Revision notes

Chapter 6 Two Dimensional Analytical Geometry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Locus of a point

Three standard loci
Condition on the moving point PLocus
Equidistant from two fixed points A and BThe perpendicular bisector of AB
Equidistant from two intersecting linesThe bisectors of the angles between them
At a fixed distance r from a fixed point OA circle with centre O and radius r

Procedure for the equation of a locus

  1. Name the moving point P(h, k) Use h and k so they are not confused with the x, y of other points.
  2. Write the condition as an equation Use the distance formula, slopes, the section formula or the given coordinates.
  3. Eliminate any parameter The final relation must contain only h, k and known constants.
  4. Replace h by x and k by y The result is the equation of the locus.

Call the moving point (h, k), write the condition, eliminate the parameter, then replace h by x and k by y.

— Finding a locus

Key takeaways: a locus is the path of a moving point and its equation is satisfied by every point of the path; square both sides of a distance equation to remove the root; eliminate parameters by solving for them or by a trigonometric identity; and check the answer with one point you can find directly.

Read the full lesson

Lesson 2

Straight lines: slope, intercepts and the standard forms

Which form for which data
Data givenFormEquation
Slope m, y-intercept bSlope-intercepty = mx + b
Slope m, point (x₁, y₁)Point-slopey − y₁ = m(x − x₁)
Two pointsTwo-point(y − y₁)/(y₂ − y₁) = (x − x₁)/(x₂ − x₁)
Intercepts a and b (both non-zero)Interceptx/a + y/b = 1
Length p of the perpendicular from O, its angle αNormalx cos α + y sin α = p
Point (x₁, y₁), inclination θParametric(x − x₁)/cos θ = (y − y₁)/sin θ = r
Any lineGeneralax + by + c = 0

Choosing a form

  • A point is known
    • With a slope: point-slope
    • With a second point: two-point
    • With an inclination and distances along the line: parametric
  • Intercepts are known
    • Both: intercept form
    • y-intercept with slope: slope-intercept
  • The perpendicular from O is known
    • Its length p and angle α: normal form

Key takeaways: slope is tan θ, rise over run, or −a/b; equal slopes show collinearity; pick the form that matches the data; the normal form uses the perpendicular from the origin; and the parametric form gives points at a chosen distance along the line.

Read the full lesson

Lesson 3

Angle between lines, parallel and perpendicular lines

tan φ = |(m₂ − m₁)/(1 + m₁m₂)|. Parallel: m₁ = m₂ (a₁b₂ = a₂b₁). Perpendicular: m₁m₂ = −1 (a₁a₂ + b₁b₂ = 0).

— Angle between two lines

Parallel or perpendicular?

  • Parallel
    • m₁ = m₂
    • a₁b₂ = a₂b₁
    • Family: ax + by = k
    • Angle 0°
  • Perpendicular
    • m₁m₂ = −1 (neither line vertical)
    • a₁a₂ + b₁b₂ = 0
    • Family: bx − ay = k
    • Angle 90°

Key takeaways: read slopes as −A/B; the acute angle comes from the absolute value of (m₂ − m₁)/(1 + m₁m₂); parallel lines keep a and b and change only the constant; perpendicular lines swap a and b and change one sign; and the sign of ax₁ + by₁ + c compared with c tells you the side of the line.

Read the full lesson

Lesson 4

Distances, angle bisectors and families of lines

Distance from (x₁, y₁) to ax + by + c = 0 is |ax₁ + by₁ + c|/√(a² + b²). Distance between ax + by + c₁ = 0 and ax + by + c₂ = 0 is |c₁ − c₂|/√(a² + b²).

— Distance formulas

Families of lines

  • Fixed y-intercept, slope varies
    • y = mx + b, b fixed
    • Lines through (0, b)
  • Fixed slope, intercept varies
    • ax + by + λ = 0
    • All parallel to ax + by + c = 0
  • Perpendicular family
    • bx − ay + λ = 0
  • Through an intersection
    • L₁ + λL₂ = 0
    • Find λ from one more condition

Key takeaways: distance from a point to a line is |ax₁ + by₁ + c|/√(a² + b²); make a and b match before using the parallel-lines formula; foot and image come from the same ratio with −t and −2t; for bisectors, make constants positive and use the sign of a₁a₂ + b₁b₂; and pick a member of a family by using the one extra condition.

Read the full lesson

Lesson 5

Pair of straight lines

For ax² + 2hxy + by² = 0: tan θ = |2√(h² − ab)/(a + b)|. Coincident: h² = ab. Perpendicular: a + b = 0. Bisectors: (x² − y²)/(a − b) = xy/h.

— Pair of lines through the origin

ax² + 2hxy + by² + 2gx + 2fy + c = 0 represents a pair of straight lines if abc + 2fgh − af² − bg² − ch² = 0.

— Condition for a pair of lines

Separating a general pair

  1. Check the condition abc + 2fgh − af² − bg² − ch² = 0 (find an unknown constant from it).
  2. Factorise the second-degree part ax² + 2hxy + by² = (l₁x + m₁y)(l₂x + m₂y).
  3. Add unknown constants Write (l₁x + m₁y + p)(l₂x + m₂y + q).
  4. Compare x, y and constant terms Solve two equations for p and q; the third checks them.

Key takeaways: a homogeneous second-degree equation is a pair of lines through the origin with m₁ + m₂ = −2h/b and m₁m₂ = a/b; tan θ = |2√(h² − ab)/(a + b)|, with a + b = 0 for perpendicular lines and h² = ab for coincident ones; the bisectors are (x² − y²)/(a − b) = xy/h; and a general second-degree equation is a pair of lines only when abc + 2fgh − af² − bg² − ch² = 0.

Read the full lesson

Privacy · Terms · Refunds · Delivery