1 complete rotation = 2π radians
Exact values
θ0°30°45°60°90°
sin θ01/21/√2√3/21
cos θ1√3/21/√21/20
tan θ01/√31√3not defined

sin²θ + cos²θ = 1, sec²θ − tan²θ = 1, cosec²θ − cot²θ = 1

— Pythagorean identities
Common angles in both units
Degrees0°30°45°60°90°180°270°360°
Radians0π/6π/4π/3π/2π3π/22π

Converting between degrees and radians

  1. Degrees to radians multiply by π/180
  2. Radians to degrees multiply by 180/π
  3. In formulas use radians in s = rθ and ½r²θ

Key takeaways: anticlockwise angles are positive; coterminal angles differ by multiples of 360° (or 2π); the Pythagorean identities prove most identities; π radians = 180°; and s = rθ and A = ½r²θ need θ in radians.

Read the full lesson

Lesson 2

Trigonometric functions of any angle: signs, allied angles, periodicity and symmetry

Quadrantal angles
θPointcos θsin θtan θ
0(1, 0)100
π/2(0, 1)01not defined
π(−1, 0)−100
3π/2(0, −1)0−1not defined
2π(1, 0)100

The ASTC rule, quadrant by quadrant

  1. Quadrant I: All x > 0, y > 0, every function positive
  2. Quadrant II: Sine x < 0, y > 0, sin and cosec positive
  3. Quadrant III: Tangent x < 0, y < 0, tan and cot positive
  4. Quadrant IV: Cosine x > 0, y < 0, cos and sec positive

Then back to step 1: Quadrant I: All

Allied angles
Anglesincostan
−θ−sin θcos θ−tan θ
π/2 − θcos θsin θcot θ
π/2 + θcos θ−sin θ−cot θ
π − θsin θ−cos θ−tan θ
π + θ−sin θ−cos θtan θ
3π/2 − θ−cos θ−sin θcot θ
3π/2 + θ−cos θsin θ−cot θ
2π − θ−sin θcos θ−tan θ
2π + θsin θcos θtan θ

For π ± θ and 2π ± θ the function keeps its name; for π/2 ± θ and 3π/2 ± θ it changes to its co-function (sin ↔ cos, tan ↔ cot, sec ↔ cosec). The sign is the sign of the original function in the quadrant where the angle lies (ASTC).

— Working rule for allied angles

Key takeaways: sin θ = y/r and cos θ = x/r for any angle; the point on the unit circle is (cos θ, sin θ); ASTC gives the signs; allied angles reduce any angle to an acute one; sin, cos, sec, cosec have period 2π and tan, cot have period π; and cos is even while sin is odd.

Read the full lesson

Lesson 3

Compound, multiple and sub-multiple angle identities

Sum and difference identities
FormulaExpansion
cos(α ± β)cos α cos β ∓ sin α sin β
sin(α ± β)sin α cos β ± cos α sin β
tan(α + β)(tan α + tan β)/(1 − tan α tan β)
tan(α − β)(tan α − tan β)/(1 + tan α tan β)
cot(α + β)(cot α cot β − 1)/(cot α + cot β)
Multiple-angle identities
sinecosinetangent
sin 2A = 2 sin A cos Acos 2A = cos²A − sin²Atan 2A = 2 tan A/(1 − tan²A)
sin 2A = 2 tan A/(1 + tan²A)cos 2A = 2 cos²A − 1 = 1 − 2 sin²Atan 3A = (3 tan A − tan³A)/(1 − 3 tan²A)
sin 3A = 3 sin A − 4 sin³Acos 2A = (1 − tan²A)/(1 + tan²A)
cos 3A = 4 cos³A − 3 cos A

sin²A = (1 − cos 2A)/2, cos²A = (1 + cos 2A)/2, tan²A = (1 − cos 2A)/(1 + cos 2A)

— Power-reducing identities

Key takeaways: every compound-angle formula comes from cos(α + β); a cos t + b sin t = √(a² + b²) cos(t − α); double angles come from α = β, triple angles from 2A + A, half angles from A = θ/2; choose the sign of a half-angle root from its quadrant; and sin 18° = (√5 − 1)/4.

Read the full lesson

Lesson 4

Product–sum identities, conditional identities and trigonometric equations

Product-to-sum identities
ProductSum
2 sin A cos Bsin(A + B) + sin(A − B)
2 cos A sin Bsin(A + B) − sin(A − B)
2 cos A cos Bcos(A + B) + cos(A − B)
2 sin A sin Bcos(A − B) − cos(A + B)

sin C + sin D = 2 sin((C + D)/2) cos((C − D)/2); sin C − sin D = 2 cos((C + D)/2) sin((C − D)/2); cos C + cos D = 2 cos((C + D)/2) cos((C − D)/2); cos C − cos D = 2 sin((C + D)/2) sin((D − C)/2)

— Sum-to-product identities
General solutions
EquationGeneral solution (n ∈ Z)
sin θ = 0θ = nπ
cos θ = 0θ = (2n + 1)π/2
tan θ = 0θ = nπ
sin θ = sin α, α ∈ [−π/2, π/2]θ = nπ + (−1)ⁿα
cos θ = cos α, α ∈ [0, π]θ = 2nπ ± α
tan θ = tan α, α ∈ (−π/2, π/2)θ = nπ + α

Strategy for a trigonometric equation

  1. Simplify use identities to get one function, or a product equal to 0
  2. Split set each factor to zero; discard impossible ones like cos x = 3/2
  3. Reduce to a standard form sin θ = sin α, cos θ = cos α or tan θ = tan α
  4. Write the general solution then list solutions in a given interval if asked
  5. Check especially after squaring or dividing by an expression that might be 0

Key takeaways: product-to-sum and sum-to-product come from adding sum and difference formulas; when A + B + C = π, replace A + B by π − C; principal values of sin and tan lie in [−π/2, π/2] and of cos in [0, π]; the general solutions are nπ + (−1)ⁿα, 2nπ ± α and nπ + α; and a cos θ + b sin θ = c needs |c| ≤ √(a² + b²).

Read the full lesson

Lesson 5

Properties of triangles, solving triangles and inverse trigonometric functions

a/sin A = b/sin B = c/sin C = 2R

— Law of sines

a² = b² + c² − 2bc cos A, b² = c² + a² − 2ca cos B, c² = a² + b² − 2ab cos C; equivalently cos A = (b² + c² − a²)/(2bc)

— Law of cosines
Choosing a method
GivenMethodNumber of triangles
SAA (a side and two angles)third angle, then law of sinesone
SSS (three sides)law of cosines, largest angle firstone, if each side is less than the sum of the others
SAS (two sides, included angle)law of cosines, then the restone
SSA (two sides, a non-included angle)law of sines; check the ambiguous casenone, one or two
AAA (three angles)not enough: no side is knowninfinitely many similar triangles
Inverse trigonometric functions
FunctionDomain of the inverseRange (principal values)
sin⁻¹x[−1, 1][−π/2, π/2]
cos⁻¹x[−1, 1][0, π]
tan⁻¹xR(−π/2, π/2)
cot⁻¹xR(0, π)
sec⁻¹xR − (−1, 1)[0, π] − {π/2}
cosec⁻¹xR − (−1, 1)[−π/2, π/2] − {0}

Key takeaways: a/sin A = 2R; use cosines for SSS and SAS and find the largest angle first; Δ = ½ab sin C, or Heron's formula when three sides are known; SSA may give none, one or two triangles, decided by h = b sin A; and inverse trigonometric functions take values only in their principal ranges.

Read the full lesson

Privacy · Terms · Refunds · Delivery