Revision notes

Unit 6 Solid State: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Solids: crystalline, amorphous and the four kinds of crystals

Crystalline and amorphous solids compared
PropertyCrystalline solidsAmorphous solids
ArrangementLong range orderShort range order only, random overall
ShapeDefinite, with flat facesIrregular
Physical properties with directionAnisotropic: differ with directionIsotropic: same in all directions, like liquids
NatureTrue solidsPseudo solids or supercooled liquids
Heat of fusionDefiniteNot definite
MeltingSharp melting pointSoften over a range of temperature, so can be moulded
ExamplesNaCl, diamond, quartzGlass, rubber, plastics

Classification of crystalline solids

  • Ionic Cations and anions, electrostatic attraction
    • NaCl, KCl
  • Covalent (network) Atoms joined by covalent bonds in 3-D
    • Diamond, SiC, SiO₂
  • Molecular Molecules held by weaker forces
    • Non-polar: dispersion forces
    • Polar: dipole-dipole
    • Hydrogen bonded: ice, glucose, urea
  • Metallic Positive ions in a sea of electrons
    • Cu, Fe, Ag, Au, brass

Particles and forces decide properties: ions → hard, brittle, conduct only when molten or dissolved; covalent network → very hard, very high melting; molecules → soft, low melting; metal ions + electrons → conduct as solids.

Key takeaways: crystalline solids have long range order, sharp melting points and anisotropy; amorphous solids are isotropic and soften over a range. Crystalline solids are ionic, covalent, molecular (non-polar, polar, hydrogen bonded) or metallic.

Read the full lesson

Lesson 2

Crystal lattice, unit cells and crystal systems

Crystal systems: edges and angles
SystemEdgesAnglesBravais lattices
Cubica = b = cα = β = γ = 90°Primitive, body-centred, face-centred (3)
Tetragonala = b ≠ cα = β = γ = 90°Primitive, body-centred (2)
Orthorhombica ≠ b ≠ cα = β = γ = 90°Primitive, body-, face-, end-centred (4)
Hexagonala = b ≠ cα = β = 90°, γ = 120°Primitive (1)
Rhombohedral (trigonal)a = b = cα = β = γ ≠ 90°Primitive (1)
Monoclinica ≠ b ≠ cα = γ = 90°, β ≠ 90°Primitive, end-centred (2)
Triclinica ≠ b ≠ cα ≠ β ≠ γ ≠ 90°Primitive (1)
Atoms per cubic unit cell
Unit cellPositionsAtoms per cellCoordination number
Simple cubic (sc)8 corners8 × 1/8 = 16
Body-centred cubic (bcc)8 corners + 1 body centre8 × 1/8 + 1 = 28
Face-centred cubic (fcc)8 corners + 6 face centres8 × 1/8 + 6 × 1/2 = 412

The three cubic unit cells

  • Simple cubic
    • Atoms at corners only
    • 1 atom per cell
    • CN = 6
    • Atoms touch along an edge: a = 2r
  • Body-centred cubic
    • Corners + body centre
    • 2 atoms per cell
    • CN = 8
    • Atoms touch along the body diagonal: √3a = 4r
  • Face-centred cubic
    • Corners + face centres
    • 4 atoms per cell
    • CN = 12
    • Atoms touch along a face diagonal: √2a = 4r

Corner 1/8, edge 1/4, face 1/2, body 1. So sc = 1, bcc = 2, fcc = 4 atoms per unit cell.

Key takeaways: a unit cell is fixed by a, b, c, α, β, γ; there are 7 crystal systems and 14 Bravais lattices. Shares: corner 1/8, face 1/2, body 1. sc, bcc and fcc contain 1, 2 and 4 atoms with coordination numbers 6, 8 and 12.

Read the full lesson

Lesson 3

Bragg's equation and density of a cubic crystal

nλ = 2d sin θ, so d = nλ/(2 sin θ). λ = X-ray wavelength, θ = angle of diffraction, n = order of diffraction (1, 2, 3 ...), d = spacing between successive planes.

— Bragg's equation

ρ = nM / (a³ N_A). Put a in cm to get ρ in g cm⁻³: 1 pm = 10⁻¹⁰ cm, so a³ in cm³ = (a in pm)³ × 10⁻³⁰.

Where atoms touch in each cubic cell
CellAtoms touch alongRelationRadius
scan edgea = 2rr = a/2
bccthe body diagonal (√3 a)√3 a = 4rr = √3 a/4
fcca face diagonal (√2 a)√2 a = 4rr = a/(2√2) = √2 a/4

Key takeaways: nλ = 2d sin θ. ρ = nM/(a³N_A); convert pm to cm (× 10⁻¹⁰) before cubing. Radii: sc a/2, bcc √3a/4, fcc a/(2√2). Number of unit cells = number of atoms ÷ n.

Read the full lesson

Lesson 4

Packing of spheres, voids and packing efficiency

hcp and ccp

  • Hexagonal close packing
    • Layer pattern aba ab...
    • Third layer directly above the first
    • Coordination number 12
    • Packing efficiency 74%
  • Cubic close packing
    • Layer pattern abc abc...
    • Third layer above octahedral voids of the first
    • Coordination number 12
    • Same as fcc; packing efficiency 74%

For n close-packed spheres there are n octahedral voids and 2n tetrahedral voids.

Packing efficiency = (volume occupied by spheres in the unit cell ÷ volume of the unit cell) × 100

Radius ratio and structure
r₊/r₋Coordination numberArrangementExample
0.155-0.2253Trigonal planarB₂O₃
0.225-0.4144TetrahedralZnS
0.414-0.7326OctahedralNaCl
0.732-1.08CubicCsCl

Key takeaways: square layer CN 4, hexagonal layer CN 6. sc 6 / 52.4%, bcc 8 / 68%, hcp and ccp 12 / 74%. n spheres give n octahedral and 2n tetrahedral voids. Radius ratio 0.225, 0.414 and 0.732 are the boundaries for CN 4, 6 and 8.

Read the full lesson

Lesson 5

Imperfections in solids: point defects

Point defects in ionic solids

  • Stoichiometric (intrinsic, thermodynamic)
    • Schottky defect
    • Frenkel defect
  • Non-stoichiometric
    • Metal excess defect
    • Metal deficiency defect
  • Impurity defects
    • Foreign ions of different charge create vacancies
Schottky and Frenkel defects
FeatureSchottky defectFrenkel defect
What happensEqual numbers of cations and anions are missing from their sitesAn ion (usually the small cation) leaves its site and moves to an interstitial position
Ion sizesCation and anion of similar sizeCation much smaller than anion
DensityDecreases (mass is lost from the same volume)Unchanged (nothing leaves the crystal)
ExamplesNaCl, KCl, CsClAgBr, ZnS, AgCl

Schottky: pairs missing, density falls. Frenkel: ion moves to an interstitial site, density unchanged. Metal excess: F centres give colour. Metal deficiency: variable oxidation state (FeₓO). Impurity: each extra charge creates a vacancy.

Key takeaways: stoichiometric defects keep the formula; non-stoichiometric defects change it. F centres colour alkali halides; heated ZnO turns yellow; FeO is really FeₓO. Doping with higher-charged cations creates cation vacancies one for one.

Read the full lesson

Privacy · Terms · Refunds · Delivery