• Practice
  • About 16 min
  • 5 practice questions

Organising data: range, array and frequency distribution

Find the range of a data set, arrange raw data into an array, and build a frequency distribution using classes, class limits, midpoints, class intervals, tally marks and frequencies.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Calculate the range and arrange data as an array.
  • Explain class, class limits, midpoint, class interval, tally marks, class frequency and total frequency.
  • Build a frequency distribution table from raw data.

Raw data, a long list of numbers in the order they were collected, says little at first sight. Before any analysis, data must be classified and arranged, and a large mass of figures reduced to a compact table. This is the organisation of data.

Range and array

The range is the difference between the highest and the lowest values: Range = Highest value - Lowest value. It tells you how spread out the data are. An array is an orderly arrangement: raw numerical data arranged in ascending or descending order.

Worked example 1: range and array

Made-up daily maximum temperatures (°C) for a week: 34, 37, 31, 36, 33, 38, 35. Array (ascending): 31, 33, 34, 35, 36, 37, 38. Range = 38 - 31 = 7 °C. The array also shows at once that the middle value is 35 °C.

Terms of a frequency distribution

A frequency distribution arranges data into classes and counts how many observations fall in each.

Terms used, with the class 10-20 as an example
TermMeaningFor 10-20
ClassA group into which the variable is divided10-20
Class limitsThe extreme values of a class: lower limit and upper limitLower 10, upper 20
Midpoint(Lower limit + upper limit) ÷ 2(10 + 20) ÷ 2 = 15
Class intervalUpper limit - lower limit20 - 10 = 10
Tally marksA stroke for each observation; every fifth stroke is drawn across the previous four|||| for 4, a crossed group for 5
Class frequencyNumber of observations in the classThe count of tallies in 10-20
Total frequencyThe sum of all class frequencies, equal to the number of observationsN

In classes such as 10-20, 20-30, a value of exactly 20 must go into only one class. The usual rule, used here, is that a class includes its lower limit but not its upper limit: 20 goes into 20-30.

Worked example 2: building a frequency table (made-up data)

Thirty made-up test marks (out of 50): 12, 27, 34, 8, 45, 22, 31, 38, 19, 26, 41, 33, 24, 15, 29, 36, 48, 21, 30, 27, 17, 39, 25, 44, 32, 28, 6, 35, 23, 37. Step 1, range = 48 - 6 = 42. Step 2, choose 5 classes of interval 10: 0-10, 10-20, 20-30, 30-40, 40-50. Step 3, go through the list once, putting a tally against the class of each mark. Step 4, count the tallies.

Frequency distribution of the made-up marks
ClassMidpointTally (count)Frequency
0-1058, 62
10-201512, 19, 15, 174
20-302527, 22, 26, 24, 29, 21, 27, 25, 28, 2310
30-403534, 31, 38, 33, 36, 30, 39, 32, 35, 3710
40-504545, 41, 48, 444
Total30

Check: 2 + 4 + 10 + 10 + 4 = 30, the number of marks. The mark 30 went into 30-40, following the lower-limit rule. The table shows at once that most students scored between 20 and 40.

Range = highest - lowest. Midpoint = (lower + upper) ÷ 2. Class interval = upper - lower. Total frequency = sum of class frequencies = number of observations.

From raw data to a frequency table

  1. Raw data Figures in the order collected.
  2. Range Highest - lowest, to decide classes.
  3. Classes Equal intervals that cover the range without overlap.
  4. Tally One stroke per observation, in groups of five.
  5. Frequencies Count, then check the total.

Key takeaways: organising data reduces raw figures to a usable form. Range = highest - lowest; an array is data in ascending or descending order. A frequency distribution groups data into classes with lower and upper limits, a midpoint and a class interval, counted with tally marks into class frequencies whose sum is the total frequency.

Check your understanding

  1. 1. Made-up data: 14, 9, 21, 17, 6, 25, 11. The range is:

    1. 19
    2. 25
    3. 16
    4. 31
    Show answer

    Answer: A. Range = highest - lowest = 25 - 6 = 19.

  2. 2. The midpoint of the class 40-60 is:

    1. 20
    2. 50
    3. 100
    4. 60
    Show answer

    Answer: B. Midpoint = (40 + 60) ÷ 2 = 100 ÷ 2 = 50. 20 is the class interval.

  3. 3. Raw data arranged in ascending or descending order is called:

    1. a class
    2. a tally
    3. a frequency
    4. an array
    Show answer

    Answer: D. An array is an orderly arrangement of raw numerical data in ascending or descending order.

  4. 4. The class interval of the class 25-35 is:

    1. 30
    2. 60
    3. 10
    4. 25
    Show answer

    Answer: C. Class interval = upper limit - lower limit = 35 - 25 = 10. 30 is the midpoint.

  5. 5. In a frequency table with class frequencies 3, 7, 12, 5 and 3, the total frequency is:

    1. 12
    2. 30
    3. 5
    4. 25
    Show answer

    Answer: B. Total frequency = 3 + 7 + 12 + 5 + 3 = 30, the number of observations.

Privacy · Terms · Refunds · Delivery