- Practice
- About 15 min
- 5 practice questions
Sensors and image processing: active and passive remote sensing
Distinguish active and passive sensors by energy source and spectral region, and explain image restoration, image enhancement and information extraction.
If something looks wrong, please tell us.
By the end of this lesson you can
- Distinguish active from passive remote sensing.
- Give examples of active and passive sensors.
- Explain the three stages of image processing and why their order matters.
Some satellites can see through clouds and at night; others only work in daylight. The difference lies in where the sensor's energy comes from.
Passive and active remote sensing
The textbook compares the two with photography: passive remote sensing is like taking a photograph with an ordinary camera in daylight, while active remote sensing is like using a camera with a built-in flash.
Passive and active remote sensing
-
Passive
- Depends on sunlight (or energy naturally emitted)
- Works mainly in visible and infrared bands, about 0.4-1.0 micrometres for reflected light
- Solar-reflective sensors work only in daylight
- Like a camera without flash
-
Active
- Sends its own energy and records the echo
- Works mainly in the microwave region, wavelengths longer than 1 mm
- Works day and night, and microwaves pass through cloud
- Examples: Synthetic Aperture Radar (SAR), laser systems, fluorosensor
(The textbook prints the passive range as 0.4 to 1.0 mm; the correct unit is micrometres, μm. Visible light runs from about 0.4 to 0.7 μm.) A laser system is a clear active example: it fires a beam of known wavelength at the ground and times how long the reflection takes to return.
Worked example 1: converting wavelength units
1 mm = 1,000 μm. Active sensors use wavelengths longer than 1 mm, that is longer than 1,000 μm. Passive reflective sensing uses about 0.4-1.0 μm. Compare: 1,000 ÷ 1.0 = 1,000, so the shortest active (microwave) wavelengths are about 1,000 times longer than the longest of these passive wavelengths. Longer microwaves are not stopped by cloud droplets, which is why radar can see through monsoon clouds.
Transmission and processing
Energy recorded by the sensor is transmitted electronically to a receiving and processing station, where it is turned into an image. Image processing has three functional stages:
Stages of image processing
- Image restoration Correct errors, noise and geometric distortion so the image resembles the original scene
- Image enhancement Modify the image to improve its visual impact for the viewer
- Information extraction Computers produce corrected images; a human decides what the information means
Restoration comes first because enhancement deliberately changes the original digital values; enhancing an uncorrected image would build errors into the result. Restoration is relatively simple because each band's pixels are processed separately. In information extraction, the computer makes no decisions: a human operator instructs it and evaluates the significance of what is extracted.
Worked example 2: active or passive?
Situation A: during the north-east monsoon, officials need flood maps of the Cauvery delta under thick cloud at night. Reasoning: sunlight-dependent sensors cannot work at night and cannot see through cloud. Use active (SAR radar). Situation B: on a clear sunny day, agronomists want the green colour of crops. Reasoning: reflected visible and near-infrared light carries crop-colour information. Use passive optical sensors.
Worked example 3: timing a laser pulse
A laser pulse from an aircraft returns after 0.000002 s (2 microseconds). Light travels at about 300,000,000 m/s. Distance travelled = 300,000,000 × 0.000002 = 600 m. This is the round trip, so the height of the aircraft above the ground is 600 ÷ 2 = 300 m. Measuring many such pulses builds a detailed height map.
Passive = sunlight, visible and infrared, daytime. Active = own energy (radar, laser), microwaves, day and night, through cloud. Process: restore, then enhance, then extract.
Key takeaways: passive sensors record reflected sunlight in the visible and infrared, mainly by day; active sensors provide their own energy, mostly microwaves, and work day and night through cloud. Processing restores the image, then enhances it, then extracts information with human judgement.
Check your understanding
-
1. Synthetic Aperture Radar (SAR) is an example of:
- a passive sensor
- an active sensor
- a GIS software
- a GNSS receiver
Show answer
Answer: B. SAR sends out its own microwave energy and records what returns, so it is an active sensor.
-
2. Why can active microwave sensors map floods under monsoon clouds at night?
- They use their own energy and microwaves pass through cloud
- They rely on moonlight
- They work only in visible light
- Clouds reflect sunlight to them
Show answer
Answer: A. Active sensors supply their own illumination, so they work at night, and long microwave wavelengths penetrate clouds.
-
3. Why is image enhancement done only after restoration?
- Enhancement is cheaper
- Restoration needs a human decision
- Enhancement alters the original digital values, so errors must be corrected first
- Restoration changes the colours
Show answer
Answer: C. Enhancement distorts the original values, so restoration must first correct noise and distortion.
-
4. A laser pulse returns after 4 microseconds (0.000004 s). Taking light speed as 300,000,000 m/s, the sensor's height above the ground is:
- 1,200 m
- 300 m
- 2,400 m
- 600 m
Show answer
Answer: D. Round trip = 300,000,000 × 0.000004 = 1,200 m. Height = 1,200 ÷ 2 = 600 m.
-
5. In the information extraction stage, who decides the significance of the extracted information?
- The satellite
- A human operator
- The sun
- The receiving antenna
Show answer
Answer: B. The textbook stresses that the computer makes no decision; the human operator instructs it and evaluates the information.
Sign in to keep track of the lessons you finish.