- Practice
- About 15 min
- 5 practice questions
Imperfections in solids: point defects
Classify crystal defects, and explain Schottky, Frenkel, metal excess (F centres), metal deficiency and impurity defects with their effects on density, colour and conductivity.
If something looks wrong, please tell us.
By the end of this lesson you can
- Name the main classes of crystal defects and the kinds of point defects in ionic solids.
- Compare Schottky and Frenkel defects, including their effect on density.
- Explain F centres, the colour of heated ZnO and the formula FeₓO.
- Calculate cation vacancies produced by doping and the fraction of Fe³⁺ in a non-stoichiometric oxide.
No real crystal is perfect. The small errors in the arrangement of its particles, called defects or imperfections, change physical and chemical properties and are often useful. Doping silicon creates defects that increase its conductivity, and whether iron or nickel can be magnetised and demagnetised also depends on imperfections.
Crystal defects are commonly classified as point defects (at a single lattice site), line defects, surface (plane) defects and volume defects. This lesson, like the Tamil Nadu textbook, deals with point defects in ionic solids.
Point defects in ionic solids
-
Stoichiometric (intrinsic, thermodynamic)
- Schottky defect
- Frenkel defect
-
Non-stoichiometric
- Metal excess defect
- Metal deficiency defect
-
Impurity defects
- Foreign ions of different charge create vacancies
Stoichiometric defects
In these defects the ratio of cations to anions stays exactly as in the formula, and the crystal remains electrically neutral: a missing ion is balanced either by a missing ion of opposite charge or by the same ion sitting somewhere else.
| Feature | Schottky defect | Frenkel defect |
|---|---|---|
| What happens | Equal numbers of cations and anions are missing from their sites | An ion (usually the small cation) leaves its site and moves to an interstitial position |
| Ion sizes | Cation and anion of similar size | Cation much smaller than anion |
| Density | Decreases (mass is lost from the same volume) | Unchanged (nothing leaves the crystal) |
| Examples | NaCl, KCl, CsCl | AgBr, ZnS, AgCl |
Schottky vacancies also give a way for ions to move through the lattice. The textbook cites vanadium monoxide: density calculated from the unit cell 6.5 g cm⁻³, measured 5.6 g cm⁻³, so roughly (6.5 − 5.6)/6.5 ≈ 14% of sites are vacant. Note that AgBr shows both Frenkel and Schottky defects.
Worked example 1: percentage Schottky vacancies
(Made-up data) A crystal's density calculated from X-ray edge length is 2.20 g cm⁻³ but the measured density is 2.13 g cm⁻³. Working: mass lost per unit volume = 2.20 − 2.13 = 0.07 g cm⁻³. Fraction of ion pairs missing = 0.07 ÷ 2.20 = 0.0318, i.e. about 3.2% Schottky vacancies. A Frenkel defect would not show up this way, because density does not change.
Non-stoichiometric defects
Metal excess defect: there are more metal ions than the formula requires. Neutrality is kept either by anion vacancies holding electrons or by extra cations and electrons in interstitial sites. When NaCl crystals are heated in sodium vapour, Na atoms on the surface lose electrons to become Na⁺; Cl⁻ ions move out to the surface to join them, and the released electrons diffuse in and occupy the empty anion sites. An anion vacancy holding an unpaired electron is an F centre (from the German 'Farbe', colour). The F-centre electrons absorb visible light, so the crystal turns yellow; the formula becomes Na₁₊ₓCl.
Heated zinc oxide: ZnO is white when cold but yellow when hot. On heating it loses a little oxygen: ZnO → Zn²⁺ + ½O₂ + 2e⁻ (Zn 1 = 1, O 1 = 1, charge 0 = +2 − 2). The extra Zn²⁺ ions and electrons occupy interstitial sites, giving a metal excess defect.
Metal deficiency defect: there are fewer cations than the formula requires. It occurs when the metal can show more than one oxidation state. In iron(II) oxide some Fe²⁺ ions are missing; for every Fe²⁺ missing, two others become Fe³⁺, keeping the crystal neutral. The textbook gives the formula as FeₓO with x between about 0.93 and 0.98.
Worked example 2: Fe³⁺ in Fe₀.₉₅O
Let Fe²⁺ = y; then Fe³⁺ = 0.95 − y. Charge balance with one O²⁻: 2y + 3(0.95 − y) = 2. So 2y + 2.85 − 3y = 2, giving y = 0.85. Fe³⁺ = 0.95 − 0.85 = 0.10. Percentage of iron present as Fe³⁺ = 0.10 ÷ 0.95 × 100 = 10.5%. Check: 2(0.85) + 3(0.10) = 1.70 + 0.30 = 2.00.
Impurity defects
Adding ions of a different charge creates vacancies. When CdCl₂ is added to AgCl, each Cd²⁺ takes the place of one Ag⁺ but carries an extra positive charge, so a second Ag⁺ leaves, creating one cation vacancy per Cd²⁺. SrCl₂ added to NaCl acts the same way.
Worked example 3: vacancies from doping
NaCl is doped with 2 × 10⁻³ mol% SrCl₂. How many cation vacancies per mole of NaCl? Working: 2 × 10⁻³ mol% means 2 × 10⁻³ mol of SrCl₂ per 100 mol of NaCl, i.e. 2 × 10⁻⁵ mol per mol of NaCl. Each Sr²⁺ makes one vacancy, so vacancies = 2 × 10⁻⁵ × 6.022 × 10²³ = 1.20 × 10¹⁹ per mole of NaCl.
Schottky: pairs missing, density falls. Frenkel: ion moves to an interstitial site, density unchanged. Metal excess: F centres give colour. Metal deficiency: variable oxidation state (FeₓO). Impurity: each extra charge creates a vacancy.
Key takeaways: stoichiometric defects keep the formula; non-stoichiometric defects change it. F centres colour alkali halides; heated ZnO turns yellow; FeO is really FeₓO. Doping with higher-charged cations creates cation vacancies one for one.
Check your understanding
-
1. Which defect lowers the density of a crystal?
- Frenkel defect
- Schottky defect
- Interstitial cation and electron in ZnO
- A cation moving to an interstitial site
Show answer
Answer: B. In a Schottky defect equal numbers of cations and anions leave the crystal, so mass decreases while the volume stays almost the same: density falls. In a Frenkel defect the ion only moves within the crystal.
-
2. What is an F centre?
- A cation sitting in an interstitial site
- A missing cation-anion pair
- An anion vacancy occupied by an unpaired electron
- A foreign ion of higher charge
Show answer
Answer: C. When an alkali halide is heated in the metal's vapour, electrons occupy the sites left empty by anions. Such an anion vacancy holding an electron is an F centre; it absorbs visible light and colours the crystal.
-
3. Which of these shows a metal deficiency defect?
- Fe₀.₉₄O
- NaCl heated in sodium vapour
- ZnO heated strongly
- AgBr with Ag⁺ in interstitial sites
Show answer
Answer: A. In Fe₀.₉₄O there are fewer iron ions than oxide ions; some Fe²⁺ are missing and others become Fe³⁺ to keep neutrality. Heated NaCl and ZnO show metal excess defects, and interstitial Ag⁺ in AgBr is a Frenkel defect.
-
4. Assertion: a Schottky defect lowers the density of a crystal. Reason: in a Schottky defect equal numbers of cations and anions are missing from the lattice. Choose the correct option.
- Both true; reason explains assertion
- Both true; reason does not explain assertion
- Assertion true, reason false
- Both assertion and reason are false
Show answer
Answer: A. Both statements are true, and because ions are actually missing (mass lost while volume stays nearly the same), the reason explains why the density falls.
-
5. AgCl is doped with CdCl₂ so that the mole fraction of Cd²⁺ is 1 × 10⁻⁴. How many cation vacancies are there per mole of AgCl?
- 6.022 × 10²³
- 1.2 × 10²⁰
- 3.0 × 10¹⁹
- 6.0 × 10¹⁹
Show answer
Answer: D. Each Cd²⁺ replaces two Ag⁺ (one site occupied, one left vacant), so vacancies = moles of Cd²⁺ = 1 × 10⁻⁴ mol per mole. Number = 1 × 10⁻⁴ × 6.022 × 10²³ = 6.0 × 10¹⁹.
Sign in to keep track of the lessons you finish.