• Practice
  • About 18 min
  • 5 practice questions

Locus of a point

Understand a locus as the path of a moving point, and find the equation of a locus from a geometric condition or from parametric coordinates by eliminating the parameter.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what a locus is and recognise standard loci such as a perpendicular bisector, an angle bisector and a circle.
  • Follow the four-step procedure to find the equation of a locus.
  • Turn a distance condition into an equation in x and y.
  • Eliminate a parameter from coordinates such as (2t², 4t) or (2 tan θ, 3 sec θ).
  • Find the locus of a point linked to a sliding rod.

Analytical geometry, founded independently by René Descartes and Pierre de Fermat in the 1630s, describes curves by equations. Its first idea is the locus: the path traced by a point that moves according to a rule. The Tamil Nadu textbook gives examples such as the path of a cricket ball tracked for a review and the cycloid traced by a point on the rim of a rolling wheel.

What a locus is

A point is a position, written as an ordered pair (x, y). The locus of a point is the path traced out by it when it moves under given conditions; the plural is loci. The equation of the locus is the relation satisfied by the coordinates of every point on the path and by no other point.

Three standard loci
Condition on the moving point PLocus
Equidistant from two fixed points A and BThe perpendicular bisector of AB
Equidistant from two intersecting linesThe bisectors of the angles between them
At a fixed distance r from a fixed point OA circle with centre O and radius r

Procedure for the equation of a locus

  1. Name the moving point P(h, k) Use h and k so they are not confused with the x, y of other points.
  2. Write the condition as an equation Use the distance formula, slopes, the section formula or the given coordinates.
  3. Eliminate any parameter The final relation must contain only h, k and known constants.
  4. Replace h by x and k by y The result is the equation of the locus.

Worked example 1: equidistant from two points

Find the locus of a point equidistant from A(2, 1) and B(6, 3). Let P(h, k). Then PA² = PB²: (h − 2)² + (k − 1)² = (h − 6)² + (k − 3)². Expanding and cancelling h² and k²: −4h + 4 − 2k + 1 = −12h + 36 − 6k + 9, so 8h + 4k − 40 = 0, that is 2h + k − 10 = 0. The locus is 2x + y − 10 = 0. Check: the midpoint (4, 2) of AB gives 8 + 2 − 10 = 0, and the slope of the locus, −2, times the slope of AB, 1/2, is −1, so the locus is the perpendicular bisector, as expected.

Worked example 2: a distance from a point and a line

Find the locus of a point whose distance from (2, 0) equals its distance from the y-axis. The distance of P(h, k) from the y-axis is |h|. So (h − 2)² + k² = h², which gives h² − 4h + 4 + k² = h², that is k² = 4h − 4. The locus is y² = 4(x − 1), a curve you will meet as a parabola in Class 12.

Eliminating a parameter

Often the coordinates of the moving point are given in terms of a third variable, a parameter such as t or θ. Each value of the parameter gives one point of the path. To find the locus, eliminate the parameter. With trigonometric parameters, use the identities sin²θ + cos²θ = 1, sec²θ − tan²θ = 1 and cosec²θ − cot²θ = 1.

Worked example 3: three parametric points

(i) P = (2t², 4t). From k = 4t, t = k/4; then h = 2(k/4)² = k²/8. The locus is y² = 8x. (ii) P = (2 tan θ, 3 sec θ). Then h/2 = tan θ and k/3 = sec θ, and sec²θ − tan²θ = 1 gives y²/9 − x²/4 = 1. (iii) P = (t + 1/t, t − 1/t), t ≠ 0. Adding and subtracting, h + k = 2t and h − k = 2/t, so (h + k)(h − k) = 4. The locus is x² − y² = 4.

Worked example 4: a point on a sliding rod

A rod AB of length 10 units slides with A on the x-axis and B on the y-axis. Find the locus of the point P that divides AB internally in the ratio 1 : 2. Let A = (a, 0) and B = (0, b), so a² + b² = 100. By the section formula P = ((2a + 1 × 0)/3, (2 × 0 + 1 × b)/3) = (2a/3, b/3). So a = 3h/2 and b = 3k. Substituting, 9h²/4 + 9k² = 100, that is 9h² + 36k² = 400. The locus is 9x² + 36y² = 400. Check: when B is at the origin, a = 10, P = (20/3, 0), and 9 × 400/9 = 400.

Worked example 5: a locus that is two lines

Find the locus of a point whose distance from the x-axis is twice its distance from the y-axis. The condition is |k| = 2|h|, so k² = 4h². The locus is y² = 4x², which splits as y = 2x or y = −2x: a pair of straight lines through the origin, a kind of equation studied in the last lesson of this chapter.

Call the moving point (h, k), write the condition, eliminate the parameter, then replace h by x and k by y.

— Finding a locus

Key takeaways: a locus is the path of a moving point and its equation is satisfied by every point of the path; square both sides of a distance equation to remove the root; eliminate parameters by solving for them or by a trigonometric identity; and check the answer with one point you can find directly.

Check your understanding

  1. 1. What is the locus of a point equidistant from (0, 0) and (4, 0)?

    1. y = 2
    2. x = 2
    3. x = 4
    4. x² + y² = 4
    Show answer

    Answer: B. h² + k² = (h − 4)² + k² gives 0 = −8h + 16, so h = 2. The locus is the line x = 2, the perpendicular bisector of the segment from (0, 0) to (4, 0).

  2. 2. What is the locus of the point (2 sec θ, 2 tan θ) as θ varies?

    1. x² + y² = 4
    2. y² − x² = 4
    3. xy = 4
    4. x² − y² = 4
    Show answer

    Answer: D. x/2 = sec θ and y/2 = tan θ. Since sec²θ − tan²θ = 1, x²/4 − y²/4 = 1, that is x² − y² = 4.

  3. 3. What is the locus of the point (t, 1/t), where t ≠ 0?

    1. xy = 1
    2. x = y
    3. x² + y² = 1
    4. y = 1/x²
    Show answer

    Answer: A. Here x = t and y = 1/t, so xy = t × (1/t) = 1 for every t.

  4. 4. A point moves so that its distance from the origin is always 3. What is the equation of its locus?

    1. x + y = 3
    2. x² + y² = 3
    3. x² + y² = 9
    4. x² − y² = 9
    Show answer

    Answer: C. √(h² + k²) = 3; squaring gives h² + k² = 9. The locus is the circle x² + y² = 9. Writing x² + y² = 3 forgets to square the 3.

  5. 5. A point moves so that it is always 3 units from the x-axis. Which equation describes its locus?

    1. x = 3
    2. y² = 9
    3. x² = 9
    4. x² + y² = 9
    Show answer

    Answer: B. The distance of (h, k) from the x-axis is |k|, so |k| = 3 and k² = 9. The locus y² = 9 is the pair of lines y = 3 and y = −3.

Privacy · Terms · Refunds · Delivery