- Practice
- About 17 min
- 5 practice questions
Water, wind and fire, and the soil as an edaphic factor
Describe how water, salinity, wind and fire affect plants, then explain soil formation, soil texture, soil water, soil pH and the horizons of a soil profile.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify organisms as euryhaline or stenohaline and explain the albedo effect.
- List the effects of wind and of the three kinds of fire on vegetation.
- Describe how soil forms and compare clayey, silt, loamy and sandy soils.
- Use the terms holard, chresard and echard and name the horizons of a soil profile.
Two farms a few kilometres apart can give very different harvests. One may have loamy soil that drains well and holds enough water; the other may be sandy and dry out within days. Beyond soil, water supply, wind and fire also decide which plants survive. This lesson completes the climatic factors and then turns to the soil itself.
Water and salinity
Water affects every vital process, and life itself is believed to have begun in water. Plants get water as atmospheric moisture, precipitation and soil water, and the amount of rain decides forest type: evergreen forests where heavy rain falls all year, sclerophyllous forests where rain is heavy in winter and low in summer. For aquatic organisms the salt content matters too. Salinity is measured in parts per thousand (‰): roughly 0.5 ‰ in fresh inland water, 30-35 ‰ in sea water and over 100 ‰ in hypersaline lagoons. Organisms that tolerate a wide range of salinity are euryhaline (the textbook cites marine algae and marine angiosperms); those that tolerate only a narrow range are stenohaline.
Wind and the albedo effect
Wind is air in motion, measured with an anemometer. According to the textbook, air is about 78% nitrogen, 21% oxygen, 0.03% carbon dioxide and 0.93% argon and other gases, carrying water vapour, dust, pollen, spores and pollutants. Wind helps form rain, makes waves that aerate water, increases transpiration, carries pollen of anemophilous plants and disperses seeds and spores. Strong wind erodes fertile soil and can uproot trees, and wind blowing steadily from one direction produces lopsided flag forms in trees. Dust and tiny suspended particles called aerosols (from industry, vehicles, forest fires, sulphur dioxide and dimethyl sulphide) reflect incoming sunlight back to space. This is the albedo effect: it cools the region and can reduce photosynthesis and respiration.
Fire
Fire is an exothermic process of combustion. It is mostly caused by people, though friction between trees can start it naturally. Ground fire is flameless and below the surface, surface fire burns herbs and shrubs, and crown fire burns the forest canopy. Fire kills plants directly, leaves burn scars through which fungi and insects enter, and changes light, nutrient cycling, soil pH and soil life. Fungi that grow on burnt soil are pyrophilous (Pyronema confluens); Pteris (a fern) and Pyronema are indicators of fire. A fire break is a gap in vegetation that slows or stops a fire; rivers and lakes act as natural fire breaks. Trees defend themselves with rhytidome, the outer bark of many layers of suberised periderm, cortex and phloem that shields the stem from fire, water loss, insects and microbes.
Some plants tolerate toxic metals. The textbook notes that soyabean and tomato isolate cadmium in a few cells, while rice and water hyacinth (Eichhornia) bind it to proteins. Using such plants to remove a pollutant from soil is phytoremediation.
Edaphic factors: the soil
Edaphic factors are the physical and chemical properties of soil; the study of soil is pedology and soil formation is pedogenesis. Soil begins with weathering of rock; in biological weathering, bacteria, fungi, lichens and plants release acids that break rock down. Soils formed where the rock lay are residual soils; those carried elsewhere by water, wind or ice are transported soils. Soil water mostly comes from rain. The total water in soil is holard, the part plants can use is chresard and the part they cannot is echard. Capillary water, held in the fine pores between particles, is the main water available to plants. Soil pH decides how available nutrients are; the textbook gives 5.5-6.8 as the best range for crops.
| Soil type | Particle size | Notes |
|---|---|---|
| Clayey | less than 0.002 mm | Heavy, cold soil; holds water but drains poorly |
| Silt | 0.002-0.02 mm | Mostly silt with a little sand |
| Loamy | a mixture from 0.002 to 2 mm | Garden soil; about 70% sand with 30% clay or silt; ideal for crops |
| Sandy | 0.2-2 mm | Light soil; drains fast, holds little water |
Plants are also named by the soil they live on: halophytes (saline soil), psammophytes (sand), lithophytes (rock surfaces), chasmophytes (rock crevices), cryptophytes (below the soil surface), cryophytes (ice surfaces), oxylophytes (acidic soil) and calciphytes (calcium-rich alkaline soil).
Soil profile: horizons from top to bottom
-
O horizon (organic)
- O1: freshly fallen leaves and twigs
- O2: decomposed remains (humus)
- Usually absent in farmland and deserts
-
A horizon (topsoil, leached)
- A1: dark, rich in organic matter
- A2: lighter, larger mineral particles
-
B horizon (subsoil, accumulation)
- Poor in humus, rich in iron, aluminium and silica clays
-
C horizon (partly weathered rock)
- Parent material, little or no life
-
R horizon (bedrock)
- Parent rock above groundwater
Worked example 1: holard, chresard, echard
In a made-up soil sample, total water is 32 g per 100 g of soil, and 9 g of it is held so tightly that roots cannot take it up. Find the water available to plants. Reasoning: holard = 32 g; echard = 9 g; chresard = holard − echard = 32 − 9 = 23 g per 100 g of soil. Check: 23 + 9 = 32.
Worked example 2: why sandy soil is poor for crops
Sandy particles are large (0.2-2 mm), so the pores between them are large too. Water drains straight through under gravity, little capillary water stays, and dissolved nutrients wash away. Loam mixes large and small particles, so it both drains and holds water, and its pores still let air and roots in. Conclusion: sandy soil stays dry and infertile; loam is the cultivator's choice.
Holard = chresard + echard. Capillary water is the water roots use.
Key takeaways: salinity divides organisms into euryhaline and stenohaline; wind and aerosols shape climate and vegetation; fire kills but also leaves indicators and provokes defences such as rhytidome. Soil forms by weathering, varies in texture and water holding, and is layered into O, A, B, C and R horizons.
Check your understanding
-
1. Water in the soil that is available to plants is called:
- Holard
- Echard
- Chresard
- Hygroscopic water
Show answer
Answer: C. Chresard is the available water. Holard is the total water content, and echard (which includes tightly held hygroscopic water) is the part roots cannot absorb.
-
2. Reflection of incoming solar radiation by aerosols, which cools a region, is called:
- Greenhouse effect
- Albedo effect
- Edge effect
- Thermal stratification
Show answer
Answer: B. Aerosols and dust reflect sunlight back to space: the albedo effect, which lowers temperature. The greenhouse effect traps heat instead; edge effect and stratification are unrelated ideas.
-
3. A forest fire burns only the herbs and shrubs on the forest floor. This is a:
- Crown fire
- Ground fire
- Fire break
- Surface fire
Show answer
Answer: D. A surface fire consumes herbs and shrubs. A ground fire is flameless and below the surface, a crown fire burns the canopy, and a fire break is a gap that stops fire.
-
4. Why is an organic (O) horizon usually absent in desert soils?
- Little vegetation grows, so little litter falls and accumulates
- Ploughing buries all the organic matter
- Too much rain washes it away every year
- Desert soils have no mineral particles
Show answer
Answer: A. The O horizon is built from fallen leaves and other remains. Deserts support sparse vegetation, so hardly any litter collects. Ploughing explains its absence in farmland, not deserts.
-
5. A soil sample holds 40 g of water in total, of which 28 g is available to plants. How much is echard?
- 68 g
- 28 g
- 12 g
- 40 g
Show answer
Answer: C. Holard = chresard + echard, so echard = 40 − 28 = 12 g. Check: 28 + 12 = 40.
Sign in to keep track of the lessons you finish.