- Practice
- About 18 min
- 5 practice questions
Secondary activities: location of industries and Weber's theory
Explain the factors that decide where industries locate, apply Weber's least-cost theory to weight-losing and weight-gaining industries, and classify industries by size, ownership, labour, raw material and product.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the seven factors of industrial location given in the textbook.
- Use Weber's least-transport-cost principle to locate an industry.
- Classify industries on six bases.
The secondary sector transforms raw materials from the primary sector into goods. Because it adds value to raw materials it is also called the value-addition sector. Industries need energy, factories and machinery, and they support both the primary sector (by buying its output) and the tertiary sector (by supplying goods to trade and transport).
Factors affecting the location of industries
- Raw materials: industries locate where raw materials are abundant and cheap, especially when they are bulky or lose weight in processing. The textbook's example: oil refining at Visakhapatnam, where crude is imported through the port.
- Power: early industries clustered near coal mines; electricity freed them, but power-hungry industries such as aluminium still locate near hydroelectric projects.
- Transport costs: both raw materials and finished goods must be moved; industries locate where total transport cost is lowest.
- Nearness to market: a chief factor in modern times.
- Labour: plentiful, cheap labour helped the cotton textile industry grow around Mumbai.
- Government policy: incentives, land, water, tax concessions and infrastructure attract industry to backward regions.
- Capital: the most essential factor for setting up any industry.
Weber's theory of industrial location
Alfred Weber built a theory around the least-cost principle, with transport cost as the key. He assumed that some resources occur only in certain places while others, such as water, are ubiquitous; that markets are at specific places; that transport cost depends on the weight carried and the distance; and that there is competition in markets. He used a locational triangle: two raw material sources R1 and R2 at the base, the market M at the apex, and the factory at P where total transport cost is lowest.
Weber's three cases
-
Weight-losing industry
- Raw materials lose much weight in processing
- Carrying raw materials costs more than carrying products
- Locate at or near the raw material
-
Weight-gaining industry
- Product is heavier or bulkier than the raw materials
- Carrying the product costs more
- Locate at the market
-
Balanced case
- Neither dominates
- Locate at P inside the triangle where total cost is least
- The optimal industrial location
Worked example 1: a weight-losing industry
Made-up data: 4 tonnes of ore make 1 tonne of metal. The ore field R is 100 km from market M. Transport costs ₹10 per tonne-km for both ore and metal. For each tonne of metal: factory at R: carry 1 t of metal 100 km = 1 × 100 × 10 = ₹1,000. Factory at M: carry 4 t of ore 100 km = 4 × 100 × 10 = ₹4,000. Locating at the raw material saves ₹3,000 per tonne, so a weight-losing industry goes to R. Sugar mills near cane fields follow this logic.
Worked example 2: a weight-gaining industry
Made-up data: a soft-drink plant uses 0.2 t of concentrate and sugar, brought from R 200 km away, and adds water (available everywhere) to make 1 t of bottled drink. Cost ₹10 per tonne-km. Factory at R: carry 1 t of drink 200 km = ₹2,000. Factory at M: carry 0.2 t of ingredients 200 km = 0.2 × 200 × 10 = ₹400. Locating at the market saves ₹1,600 per tonne. Weight-gaining industries, which add ubiquitous materials, locate at the market.
Classification of industries
| Basis | Types and examples from the textbook |
|---|---|
| Size of raw material and product | Heavy (iron and steel); light (electric fans, sewing machines) |
| Ownership | Private (Bajaj Auto, TISCO); public (BHEL, Bhilai and Durgapur steel plants); joint (Gujarat Alkalies, Oil India); co-operative (farmer-run sugar mills) |
| Labour and capital | Large-scale (cotton and jute textiles); small-scale (nuts and bolts, coir, match boxes); cottage (home-based weaving, pottery) |
| Source of raw material | Agro-based (cotton, jute, sugar, vegetable oil); mineral-based (iron and steel, aluminium, cement); pastoral-based (hides, dairy); forest-based (paper, lac, resin, baskets) |
| Nature of product | Basic (iron and steel, textile machinery used by other industries); consumer (television, soap, biscuits) |
Key takeaways: industries locate by raw materials, power, transport cost, market, labour, government policy and capital. Weber's least-cost theory sends weight-losing industries to the raw material, weight-gaining industries to the market, and balanced ones to the point of least total transport cost. Industries are classified by size, ownership, labour, raw material and product.
Check your understanding
-
1. Why is the secondary sector called the value-addition sector?
- It extracts raw materials from nature
- It provides services for payment
- It transforms raw materials into goods of greater value
- It is controlled only by the government
Show answer
Answer: C. Manufacturing converts raw materials into finished goods, adding value to them.
-
2. According to Weber, a weight-losing industry should be located:
- at or near the source of raw material
- at the market
- as far from both as possible
- only at a port
Show answer
Answer: A. When raw materials lose much weight, carrying them costs more than carrying the product, so the least-cost site is near the raw material.
-
3. Made-up data: 3 t of cane make 1 t of sugar; the cane field is 50 km from the market; transport costs ₹20 per tonne-km. How much is saved per tonne of sugar by locating the mill at the cane field rather than the market?
- ₹1,000
- ₹3,000
- ₹1,500
- ₹2,000
Show answer
Answer: D. Mill at field: carry 1 t sugar 50 km = 1 × 50 × 20 = ₹1,000. Mill at market: carry 3 t cane = 3 × 50 × 20 = ₹3,000. Saving = 3,000 − 1,000 = ₹2,000.
-
4. A sugar mill owned and run by the cane farmers themselves is a:
- public sector industry
- co-operative sector industry
- joint sector industry
- cottage industry
Show answer
Answer: B. Industries owned and run co-operatively by the producers of the raw material, such as farmers' sugar mills, are co-operative sector industries.
-
5. Why are aluminium plants often located near hydroelectric projects?
- Aluminium needs large amounts of cheap power
- Bauxite is found only in rivers
- Dams provide cheap labour
- Aluminium is a weight-gaining product
Show answer
Answer: A. The textbook cites aluminium units near hydel projects as an example of power as a location factor; smelting aluminium needs much electricity.
Sign in to keep track of the lessons you finish.