- Practice
- About 25 min
- 5 practice questions
Amino acids, proteins and enzymes
Classify α-amino acids, explain zwitterions and the isoelectric point, form peptide bonds, describe the four levels of protein structure and denaturation, and outline how enzymes work.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write the general formula of an α-amino acid and classify amino acids in several ways.
- Explain zwitterions, amphoteric behaviour and the isoelectric point.
- Show how peptide bonds form and count the possible peptides.
- Describe primary, secondary, tertiary and quaternary structure, denaturation, and the enzyme-substrate mechanism.
Proteins (from a Greek word meaning 'holding first place') are the most abundant biomolecules and the working parts of every cell: they catalyse reactions, carry molecules, give structure and send signals. All proteins are polymers of α-amino acids.
α-Amino acids
An α-amino acid has an –NH₂ group and a –COOH group on the same carbon, the α-carbon: H₂N–CH(R)–COOH. About 20 α-amino acids are commonly found in proteins; each has a name, a three-letter code (such as Gly, Ala) and a one-letter code. They differ in the side chain R.
- By side chain: acidic, basic or neutral; also polar or non-polar (hydrophobic).
- By diet: non-essential amino acids can be made in the body (the textbook lists Gly, Ala, Glu, Asp, Gln, Asn, Ser, Cys, Tyr, Pro); essential ones must come from food (Phe, Val, Thr, Trp, Ile, Met, His, Arg, Leu, Lys, remembered as PVT TIM HALL).
- Non-protein amino acids, such as ornithine and citrulline in the urea cycle, occur in cells but not in proteins.
Zwitterions and the isoelectric point
Amino acids are colourless, water-soluble crystalline solids with high melting points, unlike ordinary amines and acids. In water the –COOH gives its proton to the –NH₂, forming a zwitterion, ⁺H₃N–CH(R)–COO⁻, which carries both charges but is neutral overall. Amino acids are amphoteric: in acid the –COO⁻ takes up H⁺ (net charge +1); in alkali the –NH₃⁺ loses H⁺ (net charge −1). The pH at which the net charge is zero is the isoelectric point; below it the amino acid is positive, above it negative.
Forms of an amino acid as the pH rises
- Acidic solution ⁺H₃N–CHR–COOH, net charge +1
- Isoelectric point ⁺H₃N–CHR–COO⁻, zwitterion, net charge 0
- Alkaline solution H₂N–CHR–COO⁻, net charge −1
Except glycine (R = H), every amino acid has a chiral α-carbon and is optically active. Living organisms use almost only L-amino acids to build proteins; D-amino acids are rare.
The peptide bond
The –COOH of one amino acid reacts with the –NH₂ of the next, losing water and forming an amide link, –CO–NH–, called the peptide bond. Two amino acids give a dipeptide, three a tripeptide, and so on; a chain of many is a polypeptide, and a large one with a function is a protein. The free –NH₂ end is the N-terminal, the free –COOH end the C-terminal, and sequences are written from N to C. The repeating N–C–C(=O) atoms form the backbone; the R groups stick out as side chains.
H₂N–CH₂–COOH + H₂N–CH(CH₃)–COOH → H₂N–CH₂–CO–NH–CH(CH₃)–COOH + H₂O (glycine + alanine → glycylalanine)
Worked example 1: dipeptide arithmetic
(a) Molar mass of glycylalanine. Glycine C₂H₅NO₂ = 24 + 5 + 14 + 32 = 75 g mol⁻¹; alanine C₃H₇NO₂ = 36 + 7 + 14 + 32 = 89 g mol⁻¹; one water (18) is lost: 75 + 89 − 18 = 146 g mol⁻¹. (b) How many different tripeptides contain glycine, alanine and valine once each? Any of the three can be first, either of the remaining two second, and the last is fixed: 3 × 2 × 1 = 6. Gly-Ala-Val and Val-Ala-Gly are different peptides, because the chain has a direction (N to C).
Classifying proteins by shape
Fibrous and globular proteins
-
Fibrous
- Long, thread-like molecules
- Usually insoluble in water
- Held by disulphide bridges and hydrogen bonds
- Structural: keratin, collagen
-
Globular
- Chains folded into a compact sphere
- Usually soluble in water
- Many functions, including catalysis
- Myoglobin, insulin, enzymes
Four levels of protein structure
- Primary: the sequence of amino acids joined by peptide bonds, for example H₂N–Gly–Met–Phe–Arg–Asp–Cys–COOH. Even one change can alter the whole structure and function.
- Secondary: regular local shapes held by hydrogen bonds between backbone C=O and N–H groups. In the right-handed α-helix, the C=O of residue n bonds to the N–H of residue n + 4; there are about 3.6 residues and 5.4 Å per turn, and side chains point outwards. Proline, with its rigid ring, causes a kink and is a 'helix breaker'. In β-strands, extended chains lie side by side and hydrogen-bond to neighbouring strands, forming a β-sheet.
- Tertiary: the whole chain, helices and sheets included, folds into a three-dimensional shape held by side-chain interactions: disulphide bridges between cysteines, ionic attractions, hydrophobic interactions, hydrogen bonds and van der Waals forces.
- Quaternary: several folded chains (subunits) fit together, held by the same forces. Haemoglobin has four chains; the textbook notes that DNA polymerase has ten.
Worked example 2: length of an α-helix
How long is an α-helix of 36 residues? Working: number of turns = 36 ÷ 3.6 = 10 turns; length = 10 × 5.4 Å = 54 Å (5.4 nm). Each residue therefore adds 5.4 ÷ 3.6 = 1.5 Å to the length of the helix.
Denaturation
Heat, chemicals such as urea, changes of pH or of ionic strength can break the weak interactions that hold a protein's shape. The protein loses its secondary, tertiary and quaternary structure, but its primary structure (the peptide bonds) stays intact. This is denaturation, and the protein loses its biological activity; egg white setting on heating is an example. Because the sequence survives, some proteins refold when normal conditions return, sometimes helped by proteins called chaperones.
Importance of proteins
- Enzymes catalyse the reactions of living systems; keratin and collagen give structure.
- Haemoglobin carries oxygen, kinesins move organelles, transporters move molecules across membranes, and ferritin stores iron.
- Antibodies fight disease; hormones such as insulin and glucagon control blood glucose; receptors detect signal molecules.
Enzymes and how they act
Enzymes are protein catalysts. They speed up reactions enormously (the textbook gives a factor of the order of 10⁵) and are highly specific, each catalysing one kind of reaction: carbonic anhydrase interconverts carbonic acid and CO₂ + water, sucrase hydrolyses sucrose to glucose and fructose, and lactase hydrolyses lactose to glucose and galactose. An enzyme lowers the activation energy by stabilising the transition state.
Enzyme action (lock and key)
- E + S The substrate fits the active site of the enzyme
- ES complex Enzyme-substrate complex forms reversibly
- Reaction The substrate is converted to product at the active site
- E + P Product leaves; the enzyme is free for another substrate
Key takeaways: amino acids exist as zwitterions and are amphoteric; at the isoelectric point the net charge is zero. Peptide bonds (–CO–NH–) link them from N- to C-terminal. Primary structure is the sequence; secondary is α-helix and β-sheet; tertiary is the folded chain; quaternary is the subunit assembly. Denaturation destroys all but the primary structure. Enzymes work through an enzyme-substrate complex.
Check your understanding
-
1. Which amino acid is NOT optically active?
- Alanine
- Valine
- Glycine
- Leucine
Show answer
Answer: C. In glycine, H₂N–CH₂–COOH, the α-carbon carries two hydrogens, so it is not chiral. Every other common amino acid has four different groups on its α-carbon.
-
2. An amino acid is placed in a solution whose pH is below its isoelectric point. What is its main form?
- H₂N–CHR–COO⁻ with net charge −1
- ⁺H₃N–CHR–COO⁻ with net charge 0
- H₂N–CHR–COOH, uncharged
- ⁺H₃N–CHR–COOH with net charge +1
Show answer
Answer: D. Below the isoelectric point there is excess H⁺, which protonates the –COO⁻ of the zwitterion, leaving the –NH₃⁺: the amino acid carries a net charge of +1 and moves towards the cathode.
-
3. Which level of protein structure is held mainly by hydrogen bonds between backbone C=O and N–H groups?
- Primary
- Secondary
- Tertiary
- Quaternary
Show answer
Answer: B. The α-helix and β-sheet of secondary structure are held by backbone hydrogen bonds (C=O of residue n with N–H of residue n + 4 in a helix). Primary structure is the covalent sequence; tertiary and quaternary depend mostly on side-chain interactions.
-
4. When egg white is boiled, which bonds are NOT broken?
- Peptide bonds
- Hydrogen bonds
- Hydrophobic interactions
- Ionic interactions between side chains
Show answer
Answer: A. Denaturation destroys the higher-order structure by breaking weak interactions, but the covalent peptide bonds of the primary structure remain intact.
-
5. A dipeptide is formed from alanine (89 g mol⁻¹) and valine (117 g mol⁻¹). What is its molar mass?
- 206 g mol⁻¹
- 224 g mol⁻¹
- 188 g mol⁻¹
- 170 g mol⁻¹
Show answer
Answer: C. Forming one peptide bond releases one molecule of water (18 g mol⁻¹): 89 + 117 − 18 = 188 g mol⁻¹.
Sign in to keep track of the lessons you finish.