- Practice
- About 30 min
- 5 practice questions
Projectile motion and circular motion
Analyse horizontal and oblique projectiles (path, time of flight, range, maximum height, velocity), relate radians and degrees, and describe circular motion with angular velocity, v = rω, centripetal and tangential acceleration and the angular kinematic equations.
If something looks wrong, please tell us.
By the end of this lesson you can
- Show that a projectile's path is a parabola and find time of flight, range and landing speed for a horizontal projection.
- Use h_max = u²sin²θ/2g, T_f = 2u sin θ/g and R = u² sin 2θ/g, and explain why 45° gives maximum range.
- Convert between degrees and radians and define angular displacement, angular velocity and angular acceleration.
- Use v = rω, a_t = rα and the centripetal acceleration a_c = v²/r = ω²r, and combine accelerations in non-uniform circular motion.
- Apply ω = ω₀ + αt, θ = ω₀t + ½αt² and ω² = ω₀² + 2αθ.
A cricket ball hit towards the boundary, water from a hose held at an angle, or the 'pull' struck in the Tamil Nadu game kitti pull all follow curved paths. A projectile is a body thrown with some initial velocity and then left to move under gravity alone; its path is its trajectory. Assume no air resistance, a flat non-rotating Earth and constant g.
The key idea
A projectile combines two independent motions: a uniform velocity horizontally (no horizontal acceleration) and a uniformly accelerated motion vertically (acceleration g downwards). We apply the kinematic equations separately along x and y, using only the time t to link them.
Horizontal projection
A ball is thrown horizontally with speed u from a height h. Take +x horizontal and +y downwards. Horizontally: x = ut. Vertically: u_y = 0, a = g, so y = ½gt². Eliminating t = x/u gives y = (g/2u²)x², of the form y = Kx²: a parabola.
- Time of flight: h = ½gT², so T = √(2h/g). It does not depend on u: a ball dropped and a ball thrown horizontally from the same height land together.
- Horizontal range: R = uT = u√(2h/g).
- Velocity at time t: v = u î + gt ĵ, speed √(u² + g²t²).
- Speed on landing: vₓ = u and v_y = gT = √(2gh), so v = √(u² + 2gh).
Worked example 1: thrown off a cliff
A stone is thrown horizontally at 15 m s⁻¹ from a cliff 80 m high (take g = 10 m s⁻²). T = √(2 × 80/10) = √16 = 4 s. R = 15 × 4 = 60 m. On landing, vₓ = 15 m s⁻¹ and v_y = 10 × 4 = 40 m s⁻¹, so v = √(225 + 1600) = √1825 ≈ 42.7 m s⁻¹, at tan⁻¹(40/15) ≈ 69° below the horizontal.
Oblique (angular) projection
A body is projected with speed u at angle θ above the horizontal. Its initial velocity components are uₓ = u cos θ and u_y = u sin θ. Horizontally, vₓ = u cos θ stays constant and x = (u cos θ)t. Vertically, v_y = u sin θ − gt and y = (u sin θ)t − ½gt². Substituting t = x/(u cos θ): y = x tan θ − gx²/(2u² cos²θ), an inverted parabola.
- Maximum height (v_y = 0 at the top): 0 = u² sin²θ − 2gh_max, so h_max = u² sin²θ/2g.
- Time of flight (y = 0 again): 0 = (u sin θ)T − ½gT², so T_f = 2u sin θ/g.
- Range: R = (u cos θ) × T_f = 2u² sin θ cos θ/g = u² sin 2θ/g.
- Maximum range: sin 2θ = 1 when θ = 45°, giving R_max = u²/g. Angles θ and 90° − θ give the same range, since sin 2θ = sin(180° − 2θ).
Oblique projectile: h_max = u² sin²θ/2g; T_f = 2u sin θ/g; R = u² sin 2θ/g; R_max = u²/g at 45°.
Worked example 2: a long hit
A ball is struck at 24 m s⁻¹ at 30° above the horizontal (g = 9.8 m s⁻²). Maximum height: h_max = 24² × sin²30°/(2 × 9.8) = 576 × 0.25/19.6 = 144/19.6 ≈ 7.35 m. Time of flight: T_f = 2 × 24 × 0.5/9.8 = 24/9.8 ≈ 2.45 s. Range: R = 576 × sin 60°/9.8 = 576 × 0.866/9.8 = 498.8/9.8 ≈ 50.9 m. A fielder 55 m away cannot be reached on the full, but at 45° the same hit would carry R_max = 576/9.8 ≈ 58.8 m. Because R ∝ 1/g, the same throw on the Moon (where g is about one-sixth of the Earth's) would go about six times as far.
Degrees, radians and angular quantities
A full circle is 360° = 2π rad, so π rad = 180° and 1 rad ≈ 57.3°. (π is irrational; 3.14 and 22/7 are only approximations.) For a particle moving on a circle of radius r:
- Angular displacement θ = s/r (in radians), the angle swept about the centre; so s = rθ.
- Angular velocity ω = dθ/dt, in rad s⁻¹, directed along the axis by the right-hand rule.
- Angular acceleration α = dω/dt, in rad s⁻²; it need not point the same way as ω.
- Linear speed v = rω (in general v = ω × r), tangential to the circle.
- Tangential acceleration a_t = dv/dt = rα, along the velocity.
Worked example 3: angles and angular speed
(a) A bullock-cart wheel with 8 equally spaced spokes: the angle between neighbouring spokes is 2π/8 = π/4 rad = 45°. (b) The minute hand of a clock turns through 20 minutes' worth: θ = (20/60) × 2π = 2π/3 rad = 120°. (c) The Earth spins once in 24 h: ω = 2π/(24 × 3600 s) ≈ 7.27 × 10⁻⁵ rad s⁻¹. (d) The tip of a fan blade 0.60 m from the axis turning at 20 rad s⁻¹ moves at v = rω = 0.60 × 20 = 12 m s⁻¹.
Uniform circular motion and centripetal acceleration
In uniform circular motion a body covers equal arcs in equal times: its speed is constant, but its velocity keeps changing direction, so it is accelerating. Let the position vector turn through a small angle θ in time Δt. Because the velocity is always perpendicular to the radius, it turns through the same angle. The triangles formed by r₁, r₂, Δr and by v₁, v₂, Δv are similar, so |Δv|/v = |Δr|/r. Dividing by Δt and letting Δt → 0 (|Δr|/Δt → v): a = v²/r, directed towards the centre. With v = rω, a = ω²r. This is the centripetal acceleration: its magnitude is constant, but its direction keeps changing.
In non-uniform circular motion (for example a bob whirled in a vertical circle) the speed changes too, so there are two perpendicular accelerations: centripetal a_c = v²/r towards the centre and tangential a_t along the velocity. The resultant is a_R = √(a_t² + (v²/r)²), at an angle θ to the radius with tan θ = a_t/(v²/r).
Uniform and non-uniform circular motion
-
Uniform
- Speed constant, velocity changes
- Only centripetal acceleration v²/r
- Acceleration always towards centre
-
Non-uniform
- Speed and direction both change
- Centripetal plus tangential acceleration
- Resultant at angle tan⁻¹(a_t r/v²) to the radius
Worked example 4: changing speed on a circle
A particle moves on a circle of radius 5 m with speed v = 2t m s⁻¹. At t = 3 s: v = 6 m s⁻¹, a_c = 36/5 = 7.2 m s⁻², a_t = dv/dt = 2 m s⁻². a_R = √(7.2² + 2²) = √(51.84 + 4) = √55.84 ≈ 7.47 m s⁻². tan θ = 2/7.2 = 0.278, so θ ≈ 15.5° from the radius.
Kinematic equations of circular motion
For constant angular acceleration, replace s by θ, u by ω₀, v by ω and a by α: ω = ω₀ + αt, θ = ω₀t + ½αt², ω² = ω₀² + 2αθ, θ = ½(ω₀ + ω)t. Like the linear equations, they hold only for constant α. Example: a wheel starts from rest with α = 3 rad s⁻². After 4 s, ω = 3 × 4 = 12 rad s⁻¹ and θ = ½ × 3 × 16 = 24 rad (about 24 × 57.3° ≈ 1375°, nearly 3.8 turns). Check: ω² = 144 and 2αθ = 2 × 3 × 24 = 144.
Key takeaways
- A projectile = uniform horizontal motion + uniformly accelerated vertical motion; its path is a parabola.
- Horizontal projection: T = √(2h/g), R = u√(2h/g); oblique: R = u² sin 2θ/g, maximum at 45°.
- θ = s/r, ω = dθ/dt, α = dω/dt, v = rω, a_t = rα.
- Centripetal acceleration v²/r = ω²r points to the centre; in non-uniform motion add the tangential part.
- Angular kinematic equations mirror the linear ones for constant α.
Check your understanding
-
1. A ball is thrown horizontally from a height of 20 m with a speed of 8 m s⁻¹ (g = 10 m s⁻²). Its horizontal range is:
- 8 m
- 16 m
- 20 m
- 32 m
Show answer
Answer: B. T = √(2h/g) = √(40/10) = 2 s. R = uT = 8 × 2 = 16 m.
-
2. Two projectiles are thrown with the same speed at 25° and 65° to the horizontal. Their ranges are:
- equal
- in the ratio 25 : 65
- in the ratio 65 : 25
- equal only on the Moon
Show answer
Answer: A. R = u² sin 2θ/g. sin 50° = sin 130°, so complementary angles (θ and 90° − θ) give equal ranges.
-
3. At the highest point of an oblique projectile's path:
- the velocity is zero
- the acceleration is zero
- the velocity is horizontal and equal to u cos θ
- the speed is maximum
Show answer
Answer: C. The vertical component becomes zero at the top, but the horizontal component u cos θ never changes. The acceleration g still acts downwards, and the speed is least, not greatest, at the top.
-
4. A body moves uniformly in a circle of radius 2 m at 4 m s⁻¹. Its centripetal acceleration is:
- 2 m s⁻²
- 4 m s⁻²
- 16 m s⁻²
- 8 m s⁻²
Show answer
Answer: D. a_c = v²/r = 16/2 = 8 m s⁻², directed towards the centre.
-
5. A disc starts from rest with a constant angular acceleration of 2 rad s⁻². The angle it turns through in the first 5 s is:
- 25 rad
- 10 rad
- 50 rad
- 5 rad
Show answer
Answer: A. θ = ω₀t + ½αt² = 0 + ½ × 2 × 25 = 25 rad.
Sign in to keep track of the lessons you finish.